Question about 2008 Hyundai Getz 1.6

1 Answer

Sounds like it is trying to start engine even though the engine is already on.It does this when I am driving sometimes as well

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 331 Answers

I would start by inspecting the wiring to the starter, It could be that the signal wire (the wire that activates the starter solenoid) is touching a 12volt power wire. Check the starter relay. It is possible that the relay is old, weak, and is time to replace. Also the ignition switch, check it for proper operation. Pay attention to the way it releases. Try to confirm if it releases properly or if it feels like it is binding or seizing. I hope this helps. Please let me know how this goes and if you need to take your search further. The more details that you can provide the better. Good luck.

Posted on Mar 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 sentra will crank, but has trouble firing unless im pressing the gas.


Sounds like the fuel pump is failing, have the pressure checked at start up.

Apr 04, 2017 | 1994 Nissan Sentra 4-Door

1 Answer

2000 Ford Contour SVT engine idles high (revs) when driving


It sounds like a faulty idle air control valve. The computer uses the valve to control idle speed by regulating the amount of air entering the throttle body. Its possible the motor inside the valve is weak, or the valve is gummed up. I would unplug the valve when base idle is near normal and drive it for a day or two. If the valve is the problem the idle speed should stay in one place. And it should set a trouble code for the valve being disconnected.

Jul 04, 2013 | Cars & Trucks

1 Answer

Car won't start


Did you try starting in neutral? Some vehicles have electronic transmission lockouts that will go bad and prevent ignition cycling even when it is not in gear.

Dec 14, 2012 | Cars & Trucks

1 Answer

Can't shift into gear when the engine is on


Sounds like the clutch isn't disengaging fully. Check the master and slave cylinders and the hose for leaks, and make sure you have proper fluid level in the reservoir. If there are no leaks, then try bleeding the system.

Oct 16, 2012 | 1998 Ford Contour

1 Answer

98 acura integra dies while driving


might be a timing issue. check if your spark plug wires are seated correctly also you might have a dirty fuel injectors. a good cleaning might help as long as they are not leaking.

Mar 28, 2017 | 1998 Acura Integra

1 Answer

2000 GMC Sonoma will not start after standing serveral hours


Check the fuel pressure at the shredder valve, you should have 62 to 65 PSI when the fuel system is primed. (engine not running) With the engine started and running the pressure should drop by 5 PSI, anything less then 62 PSI in your fuel system when trying to start the engine will cause a no start. Note; that try to start a the engine by pouring gas through the throttle body may cause an internal fire in the intake ports and will cause the fuel injectors to melt creating a more expensive problem. As for the fuel pump in the gas tank, it''s held on by and snap ring which you can remove with a simple screw driver. Good luck and keep me posted, and don't for get to replace the wire harness from the frame to the gas tank. It's a $12.00 investment that's worth more then it's cost.

Nov 15, 2009 | 2000 GMC Sonoma Extended Cab

1 Answer

My sebring sometimes won't start even though it


Sounds like a faulty fuel pump. Next time it doesn't start have someone listen with their head right above the gas tank. When you turn the key to "on" pos, without trying to turn it over, they should be able to hear the pump spin.

Aug 10, 2009 | 2000 Chrysler Sebring

4 Answers

Crank no start


SOUNDS LIKE THE CRANK SENSOR POSS. AS I HAVE ONE HERE THAT I JUST DIAGNOSED FOR THE SAME THING WITH A SCAN TOOL WHEN WE FINALLY GOT IT NOT TO START. I'LL FOLLOW UP AFTER SENSOR INSTALL

Aug 11, 2008 | 1995 Lincoln Town Car

2 Answers

Intermittent not starting


sounds like engine management chip fault,may be worth getting checked at dealers as will show on diagnostic machines hope this helps andy

Jun 22, 2008 | 2003 BMW 5 Series

Not finding what you are looking for?
2008 Hyundai Getz 1.6 Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...