Question about Hyundai Cars & Trucks

Open Question

Replace rear bearings on 2007 Hyundai Tiburon

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 566 Answers

SOURCE: 2003 Hyundai Tiburon Gt rear brakes

hi not conversant with the tiberon in uk but will try to help ? if you remove the rear wheel then look at the brake disc (rotor) most hyundai rear discs on uk models are secured to the rear hub by 2x screws posidrive or tork heads ? if this is so on yours then no problem you will have to remove the caliper first from the carrier 2xbolts h/brake off then undo 2xbolts securing caliper carrier tosuspension stub assy your disc /s are most probably vented discs? or may be standard discs? remove the screws then you may have to hit disc from behind with hammer to jolt free as they are sometimes rusted on due to high temps and rain ideal conditions to create rust as you prob know? re assemble is reverse hope this helps ?

Posted on Oct 24, 2008

  • 393 Answers

SOURCE: replacing rear wheel bearings on 1999 hyundai sonata

  1. for drum brakes with sealed hub(all one piece) remove lug nuts and wheel.
  2. spray penetrating oil around studs if there is a big phillips head screw visible remove it with impact driver/if not use big ballpeen hammer ,tap on flat of drum near studs(becareful not to hit them) until drum loosens(your creating a shockwave to loosen rust)
  3. once drum is off there are 4-bolts coming in from behind backing plate, remove them then hub should be able to be removed w/a little persuation from hammer.
with out sealed hub ,
  1. remove wheel
  2. remove dust cap,cotterpin,star washer(if equipped) do not re use cotter pin
  3. remove nut then washer, wiggle brake drum and front bearing will come out.
  4. put nut on shaft tighten 2-3 turns grab drum by sides and pull towards you this should remove drum leaving inner bearing/seal on shaft
  5. to replace reverse procedure making sure to pack new bearings w/grease(take drum and use long punch to remove bearing races, use race/seal installer to install new races
with disk brakes

  1. remove wheel
  2. remove caliper/bracket
  3. remove rotor
  4. remove 4-bolts from behind,tap old hub out
  5. reverse procedure



Posted on Nov 15, 2008

emissionwiz
  • 75807 Answers

SOURCE: Change front wheel bearings

u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 moreinfo.gif {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com

3bcf37f.jpg

Posted on Mar 12, 2009

michigan man
  • 3533 Answers

SOURCE: Rear wheel bearings on Hyundai Accent

no i do not believe they are press in there are held in by a seal try www.autozone.com to see if they have your car listed if they do you will be able to get a diagram showing you how they come a part.

Posted on Apr 24, 2009

ghost4548
  • 776 Answers

SOURCE: Replace fuel dorr, hyundai tiburon

I recommend you keep screwing with it till you get it right.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the whining noise when I start my 2007 tiburon gt .... Sounds like a turbo does when started


Could be almost anything. Transmission, power steering , alternator, idler pulley bearings, etc.
No easy answers without being there.

Oct 20, 2014 | 2007 Hyundai Tiburon

1 Answer

Flooded Hyundia Tiberon 2007


If your Hyundai, Tiburon refuses to start, it may be something more serious than a flooded engine. When the spark plugs look fine and the fuel injectors are running well, you may need a new charging or starting system for your car. If the starting system fails, then you need a new unit in order to get your Hyundai, Tiburon back on the road. The starting system in your Hyundai, Tiburon includes many parts such as the battery, ignition switch, starter motor and solenoid. Once you have the source of the problem contained, you have complete access to quality replacement parts here. Whether the battery dies or the ignition switch fails, you can find the parts you need for your Hyundai, Tiburon. Get your car back on the road when you check out this selection of charging and starting systems for your car.

Jul 22, 2012 | 2007 Hyundai Tiburon

1 Answer

2007 Hyundai Tiburon missing radio


Please contact this company for help with a radio that will fill your needs.
www.crutchfield.com

Jun 25, 2012 | 2007 Hyundai Tiburon

1 Answer

I was told the rear right hub bearing went out, so i ordered one from auto zone but it doesn't fit. It is to loose what do i do?? Also when i back up the car makes some really loud noises. (this just...


1st, take the hub bearing back to AutoZone and either get you money back or get them to order or give you the right size bearing. The noise you are having could be from that bearing.... ya think?

Sep 05, 2011 | 2006 Hyundai Tiburon

1 Answer

HIT A CURB WITH THE RIGHT REAR WHEEL AND HAVE HAD AN ESTIMATE TO REPLACE THE STRUT ASSEMBLY AND RIGHT REAR KNUCKLE AXLE CARRIER. HAVE TRIED TO PRICE PARTS FROM THE DEALER AND THEIR PARTS BREAKDOWN DON'T...


the repair shop probably is listed in assembled units like bearing and hub unit whereas the dealer lists the parts separately, hope this helps

Aug 06, 2010 | 2007 Hyundai Tiburon

1 Answer

I think the driver side rear wheel bearing ..2000 tiburon


Yes it is the rear bearing. It can be a home fix but you will need good tools and some spare time. Log on to the Hyundai Coupe Owners Club in the UK for guidance.

Oct 07, 2009 | Hyundai Motor 2000 Tiburon

2 Answers

Rear wheel bearing hyundai coupe


just remove the wheel and count the teeth on the ring on the rear brake thats all you need to do. Since you can't drive it take it off and take it in to compare parts so you don't have to go back twice. You will need a new wheel seal and race and bearings.

Sep 29, 2009 | 2001 Hyundai Tiburon

2 Answers

Did they make a repair manual for the 2001 Hyundai Tiburon ??


There are several sources from which to get your owner's and service manuals, including going to the manufacturer of the car, and these:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Owners_Manual_Lost_Need_Replacement.htm

May 25, 2009 | 2001 Hyundai Tiburon

1 Answer

Cant find info or book on repairing the front wheel bearrings on my car,or even a "manual" for a 2001 Hyundai Tiburon!


Yes autozone.com has a repair guide for your car,you will be able to get the steering knuckle off,this is where the bearing is but ir requires a press or an equivlant to remove and replace the bearing.

May 25, 2009 | 2001 Hyundai Tiburon

2 Answers

Can not get the rotors off my 97 hyundai tibaron


Hyundai Tiburon 96-01 uses a outer hub system. To replace front rotors. You'll need front bearings as well. The bearing and hub will need to be pressed out of the spindal. Then replacement of bearing will need to be pressed in. From a shop.Or they can use a slide hammer to remove ,but damages the bearing. Best to buy bearing and have cash for an alignment job too.Then replace front rotors. Rotor and hub install is ez after you get bearing pressed.Rear rotor and bearing are bolt on though.

Apr 06, 2009 | Hyundai Motor 1997 Tiburon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...