Question about 2005 Hyundai Tucson

Open Question

Soft clutch pedal on hyundai tucson - 2005 Hyundai Tucson

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jmassengill
  • 345 Answers

SOURCE: clutch pedal is very heavy to push down

If the clutch in your car is hydralic there is no way to adjust that type of clutch. That you describe the clutch as being hard to push and that you have to have the clutch "right down on the floor to engage a gear" is an indication that the clutch is worn and needs to be replaced. If the clutch in your car is pushed by a cable, the cable might be adjustable and if that is the case you might get a few more months of use from the car, but the fix is still the same, you will need to get a new clutch put in your car.

Posted on Nov 26, 2008

Ad
jmassengill
  • 345 Answers

SOURCE: Hyundai tucson clutch

Thank you for the request. Since the car only has 24,000 miles on it, I would take it back to the dealer. It does sound like that your clutch needs an adjustment of some type. Since I do not own a Hyundai I have no idea what the actual problem might be. I just did some research and found out that the clutch in your car is hydrolic (meaning that it uses a master and slave cylinder with hydrolic fluid to push the clutch arm when you push the clutch pedal with your foot). Trying to work on this type of clutch system can sometimes be a very hard to do. With the small amount of miles your car has on it, I would get the dealer involved in solving this problem. It could be something as simple as bleeding air from the hydrolic system of the clutch or it might be replacement of either the master cylinder, the slave cylinder and/or the fluid line that goes in between those two cylinders.

Much good luck in fixing this problem.


Posted on Nov 27, 2008

  • 566 Answers

SOURCE: Clutch pedal low near floor, can the clutch be adjusted?

hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Posted on Feb 02, 2009

martin538
  • 117 Answers

SOURCE: Hyundai Tucson

The transmission filter is inside the transmission. You have to drain out the oil and remove the transmission pan and gasket. The filter is made of metal guaze and is screwed/bolted to the underneath of the valve body.

Posted on Apr 09, 2009

  • 126 Answers

SOURCE: Where is the clutch master cylinder reservoir in a

It should be mounted close to the brake master cylinder. It contains brake fluid as well. It should be the same color as the brake master cylinder with a black lid. If you can't find it still, follow the fluid hose from the clutch master cylinder to the reseviour.

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The taillights on my Hyundai 2005 Tucson won't go out when I turn offthe ignition


be looking at the brake pedal switch and also control module tho I think that gets tested at the dewaler..

Dec 15, 2013 | 2006 Hyundai Tucson

1 Answer

My 2006 hyundai tucson manual transmission won't start


check the clutch system for air and bleed out. check fluid level in reservoir. Some cars need an operating clutch and in neutral before the circuit is complete to allow the engine to start. So you will need pressure in the clutch system (Foot on the clutch pedal) and the selector in neutral to start..

Aug 24, 2013 | 2006 Hyundai Tucson

1 Answer

Clutch problem. please help??


please go to www. automecanico.com and translate the website with your browser this amazing site and fix it.

God bless you

Jul 08, 2013 | Cars & Trucks

1 Answer

Theres a problem changing gears, its a soft very low biting clutch peddle, unable to change down from high ratio gears to low ratio gears, having to knock into nuetral pump the clutch to select gears...


This sounds like you may have a leak in the hydrulics of the clutch, the clutch slave is not disengaging the clutch all the way, this is the reason for the low bite pedal and hard to get gears, the most common problem is the fluid is low due to a leaking slave cylinder, i would look around the clutch components for a leak, hope this helps.

Oct 27, 2010 | 2007 Hyundai Tucson Limited

1 Answer

Squeak on clutch pedal


fitted as standard.....spray with silicon.

Aug 04, 2010 | 2005 Hyundai Tucson

1 Answer

Car has done only 3600 miles but clutch seems to slip when trying to pull hard. Hyundai Tucson 2 litre crdi


check your clutch pedal for free play it should be 3/4" it might be adjusted up to much, you might have to adjust it off a little....hope this helps....cheers

Jul 06, 2010 | 2005 Hyundai Tucson

1 Answer

Hard to get my tucson in gear


Check you have no air in the clutch fluid.Bleed the system.If that does not cure the problem then if you have good pressure at the pedal you pressure plate is faulty.Then the only solution is to replace the clutch.

Dec 29, 2009 | 2004 Hyundai Tucson

1 Answer

Bleeding the slave cylinder


Hi

Best to get the help of a friend to pump the clutch pedal for you.

Take care with the brake fluid, as it removes paintwork !

Top up your clutch fluid reservoir, connect a bleeding tube to the nipple on your slave cylinder, and put the other end of tube in a container.

Get your friend to pump pedal 3 times, and then hold to the floor.

Open the nipple for 5 seconds or so, then close.

Repeat this about 6 to 8 times topping up the fluid as you go.

You should then find, that the air is out of your system, and your pedal is back to normal !

Good luck !

A FixYa rating would be nice.... Thank you ! John.



Feb 01, 2009 | 2005 Hyundai Tucson

1 Answer

Hyundai tucson clutch


Thank you for the request. Since the car only has 24,000 miles on it, I would take it back to the dealer. It does sound like that your clutch needs an adjustment of some type. Since I do not own a Hyundai I have no idea what the actual problem might be. I just did some research and found out that the clutch in your car is hydrolic (meaning that it uses a master and slave cylinder with hydrolic fluid to push the clutch arm when you push the clutch pedal with your foot). Trying to work on this type of clutch system can sometimes be a very hard to do. With the small amount of miles your car has on it, I would get the dealer involved in solving this problem. It could be something as simple as bleeding air from the hydrolic system of the clutch or it might be replacement of either the master cylinder, the slave cylinder and/or the fluid line that goes in between those two cylinders.

Much good luck in fixing this problem.


Nov 26, 2008 | 2005 Hyundai Tucson

2 Answers

Clutch pedal is very heavy to push down


If the clutch in your car is hydralic there is no way to adjust that type of clutch. That you describe the clutch as being hard to push and that you have to have the clutch "right down on the floor to engage a gear" is an indication that the clutch is worn and needs to be replaced. If the clutch in your car is pushed by a cable, the cable might be adjustable and if that is the case you might get a few more months of use from the car, but the fix is still the same, you will need to get a new clutch put in your car.

Nov 26, 2008 | 2005 Hyundai Tucson

Not finding what you are looking for?
2005 Hyundai Tucson Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...