Question about Cars & Trucks

Open Question

Number 4 cylinder wont fire - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

468 Chevelle
  • 81 Answers

SOURCE: wont start

Ignore the code for now. Start with the basics. You need to check fuel pressure. You need to check for spark at more than one cylinder. Must be blue and powerful. Make sure the vehicle can get air into the engine. report back with these answers.

Posted on Mar 27, 2009

agent91
  • 2100 Answers

SOURCE: What does miss fire on #4 cylinder mean. My engine

Should be the plug wire, I had the same problem here, I took a wire from another car just to check it and sure enough, it was the plug wires, Just replace the whole set and keep a couple for spares. Hope this helps.

Posted on Oct 11, 2010

Ironfist109
  • 3018 Answers

SOURCE: 2003 nissan altima is only firing on number 3 and

  • Please tell me what is your indicator that only two of four cylinders are firing? This will help me helps you better. Also include any testing you have done at all.

  • Check your firing order real quick too.





10_7_2011_3_59_31_am.jpg

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards,Tony

Posted on Oct 07, 2011

mosleymichae
  • 50 Answers

SOURCE: 99 chevy metro wont fire on 2 cylinders

Could be computer

Posted on Jul 13, 2012

petercw
  • 86 Answers

SOURCE: 1.8l 4 cylinder wont fire after replacing head cylinder?

rechk plugs firing order. chk soliniod and coil r ok, rechk fuel is getting into engine- choking usually determines that, u can smell the over choked engine. I f engine turning & choked hold throtel to floor while cranking and leave there until it fires. if no firing happends it must be electrical. rechk electrical connections. Cheers

Posted on Aug 29, 2012

Testimonial: "best advice"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What causes my 2001 mitsubishi GDI car to be firing only on number 2 and 3 cylinders


Check to see if #1 &4 use a common coil pack. If so, = likely culprit.

Jan 15, 2015 | Mitsubishi Cars & Trucks

2 Answers

Firing order on Honda civic ex 1.6l 1998 witch is number one cylinder


the firing order is 1-3-4-2. number one cylinder is to the left. hope this helps

Mar 04, 2012 | 1998 Honda Civic

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

2 Answers

What is the fireing order on a 1998 Ford winstar


Firing order and cylinder numbering - all 3.0 and 3.8 engines:


Firing order:

1-4-2-5-3-6


Cylinder numbering:

  • Windshield side
    1--2--3
    4--5--6
    Frt. Of vehicle




Coil numbering:
    • --4 PIN--
      ----------------
      --1--- 2--- 3--
      ----------------
      --5--- 6--- 4--
      ----------------

  • NOTE the irregular sequence on the 5-6-4 side. Weird, but that's the way it is.

Sep 27, 2010 | 1998 Ford Windstar

2 Answers

Firing order diagram ford taurus v6 3.06 6 cylinder engine, and which one is the number 1


FIRING ORDER IS 1 4 2 5 3 6. STANDING IN FRONT OF CAR ON PASSENGER SIDE FIRST CYLINDER FRONT IS 1 2 3 ON DRIVER SIDE FIRST CYLINDER FACING YOU ARE 4 5 6 SEE 1 CYLINDER FACING YOU ON PASSENGER SIDE.GET A PIECE OF PAPER WRITE NUMBER ON TOP ACROSS LARGE NUMBERS 3 2 1 AND BOTTOM OF PAPER WRITE NUMBERS 4 6 5 THATS COILS WIRES FIRING ORDER TO SPARK PLUGS.

Sep 26, 2010 | 2000 Ford Taurus

1 Answer

WHAT IS THE FIRING ORDER FOR A 1998 FORD EXPLORER


google "ford explorer firing order"

4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 4.0L SOHV Firing Order Firing order for the 4.0 liter SOHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 5.0L Firing Order Firing order for the 5.0 liter V8 is
  • 1-3-7-2-6-5-4-8
http://autorepair.about.com/od/enginefiringorders1/ How to Find the Cylinder Order V6 When standing in the front of the vehicle the cylinders are numbered 1-3 up the passenger's side and 4-6 up the driver's side. How to Find the Cylinder Order V8 When standing in the front of the vehicle the cylinders are numbered 1-4 up the passenger's side and 5-8 up the driver's side.

Jun 07, 2010 | 1998 Ford Explorer

1 Answer

Need diagram for firing order. Number 2 not firing. Need diagram for where leads attach to power pack.


For the 1995 Mercedes-Benz C-Class: C220, C280, C36
I do not know if you have the 2.2L; 2.8L or 3.6L Engine; however I have included all below.

For the 2.2L DOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
(back)
|...4...|
|...3...|
|...2...|
|...1...|
(front)

For the 2.8L AND 3.6L DOHC In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
|...6...|
|...5...|
|...4...|
|...3...|
|...2...|
|...1...|
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 19, 2010 | 1995 Mercedes-Benz C-Class

2 Answers

Need firing order and, I need to know what side the number one piston is on?


To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.

The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.
If a coil is replaced on any of the 3.1L, 3.4L or 3.8L engines, it may not be numbered, as is the factory coil. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your guide to reflect how your engine is wired.

f6067f3.jpg

Fig. 3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0726c45.jpg

Fig. 3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0476e1c.jpg

Fig. 3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

174502a.jpg

Fig. 3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

69d9a4f.jpg

Fig. 3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

806db5e.jpg

Fig. 3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.
The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6

Hope helped (remember rated this help) Good luck.


Oct 19, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

Ignition firing order and cable position at the coils


The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.

63b44ad.jpg


3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.


f3c010c.jpg

3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



e2e44c2.jpg

3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



81eff27.jpg

3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System




The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6.



50dbf18.jpg


3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System






6f4033f.jpg


3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System


I hope help you with this, remember rated this help. Good luck.

Sep 01, 2009 | 1999 Chevrolet Lumina

1 Answer

What is the firing order and spark plug connection?


4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is
  • 1-4-2-5-3-6
4.0L SOHV Firing Order Firing order for the 4.0 liter SOHV V6 is
  • 1-4-2-5-3-6
5.0L Firing Order Firing order for the 5.0 liter V8 is
  • 1-3-7-2-6-5-4-8
How to Find the Cylinder Order V6 When standing in the front of the vehicle the cylinders are numbered 1-3 up the passenger's side and 4-6 up the driver's side. How to Find the Cylinder Order V8 When standing in the front of the vehicle the cylinders are numbered 1-4 up the passenger's side and 5-8 up the driver's side.

Jul 30, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...