Question about 1995 Jeep Grand Cherokee

1 Answer

Rear defogger stopped working

Cannot locate fuse or relay

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Good post , year and model
ok
the ZJ, and you need a real FSM, well here it is. look it up , its all there.

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Posted on Jan 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse box on the 2011 Chevy Malibu is the fuse for the rear defrost


Fuse box rear , fuse #23 30 amp ! Do you know where this is located ? There is also a relay for the Rear window defogger , located in the same rear fuse box .
Fuse Block - Rear
Left side of the luggage compartment, behind the left rear wheel well . But you really need to know how it works , you can check fuse an relay .
Rear Window Defogger Operation
Battery positive voltage is supplied through the BATT 1 fuse in the underhood fuse block to the rear defog relay switched input. When the rear defog switch button is pressed, the body control module (BCM) energizes the rear defog relay by providing a B+ to the control circuit of the rear defog relay. This allows battery positive voltage from the relay switched input through the switch contacts and out the relay switched output to the rear window defogger grid. The HVAC control module houses the rear defog switch and also illuminates the rear defog indicator on the switch button, upon this request. Ground for the rear window defogger grid is provided by G301 for the Sedan or G302 For the Extended Sedan.

Nov 23, 2016 | 2011 Chevrolet Malibu

3 Answers

How come on my 2005 pontiac aztek if i take out the rear defroster fuse (#21) the light still lights up on my dash and the relay still clicks?? Help why did this rear defroster stop working?!?


I found this. Your heated mirror also works off that relay. You can do ohms test on the grid, if the grid is open, no continuity. The auto store should sell a product to paint over the open spot to restore continuity, if you can find the open spot.
Not trying to cause trouble, just killing time. Have a good day.
come-2005-pontiac-aztek-out-rear-ed5fvbjuyfmssjamkecfw2ck-4-0.jpg

Oct 24, 2016 | Pontiac Cars & Trucks

1 Answer

My rear defroster won't work I have a 2000 Buick Park Avenue


Could be a bad relay !
The rear defogger circuit is protected by a 40A fuse. Voltage is supplied through the fuse to the rear defogger relay. When you press the rear defogger switch, the heater and A/C programmer sends a class 2 message to the body control module (BCM), to ground the rear defogger relay coil output circuit. This in turn closes the relay contacts allowing current to the rear window grid.
Do you know what a class 2 message is ? What a BCM is ?
HTD BK relay in rear fuse box ,location In the center right rear of the passenger compartment, under the rear seat cushion
Watch this video on testing from relay base ( where it plug's into )
Do
VEHICLE RELAYS Testing from the relay base

Oct 05, 2016 | 2000 Buick Park Avenue

1 Answer

Where is junction box 1 in a 1995 Toyota Camry? It is supposed to be under the dash.


rear window defogger ? it is fused in your fuse box ! and has a relay to activate the rear fogger ...right ?

Oct 06, 2014 | 1995 Toyota Camry

1 Answer

I have a 1990 Ford Taurus and my blinkers don't


blinkers sounds like the flasher unit is not working. It's located under dash. Also check for burnt out bulbs.
Rear defrost, or rear defogger?: Your defogger for the rear window would run off a relay, probably located in the fuse panel of your car. Often, the connections at the rear window get broke or disconnected.
Front defrost: does your heater blower work?

Oct 28, 2011 | 1990 Ford Taurus

1 Answer

My 2004 6cfl. Trailblazer rear window defroster is not working. The wires appear to be making a good contact. The outside mirrors defrost ok using the same switch as the test window defroster. Is there...


There is a module that controls the rear window defogger grid . LGM/ EGM Liftgate or endgate module .Receive's message on class 2 serial data network from the HVAC control module to turn it on when button pressed . Fuse # 3 30 amp located in the rear fuse box . Do you know where the rear fuse box is ?
Rear Window Defogger Description and Operation
Rear Window Defogger System Components
The rear window defogger system consist of the following components:
• HVAC control module
• Liftgate module (LGM)/endgate module (EGM)
• Rear window defogger grid
Rear Window Defogger Operation (With LGM)
Battery positive voltage is supplied through the LGM 2 fuse to the LGM for the rear window defogger system. When the rear window defogger switch is depressed, the HVAC control module illuminates the rear window defogger indicator, and sends a class 2 message to the LGM to enable the rear window defogger. The LGM enables the rear window defogger by allowing battery positive voltage to the rear window defogger.
When the rear window defogger switch is pressed for the first time, the defogger cycle lasts 10 minutes. Further operation results in 10 minute defogger cycles.
Rear Window Defogger Operation (With EGM)
Battery positive voltage is supplied through the EGM 2 fuse to the EGM for the rear window defogger system. When the rear window defogger switch is depressed, the HVAC control module illuminates the rear window defogger indicator, and sends a class 2 message to the EGM to enable the rear window defogger. The EGM enables the rear window defogger by allowing battery positive voltage to the rear window defogger.
The following conditions must be met for rear window defogger to operate:
• The end gate glass position is not below the index position.
• The window express down movement is not requested.
• The window down movement is not requested.
If the end-gate glass is not fully closed, the DIC displays "Tailgate Glass Down" when the rear defogger operation is attempted.
When the rear window defogger switch is pressed for the first time, the defogger cycle lasts 10 minutes. Further operation results in 10 minute defogger cycles.

Fuse Block - Rear
Beneath the left rear seat

Jul 13, 2017 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

1998 buick park ave. rear window defroster not working. fuse is good, has anyone replaced the black box located next to rear window where element plugs into along with the antenna. element on window is not...


Rear Defogger Inoperative, But Heated Mirrors Operate Correctly
1. Connect scan tool. Turn ignition switch to RUN position. Turn rear defogger on. Using scan tool, display BCM
outputs. If rear defogger is being requested on, go to next step. If rear defogger is not being requested on, go to
step 10).
2. Ensure ignition switch is in RUN position. Remove rear defogger relay from rear junction block, located on center
right rear of passenger compartment, under rear seat. Connect test light between ground and defogger relay
harness connector terminal F3 (Brown wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 11).
3. Connect test light between ground and defogger relay harness connector terminal A2 (Red wire). If test light
illuminates, go to next step. If test light does not illuminate, go to step 12).
4. Connect test light between defogger relay harness connector terminals A2 (Red wire) and B3 (Purple wire). If test
light illuminates, go to step 13). If light does not illuminate, go to next step.
5. Disconnect rear defogger positive and negative feed bus connectors. Connect a jumper wire between defogger
relay harness connector terminals F3 (Brown wire) and A4 (White wire). Connect test light between ground and
positive feed bus connector terminal "A" (Black wire). If test light illuminates, go to next step. If test light does not
illuminate, go to step 8).
6. Connect test light between positive feed bus connector terminal "A" (Black wire) and negative feed bus connector
terminal "B" (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 9).
7. Repair open in Black wire between rear defogger and ground. Recheck system operation.
8. Repair open in Purple wire between rear junction block and heated backlight antenna module. Recheck system
operation.
9. Check for proper terminal contact at rear defogger connectors. Repair as necessary. Recheck system operation.
10. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.
11. Repair open in Brown wire between rear junction block and instrument panel junction block. Recheck system
operation.
12. Repair open in Red wire between rear junction block and underhood junction block (located in right front corner of
engine compartment, between battery and strut tower). Recheck system operation.
13. Connect test light between defogger relay harness connector terminals F3 (Brown wire) and A4 (White wire). If
test light illuminates, go to next step. If test light does not illuminate, go to step 16).
14. Reinstall defogger relay. Disconnect BCM 32-pin Pink connector C2. BCM is located behind right side of instrument
panel, near rear of glove box. Using DVOM, check voltage between ground and BCM harness connector C2
terminal A3 (White wire). If any voltage is present, go to next step. If no voltage is present, go to step 17).
15. Repair open or short to ground in White wire between rear junction block and BCM. Recheck system operation.
16. Check for poor connection at defogger relay terminals. If connections are okay, replace defogger relay. Recheck
system operation.
17. Check for proper terminal contact at BCM. If terminal contact is okay, replace BCM. Recheck system operation.

Feb 25, 2010 | 1998 Buick Park Avenue

1 Answer

It doesn't blow off heat was working fine yesterday and just suddenly stopped working


Check the Front Blower Motor Relay located in the IPM Relay and Fuse Box. It's location should be identified on the back side of the cover. There are other exact Relays (like the Spare Relay or the adjacent: Rear Blower Motor Relay or Defogger Relay) that you can switch out and check operations. If the Front works now but not the Rear, it is the Relay and should be replaced.

Jan 02, 2010 | 2003 Dodge Grand Caravan AWD

1 Answer

Back window defogger is not working could it just be a fuse if so where is the fuse located


There is a fuse and a relay,look under the hood in the fuse/relay box.
Some of the relays in the box will be the same part # as the rear window defogger relay.....switch it with another to check it.

Nov 08, 2009 | 2006 Chevrolet Impala

1 Answer

2001 Sienna rear window defogger doesn't work


There are 3 fuses that control the rear defogger, and 1 relay

The fuses are: 10 amp HEATER, 10 amp MIRROR-HEATER; under the dash
The 30 amp DEF fuse is in the fuse box under the hood
The relay is the DEFOGGER relay, which is on the back side of the fuse panel under the dash

Also, check for a loose wire on the defroster grid (on the back glass), this is the most common problem.


Oct 19, 2008 | 2001 Toyota Sienna

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...