Question about Cars & Trucks

Open Question

What causes my e25 nissan caravan to make a hum occasionally when i start releasing the clutch.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
vostendorp
  • 347 Answers

SOURCE: I have a 1994 Nissan

No, By pushing in the clutch to stop the hum all you are stopping from turning is the transmission and ( transfur case if 4 wheel drive ) the engine is still running ..and some parts in the rear differential . I have had 4 nissan pickups and currently drive a 1995 pickup, without actually hearing the noise I would look toward the transmission, these Manual transmissions are very prone to bearing failure. This has happened to 2 of the one's I have had including the one I have now. You can also see as time goes by if the noise is quieter in fourth gear than others because this is direct drive and not as many trans bearings are involved Good Luck

Posted on Oct 22, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan D22 3.0L diesel 4x4 - clutch shudder.


The most common cause of clutch judder when releasing to pull away is oil on the plates. That can be caused by main bearing seals failing.

Apr 19, 2017 | Nissan Cars & Trucks

1 Answer

Where can i find a pump injector spare part of isuzu zd30 small in nairobi


no year state
zd30 is that not Nissan?
what car, is a zd30
wow country, stated, like 3rd time in 1,000,000 post,
you are savvy poster...
this is usa forum and our stores down sell zd30 parts
you need to shop in Nairobi. (or near)
my guess, is go to any Nissan dealer?
Diesel engine.
my guess is your car is.... right (its a wiki page)

  • Patrol - Chassis Code Y61
  • Caravan - Chassis Code E25 and VWE25
  • Urvan - Chassis Code E25
  • Homy - Chassis Code E25
  • Elgrand - Chassis Code E50, E51
  • Terrano - Chassis Code R50
  • Terrano - Chassis Code R20 (Europe only)
  • Atleon

Feb 24, 2016 | Isuzu Cars & Trucks

1 Answer

2003 dodge caravan will not start. Makes a clicking noise, and dash shuts off, then makes a humming sound.


im going to say an almost dead battery .the hum you hear might be the fuel pump.you never heard it before because the van normaly starts .so boost your van if it starts you may have to replace the altenator the guages, no worries many cars do that .thats a code needing erased and if you disconnect the battery that may go away.

Nov 22, 2013 | Dodge Caravan Cars & Trucks

1 Answer

98 accent clutch noise


That may be the clutch release bearing-a part of the clutch assembly inside the bell housing. If that is what is humming, it will be okay for awhile-maybe a few months. Eventually the noise will get louder and become a screeching, drive-you-crazy noise ! Then it will be time to replace it-a small donut-looking device with a sealed bearing inside it. Apparently the bearing is starting to fail. Have a mechanic listen to it to verify if it is the release bearing.

Feb 11, 2013 | 2001 Hyundai Accent

1 Answer

I have a 1994 Nissan pickup. v6 manual trans. I get a loud hum as I drive. But when I press the clutch in, the hum stops. release clutch and hum starts. Could this be the Clutch fan?


No, By pushing in the clutch to stop the hum all you are stopping from turning is the transmission and ( transfur case if 4 wheel drive ) the engine is still running ..and some parts in the rear differential . I have had 4 nissan pickups and currently drive a 1995 pickup, without actually hearing the noise I would look toward the transmission, these Manual transmissions are very prone to bearing failure. This has happened to 2 of the one's I have had including the one I have now. You can also see as time goes by if the noise is quieter in fourth gear than others because this is direct drive and not as many trans bearings are involved Good Luck

Oct 22, 2010 | 1994 Nissan Pickup

1 Answer

94 nissan sentra LE, recently replaced clutch cable and now there is way too much freeplay (about 4 inches or so) and it is occasionally hard to engage the gears, especially first gear. It even...


ensure the proper tension on the clutch cable may need a new clutch i would invest in a clutch kit price averages 150-250 dollars inlcudes pressure plate if you do it yourself

Nov 03, 2009 | 1994 Nissan Sentra 4-Door

1 Answer

2002 fair lady nissan, installed a new clutch, now the car won't start. What's the problem?? help


the clutch is not disengaging to release the clutch into neutral to allow the car to start. or the release bearing is bad or installed wrong. take it back to them and let them fix it. I know you probably paid a pretty penny to do this.

Sep 04, 2009 | 2002 Nissan Maxima

2 Answers

Front End Noise in 2005 Nissan, Maxima


it would not hurt to check rear tire wear due to misalignment
cupped tires will cause a faulty bearing type noise or humming.

Jun 15, 2008 | 2005 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...