Question about 2003 Toyota ECHO

1 Answer

2003 Toyota Echo radio/clock not working.

The other day the clock(digital) and radio (am/fm, cassette, cd) just shut off on my 2003 echo. No power to it at all. Everything else electrical, everything else on the dashboard is working fine. I checked the fuse for it, it wasn't blown. Tried replacing it anyway, but no luck. Went through every other 15 fuse, still nothing. Any ideas?

Posted by on

  • Anonymous Mar 12, 2014

    I have a 2000 toyota echo , the radio is hooked up but the speakers wont work what do i do ?

  • Anonymous Mar 26, 2014

    LIGHTER OUT, RADIO OUT AND CLOCK OUT, WHAT IS THE PROBLEM?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Disconnect your negative battery cable for about 10min. After you re-connect, the stereo should reset itself and start functioning. Best of luck!
Greg

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Toyota Echo. Open door symbol came on after hitting the dash trying to get the digi clock to work. no its off again. what could be the problem?


2003 echo Visit the on-line store, known as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.

Dec 18, 2017 | Toyota Cars & Trucks

2 Answers

Lost sound on 2005 impala. radio works. seems like amp problem.


Do you have base or up;level system ?

Table 1: Radio Features
Table 2: Cassette Features
Table 3: Compact Disc Features
Table 4: XM Advisory Messages
The radio receives power from the RADIO fuse in the junction block-right I/P. Ground is provided via G201 and G202. The radio is enabled/disabled by class 2 messages from the body control module (BCM). The radio routes audio signals from the digital radio receiver or the vehicle communication interface module (VCIM) to the speakers and/or amplifier when directed by class 2 messages.
The Entertainment System on this vehicle is configured with an AM/FM stereo radio with the radio data system (RDS) and either a cassette player or a CD player or both. CD and cassette. The uplevel system provides the customer with extended range speakers and an audio amplifier. Satellite digital radio (U2K) is available with uplevel systems.
The following list shows the radios available for this vehicle:
• Radio (ULO) - AM/FM Stereo, Cassette with RDS
• Radio (UNO) - AM/FM Stereo, CD and RDS
• Radio (UPO) - AM/FM Stereo, Cassette with CD and RDS .The complexity of the radio systems on these vehicle is mind blowing .

Your best bet take it to a GM dealer , has features you are unawear of .
DTC B1025, B1035, B1045, or B1055
When the radio is powered up, the radio supplies low level audio signals to the speakers. If the vehicle is equipped with an audio amplifier, the amplifier will boost the signal sent to the speakers.
DTC B1025 Audio Output Circuit
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With the scan tool, monitor the DTC Information for DTC B1025.
Does the scan tool indicate that DTC B1025 is current?

Jan 31, 2017 | Cars & Trucks

1 Answer

I have a 2002 Grand Cherokee Jeep and the issue is that the radio/clock display is blank 99% of the time even though everything else on the stereo works fine (radio, cassette deck, 10 CD changer etc)


If all fuses are good ,then that is a bad display
bad radio,.
bad is bad...
get the radio fixed, ($$$$)
or upgrade for same price.
hmmmmmm...??????

cassettes are like, cave man tech, now.
and CD near.
we use, usb mp3 here. up grade

Nov 06, 2016 | 2002 Jeep Grand Cherokee

1 Answer

Toyota echo 2002 cd player (without cassette, marked 31804) Radio works fine, but when a put on a cd, it reads it and starts playing... with no sound. Any ideas? Thanks a lot


well , as with all discs, old player will NOT play all CDs.
not even close.
first ask an old guy for CDDA disk or buy one from walfart.
then try that, only these disks work in all players.
other disks may or will not work.
like DVD-R, CD-R and any other recordable disks will fail.
that is the acid test, if the CDDA disk works (real audio disk)
works then the drive is ok, if not, its bad. simple as apple pie.

Nov 14, 2014 | 2002 Toyota ECHO

1 Answer

2004 Toyota Echo - had the battery changed...


If you had FM stations programmed before the battery was changed, you need to go back and reprogram them

Dec 01, 2012 | 2004 Toyota ECHO

1 Answer

I was attempting to install a new stereo in my 2000 taurus. it requires to an adapter to put the new stereo in. i got the new adapter and stereo in *kinda* but decided i didnt really know what i was...


check your fuses first. You may have blown one.


Visual Inspection Chart Mechanical Electrical
  • Integrated control panel (ICP) physically damaged, misaligned, any control(s) inoperative
  • Digital audio compact disc player physically damaged, misaligned, any control(s) inoperative
  • Antenna or antenna cable physically damaged, misaligned connection(s)
  • Radio speakers, mounting/speaker cones physically damaged, misaligned
  • Radio ignition interference capacitors, radio frequency interference suppression bond misaligned (also check for cleanliness and metal-to-metal contact)
  • Battery junction box (BJB) fuses F127 (5A), F117 (20A), F127 (5A).
  • Central junction box (CJB) fuse F227 (10A) F211 (15A), F216 (15A), F226 (10A) (wagon only)

  1. If the fault is not visually evident, proceed to diagnose the integrated control panel (ICP) by entering the ICP Self-Diagnostic Mode.
ICP Self-Diagnostic Mode
NOTE: To enter the ICP Self-Diagnostic Mode, the ICP must be ON and in radio tuner mode (AM/FM).
  1. Enter the diagnostic mode by pressing and holding preset buttons 3 and 6 simultaneously. This will suspend all radio functions, and display SP.
  1. Preset Button 1 = Audio internal/external SELF TEST. The display will flash SELF while gathering the diagnostic trouble codes (DTCs), then stop flashing when complete. Press the TUNE UP button to display the DTCs if any exist. Record codes and refer to the following table:


ICP SELF-TEST CODES Code Description 0 No diagnostic trouble codes logged 1 No response from rear chassis unit (RCU) 2 No response from cassette player 3 - 4 No response from compact disc player 5 - 6 - 7 No response from remote climate control 8 - 9 Read Only Memory Verification failed
  1. Preset Button 2 = Displays the feature strap for code identification, refer to the following table.


Code Description 01 Base-Electronic Search Radio (ESR) with Manual Climate Control (MCC) 07 Electronic Search Radio with Cassette (ESC) with MCC 17 ESC with Electronic Automatic Temperature Control (EATC) 97 Not programmed default of ESC with EATC
  1. Preset Button 3 = ICP and RCU identification. This test identifies the software level of the ICP and RCU. The ICP is tested first, followed by the RCU. The display will have two sequences of three codes each. The first sequence is for the ICP, the second sequence is for the RCU. For code identification, refer to the following table:
syh~us~en~file=a0017877.gif~gen~ref.gif

Item Part Number Description 1 - Product variant code 2 - Tape model 3 - CDR


SOFTWARE IDENTIFICATION CODES Product Type Code Description Product Variant Code Description 21 ICP 07
08
09
10
11
12 EATC with AM/FM, cassette player and CD changer
EATC with AM/FM and cassette player
Manual A/C with AM/FM and cassette player
Manual A/C with AM/FM
EATC with AM/FM and cassette player
EATC with AM/FM cassette player and CD changer 31 RCU 01
02
03 Analog
Digital
Midline 71 Remote climate control 01 LH drive 52 Compact disc/disc jockey 01
02
03
04 Sony® 10 disc
Sony® 6 disc
Clarion® 6 disc
FMS 6 disc

Sep 13, 2011 | 2000 Ford Taurus

1 Answer

Where can I find the fuses for the radio? The CD player stopped


the cd player and radio should be on the same system or as a whole, it should all be not working, there may have been a short inside the cd player, check all the fuses in the fuse box look for 10amp and 15 amps usually. being a newer car it is odd. you may need to take it in to toyota for a diagnostic check. good thing about the electrics in cars these days is their computers tell you everything.

Jun 22, 2010 | 2003 Toyota Camry

2 Answers

How to reset the clock of a toyota echo 2003


1. Hold down the "AM" button until you hear a beep.
2. Use buttons "1" and "2" to set the clock.

Thank you for using fixya and good luck

Jun 11, 2010 | 2003 Toyota ECHO

Not finding what you are looking for?
2003 Toyota ECHO Logo

Related Topics:

1,263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...