Question about 2006 Hyundai Trajet 2.7

Open Question

G6ba camshaft timing diagram - 2006 Hyundai Trajet 2.7

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace oil pump on 2.7 tiburon

How to, who can, where to buy, who has the best part?
try a real question? please.
Hyundai Tiburon
? what YEAR? 96 to 2008
2001 to 2009 (2008 USA)
G6BA engine.
engine or trans? pump.?

the pan needs to come off for most cars.
why not state symptoms and miles on engine.
then get better answers.
most times low oil pressure (see my guess stupidly) is
caused not by the pump, ever.its caused by bad bearings.
some times a very dirty and high milleage engine (never serviced !!!)
will have a jammed pump pressure relief valve. and has low pressure.
this part is part of the pump. in many cases but not all.

the FSM book covers that, buy one.
or login to $15
or google , ill type this now.

G6BA engine
see crank cog here, and whats behiind it.

see the pump
next google hit

i could do that same thing at Hyundai dealer web site.
see all parts on the car, and not how to fix it.

why not post the symptoms, why not?>

to find free info on any engine.
you only need to know what you have.
then google for that, any car made.

May 25, 2014 | Cars & Trucks

1 Answer

4wd do not tuen on, Hyundai Tucson 2006, V6, G6BA, 4wd

Check the relay first then the fuse. If they are not bad then it might be that the switch is burned out after that it will be in the shift modulator for the 4 wheel drive. If it is the modulator then you will need a new one.

Jan 28, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

Camshaft timing diagram

varies by engine options, not stated (1000 post like this btw)
and there are more details , to do the 60k belt change.
why not say.?????????????????

Dec 27, 2013 | Toyota Camry Cars & Trucks

1 Answer

Isuzu 320 KB v6 camshaft timing diagram posted to wrong forum.

Here is a diagram, I just want to make sure we have the correct information or engine damage will occur. double check these specs. 1999 ISUZU TROOPER V-6 WITH A 3.2 OR 3.5 ENGINE.

Here are two diagrams to line up camshafts and crankshaft. hope this is helpful. good day.3_2_2012_9_19_49_pm.gif3_2_2012_9_20_21_pm.gif

Mar 02, 2012 | 1999 Isuzu Trooper

1 Answer

Timing belt diagram marks for toyota corolla 1996

On the 4A-FE engine do the following:
Align the camshaft knock pin with the knock pin groove on the pulley side with the K mark, the slide on the timing pulley.
Align the camshaft knock pin with the knock pin groove of the pulley, and slide on the pulley.

Align the camshaft knock pin with the groove on the pulley side with the K mark-4A-FE engine
Temporarily install the timing pulley bolt. Hold the hexagonal wrench head portion of the camshaft with a wrench, and then tighten the timing pulley bolt to 43 ft. lbs. (59 Nm).
Install the crankshaft pulley. Align the pulley set key with the groove of the pulley. Slide on the timing pulley, facing the flange side inwards.


Jan 09, 2012 | Toyota Corolla Cars & Trucks

2 Answers

Need for 2002 dodge stratus 2.7 timing chain diagram online

  1. Remove the timing belt.

    Crankshaft and camshaft timing marks-2.4L engine

    Timing belt tensioner-2.4L engine

    Camshaft sprocket alignment-2.4L engine

    Timing belt installation-2.4L engine

    Timing belt tension adjustment-2.4L engine

    Timing belt tension verification-2.4L engine

Dec 01, 2010 | 2002 Dodge Stratus

1 Answer

Diagram for timing marks

Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at!

Note: the correct procedure for the Camshafts using an Alignment Tool and Wrench. There is no "marks" on the Camshaft Sprockets.

Apr 04, 2010 | 1995 Mercury Grand Marquis

1 Answer

Need a timing diagram

The time setting is necessary whenever the camshaft drive system has been disturbed,meaning the relationship between any chain and sprocket has been lost.Correct timing exists when the crankshaft and intermediate shaftsprocket timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface.

Here is the timing diagram

429c331.gif Hope this helps

Sep 09, 2009 | 2000 Cadillac DeVille

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Feb 21, 2009 | 2002 Isuzu Trooper

Not finding what you are looking for?
2006 Hyundai Trajet 2.7 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides