Question about 2005 Volvo S80

1 Answer

Reduced engine power system error message

The engine works but the accelerator will not move the car

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 3,103 Answers

Shut the car off and restart.. see if it goes out.. if not take to parts store or garage.. get the error code erased or see what it is..

Posted on Dec 26, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: Message ' Reduced engine performance'

sound like transmission slipping .fuel filter clogged.turbo stop woking.dirty fuel injectors.

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 Buick lacrosse reduce power light came on today--what does that mean


Reduced Engine Power
Refer to Throttle Actuator Control (TAC) System Description in Engine Controls - 3.6L or Throttle Actuator Control (TAC) System Description in Engine Controls - 3.8L
TAC System Default Actions/Reduce Power Modes
There are 2 reduce power modes that the engine control module (ECM) can default to if an error is detected in the throttle actuator control (TAC) system. If an accelerator pedal position (APP) sensor 1 or APP sensor 2 circuit fault, throttle position (TP) sensor 2 circuit fault, or if a TP sensor 1 circuit fault is detected with some APP angle, the ECM goes into one of the 2 reduce power modes. In this mode, the engine torque is limited so that the vehicle cannot reach speeds of more than 100 km/h (60 mph). The ECM remains in this reduce power mode during the entire ignition cycle even if the fault is corrected.
If there is a condition with the throttle actuator control circuits, throttle actuator command vs actual position fault, return spring check fault, or a TP sensor 1 circuit fault, the ECM goes into the other reduce engine power mode. In this mode, the engine speed is limited to 2,500 RPM and the 3-6 fuel injectors are randomly turned OFF. At this time the Reduced Power indicator is commanded ON. The ECM remains in the reduce power mode during the entire ignition cycle even if the fault is corrected. Observe, if a TP sensor 1 or throttle actuator control circuit fault is present at the time the vehicle is at idle, with no accelerator pedal angle, the engine may stall.

Jun 21, 2015 | Cars & Trucks

2 Answers

Starts and idles, no accelerator response.


Your Denali has Throttle Actuator Control (TAC) System - Electronic throttle control ! Are there any messages on the driver information center ? Reduced engine power ?
Reduced Engine Power Mode When the PCM detects a condition with the TAC system the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The control module will continue to use the accelerator pedal for throttle control; however, the vehicle acceleration is limited.


?€¢
Limited throttle mode--The control module will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.


?€¢
Throttle default mode--The control module will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.


?€¢
Forced idle mode--The control module will perform the following actions:


-
Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off.


-
Ignore accelerator pedal input.


?€¢
Engine shutdown mode--The control module will disable fuel and de-energize the throttle actuator.


You need to have it checked for DTC'S - diagnostic trouble codes , probably a accelerator pedal position (APP) sensor or TPS - throttle position sensor !

Jun 01, 2015 | 2003 GMC Yukon Denali

2 Answers

On my 2010 Silverado the message center says engine power reduced, service stabilitrack and service traction control system. What would cause these messages. It started after sitting for a few days


The fault codes have nothing to do with it sitting for a few days. There are sensors that work with your ABS brakes and TCS to help your car maintain control when corning briskly under load. You probably have a bad sensor on one of the wheels. Recommend you get the Haynes manual to see exactly how to test and replace them. A multimeter will help too.

Apr 04, 2015 | 2010 Chevrolet Silverado

4 Answers

I have an 06 cobalt and recently my car started to suddenly lose power while driving. It says reduce engine power when this happens. If I turn the car off for a minute it'll go away.


This has nothing to do with the Catalytic converter ! Plugged catalytic converters don't go away after shutting off the vehicle !
This reduced engine power has to do with the
Throttle Actuator Control (TAC) System
Reduced Engine Power Mode When the ECM detects a condition with the TAC system, the ECM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The ECM will continue to use the accelerator pedal for throttle control; however, the vehicle acceleration is limited.


?€¢
Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.


?€¢
Throttle default mode--The ECM will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.


?€¢
Forced idle mode--The ECM will perform the following actions:


-
Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned off.


-
Ignore the accelerator pedal input.


?€¢
Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.

Mar 29, 2015 | 2006 Chevrolet Cobalt

3 Answers

I just had the transmission in my 2004 trailblazer


There is a harness in the engine compartment that has grounded out or shorted. The message 'reduced power' will flash across your driver information display on your gauge cluster. This is somewhat of a common problem for full size Gm trucks (silverado, tahoe, suburban, etc .) and trailblazer/envoy vehicles.

Sep 26, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

What causes the "Reduced Engine Power", "Service Stability Control" and "Traction Control" warning lights to come on?


the "Reduced Engine Power", problem causes the PCM to disable "Service Stability Control" and "Traction Control" turning on the warning lights to come on for those systems . The reduced engine power is because of a problem with the electronic throttle control system or as GM calls it TAC system . Reduced Engine Power Mode
When the PCM detects a condition with the TAC system, the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
• Acceleration limiting--The PCM will continue to use the accelerator pedal for throttle control, however, the vehicle acceleration is limited.
• Limited throttle mode--The PCM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
• Throttle default mode--The PCM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
• Forced idle mode--The PCM will perform the following actions:
- Limit engine speed to idle by positioning the TP, or by controlling the fuel and spark if the throttle is turned OFF.
- Ignore the accelerator pedal input.
• Engine shutdown mode--The PCM will disable fuel and de-energize the throttle actuator.
© 2017 General Motors Corporation. All rights reserved.



Drive by Wire training Your best bet , take it to a GM dealer

Mar 04, 2017 | 2005 Pontiac Grand Prix GT

1 Answer

Message ' Reduced engine performance'


sound like transmission slipping .fuel filter clogged.turbo stop woking.dirty fuel injectors.

Apr 16, 2009 | 2004 Volvo S60

2 Answers

Check Engine Light & Dashboard Reads Reduced Engine Power


The reduced engine power happens because there is a problem with the electronic throttle control . Some people call it drive by wire ! The gas pedal has sensors inside , position sensors , connected electrical to the PCM - engine computer , the throttle body on the engine has a DC electric motor an also has position sensors . These are also connected to the PCM electrical . The PCM reads the position sensors which indicate how much your pressing on the gas pedal . then hopefully it opens the throttle the same amout .

The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and eliminates the need for mechanical cable. The TAC system performs the following functions:
• Accelerator pedal position sensing
• Throttle positioning to meet driver and engine demands
• Throttle position sensing
• Internal diagnostics
• Cruise control functions
• Manage TAC electrical power consumption
The TAC system includes the following components:
• The accelerator pedal position (APP) sensors
• The throttle body assembly
• The engine control module (ECM)

Reduced Engine Power Mode
When the ECM detects a condition with the TAC system, the ECM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
• Acceleration limiting--The ECM will continue to use the accelerator pedal for throttle control, however, the vehicle acceleration is limited.
• Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
• Throttle default mode--The ECM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
• Forced idle mode--The ECM will perform the following actions:
- Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned OFF
- Ignore the accelerator pedal input
• Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.

GM Electronic Throttle Body Circuit Descriptions And Testing Tips

Tons of videos on youtube for these systems , there can be a variety problems , from wiring , worn out sensors , the DC motor , computer etc....

Jun 20, 2017 | 2007 Chevrolet Uplander

Not finding what you are looking for?
2005 Volvo S80 Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...