Question about 1995 Nissan Pickup

1 Answer

How do I change rear Bulbs...does the one piece pop off how do i get into it to change bulbs..

I lost the owners manual for a 1995 Nissan...how do I change the rear turning signal... does the one piece just pop off? thanks...richie

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

No you unscrew the four screws on the outside and then remove the lamp assembly then twist the bulb holder counter clockwise to remove the bulb holder from the car, next twist and remove bulb in same direction counter clockwise.

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Verona: how to change the brake light bulb in rear...


I just replaced 2 break light bulbs in less than 10 minutes on my 04 Suzuki Verona.

First lift your trunk lid and go to whichever side that needs replacement. There was a pull down attachment that gives you access to the whole assembly.

When you have access to the assembly locate the 2 top bulbs which will be for the brakes. Turn the plastic piece which holds the bulb counter-clock-wise to get to the bulb.

Pull out old bulb(you may have to twist it slightly). I bought a replacement pack which came with 3 bulbs(#1157). Then insert new bulb into socket until firm.

Then put it back into the housing and turn clockwise to lock it in.

Then repeat the same process for the next bulb and your good to go!

If you are having any kind of difficulties with it your owners manual shows you how under bulb replacement.

May 16, 2010 | 2004 Suzuki Verona

1 Answer

How do I change the brake bulbs on 99 Nissan Quest


The whole assembly will pop out with a screwdriver (carefully). Then the bulbs can be reached. Just push the whole thing back into the slots when you are done.

Feb 17, 2010 | 1999 Nissan Quest

1 Answer

How to change head lamp bulbs on a 2007 Dodge Dakota TK


Check your owner's manual. To replace headlight bulbs you open the hood and then behind the headlights there is a piece that either twists off or pops off. It will have the headlight wires running thru or under it. Pop or twist this off and you should see the back of the headlight bulb. Pull the bulb out. Slide the old bulb off the connector and being carefull not to touch the glass part of the new bulb (use a clean rag to hold it) as it will hasten the new bulb in burning out if you get grease or oil from your hand on it, stick the new bulb into the connector and repeat the process to install

Feb 11, 2010 | 2007 Dodge Dakota Cab SLT

1 Answer

How do I change the right license plate bulb. Do not see easy access from plate area in trunk. Or do I pop off piece around bulb on outside to change? 1995 Lexus ES300


this ones kind of tough for an amateur. You need to pop off most of the little black retainers holding the trunk lid liner on. then theres the emergency handle that you use to get out if your locked in the trunk. you need to pull on the far end of the handle and the outer cover will come off. you may need a small screwdriver to remove it. then pull straight down, really hard and the handle will come off. then remove the rest of the liner. the bulbs are 194a bulbs. available pretty much anywhere. reinstall in the reverse order.

Feb 02, 2010 | 1995 Lexus ES 300

3 Answers

1995 Toyota Camry tail light. no screws to


To change a bulb on this car you will need to go from the trunk. The bulbs are located behind a small plastic door.

Oct 28, 2009 | 1995 Toyota Camry

2 Answers

Remeove rear combination tail light cover 2006 Nissan XTERRA


I just changed out a tailight on my 2000 Nissan Xterra, so I assume it may be similar. You have to pop the plastic strip which runs across the back. There are pop rivits in it.

Jan 01, 2009 | 2006 Nissan Xterra

1 Answer

Replacing the rear parking light


Remove the finisher panel - its a long black plastic cover on the light housing - (pop it off) from the inner edge of the taillight, remove the screws.

Dec 01, 2008 | 2005 Nissan Murano

1 Answer

Both my rear license tag lights are out How do I change the light bulbs?


if you squeeze the plastic housing around the light they will pop out with little force from the outside. then you just change your bulb and replace

Aug 30, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...