Question about Cars & Trucks
Some have a window in the back of the motor above the transmission.. it will have numbers like 8642 and 0 visible..
Posted on Dec 25, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Likely you are talking about the harmonic balancer.
The bolt turns counter clockwise and is generally removed using an air gun. There is another way to do that too but it is a bit dangerous. Using a solid breaker bar (one without jointed end) you can brace the end against the ground with the socket installed on the crank bolt (I actually have a pipe driven into the ground outside just for doing this...I just slide the bar into the pipe and keep it form dropping by using a vise grip on the handle). Once the socket is on the bolt, crank the engine over using the starter, the engine will force the bolt to back out.
After you get the belt installed, tighten it as much as you can by hand and ask a shop to just give it a final tightening with an air gun.
If the socket slips the bar can fly up so be very careful and don't stand where it can hit you!
Posted on Feb 15, 2010
You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.
Posted on May 19, 2011
No idea offhand to be honest i would need my head under the bonnet to know what wrong .could be anything from the gauze filter in the fuel tank on the bottom of the fuel pump becoming chocked up and leaving the car allows it to drop away to a faulty pump overheating or the contacts ,maybe even a ignition module overheating ,Best advice is ask a local mechanic to have a look for you as normally these early opel corsas with the 4 cylinder engine are bullet proof they are even valve free if the timing belt snaps .
Posted on Jan 31, 2012
SOURCE: My 1996 opel corsa is losing power while driving, and sometimes it is cuts out completly. The only way to get it to go again i have to stick my foot to the floor that usually works, there does be a re
Sounds like you not getting enough fuel. Try replacing you fuel filter which sits under neath the rear near the tank. Just follow the line from the tank and you'll see it or it can be a faulty fuel pump You should get 3 bars pressure from it.
Posted on Jul 20, 2012
Not sure here as to the type as some have a bolt in the block in line with the crank and special tool is used to locate TDC ,If the timing belt broke then you have bent valves anyway so the head will have to come off .If you reply with more details then i will advise how to do it with no timing marks also is this a common rail with just a high pressure pump or is it a intermediate with injector pump but the injectors having electronic sensor on one of the injectors if that makes sense to you
Posted on Oct 19, 2012
Tips for a great answer:
Jul 11, 2017 | Opel Cars & Trucks
Jan 07, 2016 | Opel Cars & Trucks
Jun 21, 2015 | Cars & Trucks
Feb 15, 2015 | Opel Corsa Cars & Trucks
Oct 18, 2014 | 2005 Opel Corsa 1.7
Sep 23, 2014 | 2006 Opel Corsa Utility
May 11, 2014 | 1998 Mazda Pickup
44 people viewed this question
Usually answered in minutes!