Question about 2002 Nissan Sentra

1 Answer

Broken wheel stud

One of the wheel studs on the rear side broke off while I was changing tires, I need tips on how to replace the broken wheel stud with a new one, can you help?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

1. get new studs and nuts
2.remove wheel
3. remove caliper at bracket to spindle connection(2 18mm bolts?)you may need to remove caliper from bracket,but not always nessacery. Or remove drum,then to #5
4.remove rotor,will need a hammer, tap inbetween studs dont wreck good studs and see if new studs can be installed without removing parking brake shoes. If there is no clearance to get new stud in you will need to remove shoes.
5.Pound out old studs place new stud in hole use a washer on outside then put a nut on and tighten to install stud, A air gun or some type of impact tool will be very helpful. Check to see that stud has enough threds to pull stud all the way thru ,add more washers if nessecary dont let the nut run out of threds it will **** to get back off and wreck new stud.
6. if you dont have air gun or feel comfertable removing brakes bring it to a reputable garage, shouldnt cost more than $70+ parts to get all new studs put in on one wheel.

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 dodge caravan with rear draum brakes. Broken wheel stud on right rear wheel. Got the drum off, got the broken stud off. but i cant get the new stud in. not enough space to get the new stud in. Is...


Make sure all tires are chalked,put vehicle in neutral,turn drum till it has a clear spot to knock stud out,use hammer and wooden block,don't use metal punch,can cause burr on end of stud and not want to come out of hole.Both tires on back may need lifted in air to turn.

Jul 05, 2017 | 2006 Dodge Grand Caravan

2 Answers

2 lug-nut studs sheared off rear tire. How much to replace them? and why did it happen?


GO TO TIRE CENTER OR GARAGE THAT SALE TIRES AND DO BRAKE WORK.THEY WILL HAVE TOOLS TO REMOVE BROKEN STUD AND PRESS IN NEW TIRE STUDS.REASON TIRES STUDS BROKE TOO MUCH TORQUE WAS APPLIED TO BRAKE STUDS CAUSING THEM TO BREAK.COST TO FIX ABOUT $60.00

May 25, 2011 | 2008 Ford Explorer Sport Trac

1 Answer

Need to remove rear axle to replace tire studs


You don't need to remove the axle. Remove the rotor or drum. pound out the broken studs with a hammer. Install the new stud into the hole. Use a wheel nut and some washers to pull the new stud into place. They also make a stud installer tool which makes it a little easier.

Dec 02, 2010 | Ford Expedition Cars & Trucks

3 Answers

How do i get the rear hub off to replace the wheel studs


On some vehicles you may need to slightly pry the hub off. This can be done with a screw driver or the vehicle may have a lug wrench that came with the vehicle. If you are trying to replace the lug studs, then you will have to take the wheel off. Tap the broken stud out and replace it with the new one.

Nov 27, 2010 | Ford F-250 Cars & Trucks

2 Answers

Broken rear wheel stud how do i repair it


The stud has to be hammered out if you don't have the tools to do this then I suggest you take it to a tire shop they don't charge much. depending if it's front wheel or rear wheel drive will determine what has to be done. If it's a rear axle they will remove the tire and drum and knock out the old one with a hammer and punch and replace it with a new one same size, they can hammer it back in our use washers to pull it into place this is the same on the front wheel. You will need to measure the bolt to get the right length and width. tire shop will have the stud you need.

Sep 11, 2009 | 2002 Dodge Caravan

1 Answer

How to replace lug studs on 2002 chrysler town


I'll try to help you. If you are having trouble with 3 out of 5 studs on one wheel you may want to go to an autoparts store or Salvage yard to look at the whole hub. Usually a press is used to remove the bolts so you would be taking off the hub anyway. When you pay for 3 bolts and labor you may be better off in a Salvage yard or parts place for a different hub. The rear hub on front wheel drive cars is like a trailer axle. Much simpler to remove mounting bolts and press in new bolt. But if rear has differential(rear wheel drive) it has an axle shaft. Would be easier to grind and drill out broken stud on car. You can draw new bolt into place by placing bolt through a socket and use the wheel nut to draw the bolt into the hub.

Jul 08, 2009 | 2009 Chrysler Town and Country

2 Answers

2003 hyundai elantra gls front wheel stud broke


grab a large punch and hammer and knock out the old broken one. Push the new one in and re tighten. This will pull it into place and because it has splines it should not spin while doing so.

Apr 05, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Wheel Stud


If you remove the wheel drum you can knock out the broken stud. It is pressed into the hub. Take the hub to aan auto parts store ( so you get the same size stud) and buy a new stud. put the stud into the hole in the hub. When you remount you remount the tire and tighten the lug nuts that will pull the new stud up tight in the hub.


Hope this helps

Good luck Loringh

Oct 18, 2008 | 1996 Kia Sephia

2 Answers

Broken lug stud on rear wheel.


It appears from the excellent picture that the stud has to be spun to line up the half moons at the rear of the stud.Use two thin nuts locked together so you can spin the remaining stud to line up with reliefs in back of the retainer.

Oct 18, 2008 | 2004 Buick LeSabre

Not finding what you are looking for?
2002 Nissan Sentra Logo

926 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...