Question about Chevrolet Silverado 1500
Does a 2013 SILVERADO have a post crash fuel pump shut off I read somewhere it was located inside the air bag module
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1999 Silverado
no..but you have a fuel pump/ fuel pump relay/ and fuses....also on firewall passenger side of center is a fuel pump jumper wire to excite the fuel pump and test it...good luck
Posted on Nov 10, 2008
SOURCE: FUEL PUMP FOR CHEVY SILVERADO
fuel filter? how about power to the fuel pump,loose ground wire to chasis? wiring harness? terminals clean at point of connection?did you check the fuel pump relay? Relay is located in electrical center under the hood on the driver side.relay and fuse legend will be on bottom side of cover, you sould be able to switch with another relay that you know works, ie: switch horn relay with fuel pump relay, honk horn to insure both relays are working when either relay is inserted into horn slot. Do you by chance have the electrical schematic drawing for the fuel pump?
Posted on Feb 19, 2009
Should be on the passenger side kickplate below the glovebox and to the right. You may have to remove the plastic panel to access it or look for a small hole in it and feel around for the button
Posted on Apr 23, 2009
First of all you need to get this problem fixed ASAP. While the airbag light is illuminated, your SDM (Sensing and Diagnostic Module aka: the brain of your airbag system) shuts of power to the airbags. In which, if you are in an accident your airbags will not deploy while this light is illuminated. You need to take your vehicle to a GM dealership. A Tech 2 scantool is needed to retrieve the code from the SDM. Hopefully it won't be a costly repair, but is something that defineatly needs to be corrected soon. Good luck and hope all works well.
Posted on Jul 04, 2009
Testimonial: "very fast and helpful, thanks"
take the six bed bolt loose and then take three buddies slide the bed back put in the new pump slide it back n place and put the bed bolts back in. if u drop the tank u can easily break the hard plastis lines that go to the fuel tank. u only have to take the fill lines and taillight wires loose this way its alot quicker, and easier.
Posted on Aug 07, 2009
Tips for a great answer:
May 09, 2017 | Cars & Trucks
Jan 27, 2016 | 2013 Chevrolet Silverado 1500
Jan 25, 2016 | GMC Cars & Trucks
Jan 05, 2016 | 2008 Chevrolet Silverado 2500HD
Jan 01, 2016 | 2002 GMC Sierra 1500
Oct 31, 2014 | 2003 Chevrolet Silverado 1500
Jul 15, 2012 | Chevrolet Cars & Trucks
Jul 19, 2009 | 2001 Chevrolet Silverado 1500
90 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: