Question about 2004 Jeep Grand Cherokee

Open Question

What do code p0601 mean?

It backfires when you try starting it

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car shuts off while driving and says starting disabled Service throttle. Please Help! Check engine code says P0601


Definition of Diagnostic Trouble Code P0601 Category: Powertrain Definition: Internal Control Module Memory Check Sum ErrorNote: This definition of P0601 is applied to all manufacturers

Jun 18, 2015 | Cars & Trucks

2 Answers

Chrysler sebring code p0601


Hi Again,here's another link,to your P0601 code. P0601 OBD II Trouble Code

Jan 31, 2015 | 2002 Chrysler Sebring

1 Answer

I need the reason for the ecu error codes for a 2001 firebird 3.8L code #01 P0601,#02 P0606,#3 P1518


P0601 means your engine computer has an internal error; P0606 means that the engine computer has stored in memory exactly the running condition( much like a "black box") that the vehicle was in when the P0606 was triggered. P1518 also relates to the PCM in the matter of low voltage.

Try testing the battery as improper voltage can cause all of these codes. Otherwise it means that your PCM has failed and either needs to be reprogrammed or replaced.

Oct 31, 2010 | 2001 Pontiac Firebird

4 Answers

P0601 diagnostic code what is the mean , or whats is the problem


P0601 - Internal Control Module Memory Check Sum Error

Basically that means that there is an interal fault in the Powertrain Control Module (PCM). There have been many reported PCM failures on Chrysler/Dodge products although it is possible for this to happen on any vehicle. In Dodge/Chrysler products, a P0601 trouble code means that a serial communication failed inside the computer at least 6 times.

Symptoms: Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light. Typically the engine runs fine, gauges work, etc.

Causes: A code P0601 in most cases means the PCM has gone bad. This is possibly due to a short-circuit inside the PCM. Or, if you disconnect the wires/connector from the PCM while the battery is still connected, that may also cause this code.

Possible Solutions: With a P0601 OBD-II trouble code, the most common fix is to replace and reprogram the PCM. In a few cases the dealer may be able to reflash the PCM and get it working. But more than likely the PCM will need to be replaced and reprogrammed (we recommend you take it to a dealership for this). The good news is it *may* be covered under your emmissions warranty. So even if you're out of bumper-to-bumper warranty or powertrain warranty, check your warranty guide or dealer to see if this is covered.

Other people have reported that they cleared the code only for it to return again and again. Keep in mind that most shops can replace the PCM but not all can program it.

Other PCM / ECM Codes: P0602, P0603, P0604, P0605, P0606, P0607, P0608, P0609, P0610.

Hope this help to solve it (remember rated this).

Aug 03, 2010 | 2001 Dodge Stratus

1 Answer

Check engine light is on 3 codes p0740,p0601,& p0700 what do they mean


P0700 - Transaxle Control System Fault Conditions
The P0700 code is for information only and the next step is to check for transaxle codes in the Transaxle Control Module (TCM). So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.

P0740 - Torque Converter Clutch Circuit Malfunction

P0601 - Internal Control Module Memory Check Sum Error
What does that mean?
Basically that means that there is an interal fault in the Powertrain Control Module (PCM). There have been many reported PCM failures on Chrysler/Dodge products although it is possible for this to happen on any vehicle. In Dodge/Chrysler products, a P0601 trouble code means that a serial communication failed inside the computer at least 6 times.

Symptoms
Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light. Typically the engine runs fine, gauges work, etc.

Causes
A code P0601 in most cases means the PCM has gone bad. This is possibly due to a short-circuit inside the PCM. Or, if you disconnect the wires/connector from the PCM while the battery is still connected, that may also cause this code.

Possible Solutions
With a P0601 OBD-II trouble code, the most common fix is to replace and reprogram the PCM. In a few cases the dealer may be able to reflash the PCM and get it working. But more than likely the PCM will need to be replaced and reprogrammed (we recommend you take it to a dealership for this). The good news is it *may* be covered under your emmissions warranty. So even if you're out of bumper-to-bumper warranty or powertrain warranty, check your warranty guide or dealer to see if this is covered.

Other people have reported that they cleared the code only for it to return again and again. Keep in mind that most shops can replace the PCM but not all can program it.


Good luck!

Jun 02, 2010 | 1998 Chrysler Sebring

2 Answers

Diagnostic trouble codes P0125,P0601


P0125 OBD-II Trouble Code
Technical Description

Insufficient Coolant Temperature For Closed Loop Fuel Control
What does that mean?

This means that the engine coolant temperature (ECT) sensor indicates that the engine has not reached the required temperature level to enter closed-loop operation within a specified amount of time after starting the engine.
http://www.obd-codes.com/p0125

P0601 OBD-II Trouble Code
Technical Description

Internal Control Module Memory Check Sum Error
What does that mean?

Basically that means that there is an interal fault in the Powertrain Control Module (PCM). There have been many reported PCM failures on Chrysler/Dodge products although it is possible for this to happen on any vehicle. In Dodge/Chrysler products, a P0601 trouble code means that a serial communication failed inside the computer at least 6 times.
http://www.obd-codes.com/p0601

Jan 14, 2010 | 2004 Dodge Stratus

2 Answers

Engine light on


i was told the P0601 code for the chyrsler sebring is the ECM is this correct????

Mar 30, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...