Question about 2002 Hyundai Accent

2 Answers

Can't get the headlight out to replace blown bulb. Read manual but the instructions are worthless.

Posted by on

  • silver top May 11, 2010

    hi from uk you can renew both the headlamp bulbs and indicator bulbs without removal of h/lamp unit ! the one thing is the battery isrestriction for shovel size hands like mine but is still possible with patience if you check rear of lamp remove cover by twist to left this reveals h/light bulb held by a pivoted clip use the wifes compact mirror to see how it releases ? it is simple as for indicator bulb/s just twist the bulb holder left and release/pull out replace bulb and refit in hole then turn c/wise/right

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Hyundai Expert
  • 95 Answers

I've written a detailed step-by-step article on how to replace the headlight bulbs on a 1999-2005 Hyundai Accent:
How to Change Hyundai Accent Headlight Bulb Share Your Repair

Posted on Mar 19, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Http://www.hmaservice.com/.. register. Lots of shop manuals, wiring diagrams, etc.

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replace bulb headlight


Most of the headlights do not unbolt to change bulbs. If it's a blown bulb you're trying to replace, look on the back side of the headlight housing. There should be a plug with wires attached going into the back. This plug should twist either to the right,left or up or down. Once you've twisted this plug out of the headlight housing you'll see the bulb you need to replace. Unplug the wire harness from the blown bulb and place it into the new bulb, being careful not to touch the new bulb with your bare hands as any oil or other contamination will cause these bulbs to blow as soon as they are turned on. Place the new bulb with harness back into the socket in headlight housing and twist into position.

Oct 19, 2013 | 2001 Hyundai Accent

2 Answers

Headlight bulb replacement


Surprisingly, your owners manual is one of the best sources for information on headlight replacement and taillight replacement. I learned this a few years ago myself, it's the only repair instruction they put in a automobile owners manual.

Nov 29, 2011 | 2001 Chevrolet Cavalier

2 Answers

Replacing headlamps in a 2003 Elantra? Does the actual blub get replaced or do I have to replace the whole headlight?


just the bulbs u will have a high beam and a low beam the sockets are at the back of headlight assembly

Jan 28, 2010 | 2001 Hyundai Elantra

1 Answer

The driver's side headlight of a 2005 Trailblazer is blown. The manual does not give any instructions on how to replace it. Please advise.


should be a plastic ring around the bulb. twist it off and pull bulb out. some are very difficult to get at.

Jan 03, 2010 | 2005 Chevrolet TrailBlazer

2 Answers

I have read the owners manual word for word and followed it, but I cannot change the low beam bulb on my 2002 chrysler 300m


hi it not to hard there a couple of 10 mm bolts to take the headlights out then change the the bulb &reinstall headlight assy

Jul 10, 2009 | 2002 Chrysler 300M

1 Answer

Fuse panel


Unfortunately this is not a fuse issue. It would be if both headlights were blown. The fuse controls both headlights not just the one. I would be inclined to think either a.) you may have gotten a bad bulb from the store. or b.) you have a broken wire somewhere or c.) a ground wire broken. I would try replacing the bulb again just to eleminate that being the problem (and if its not you got a spare bulb just in case then) and go from there. Good luck and thanks for using fixya!

Sincerely,

JC

Jan 22, 2009 | 2001 Ford Taurus

1 Answer

Headlight blown


You just need the Bulb.

Jan 21, 2009 | 1997 Volkswagen Jetta

1 Answer

Driver side Headlight Replacement


I am car stupid. Just following the instructions in the owners manual, I was able to replace my low beam driver side bulb in less than a half hour. Only one tip. When it says pull straight up on the tab, definitely oil it first. I snapped the tab off and cut myself because it didn't have enough give.

Dec 18, 2008 | 2002 Chevrolet Malibu

5 Answers

How to remove/replace headlight bulb


I just replaced the bulb in the driver's side headlamp on my 2005 Scion xA without having to remove any screws, bolts or the grill. It's very simple, but it helps to have small hands. Just take the cover off the fuse box to allow more room for your hand. Reach in with your left hand and unplug the wiring assembly. Remove the rubber cover by using leatherman pliers. Squeeze the two sides of the spring clip together to release the bulb. Don't worry, the spring is hinged at the bottom, so you won't lose it. Take out old bulb & replace with new. Reverse steps, making sure you align the center hole of the rubber cover so that the three prongs of the bulb are protruding.

Nov 25, 2008 | 2005 Scion xA

2 Answers

Blown headlight


There are 3 or 4 bolts on the headlight housing that you have to remove first. Then pull the whole light assembly out from the front of the vehicle. You can then access the lights from the back of the housing assembly and replace the bulbs.
I was told by my local KIA dealer that if you buy the bulbs from them, they will replace them free of charge if they burn out. SLIM CHANCE being that KIA doesnt warranty anything, but that is what I was told. I have replaced the headlight bulbs atleast 6 times in 2 years.

Nov 17, 2008 | 2005 Kia Sedona

Not finding what you are looking for?
2002 Hyundai Accent Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...