Question about Cars & Trucks

1 Answer

2000 Lumina brake,dash and tail lights not working

All dash lights,tail lights and brake lights just stopped working. Replaced rear bulbs and all fuses are good.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

Be looking at relays or fuseable link wires..off the battery.

Posted on Dec 26, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wracefans24
  • 1985 Answers

SOURCE: brake lights won't work. tail lights do. I

need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.

Posted on Jan 19, 2010

  • 290 Answers

SOURCE: rear tail lights not working

If both tail lights are not working it is likely to be a fuse or bad connection under the hood or a connector at the back see if you can trace the wires to a connector and see if it is dirlty or corroded.

Posted on Mar 02, 2010

webbird69
  • 6 Answers

SOURCE: No tail lights on 1991 Chevy Silverado. fuse is good

sounds like a broken wire in the harness. look around the bumper area,sometimes along the frame. may have to peel back some tape covering. also if you have a trailer harness look closely at those.

Posted on Jun 04, 2009

  • 324 Answers

SOURCE: dash lights, tail lights, brake lights, not working 1965 mustang

Probably either a bad ground (broken wire, rust) or a bad headlight switch. The brake light circuit goes from the stop switch (Located up above the brake pedal) through the headlight switch, through the light bulbs to ground. The tail light circuit goes through the headlight switch, through the bulbs and to ground. The only things that are in common are the headlight switch (Is this the switch you replaced?) and ground.
Not much, but hope this helps.
Have a super day!
Ron

Posted on Feb 20, 2009

MrScary66613
  • 1990 Answers

SOURCE: Left rear brake light stopped working but bulb and fuses are OK.

These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for a chevorlet Lumina 2001 taillight.


Fuse boxes located under dash.under hood.in a small plastic cover on left side kick panel on drivers side.should be marked lights or tail-lts. Is all lights on rear of vehicles out or just one side or part of one side as any lights work fuse is still good.brake lights also if they work fuse good.access bulbs from trunk remove 6 screws pull cover.remove wire plug push light socket in turn back counterclockwise.

May 18, 2014 | 2001 Chevrolet Lumina

1 Answer

Dash lights switch parking tail


is switch good? try checkin wires for continuity with a meter

Dec 25, 2013 | 2000 Chevrolet Lumina

1 Answer

I have replaced both circuit boards for rear tail lamps. I have verified that all of the fuses are good. Yet, I still have no taillights or dashboard lights. I do have signal lights, brake lights and...


You only need to change the tail light fuse if it is blown. If you haven't checked it already, do that. Those stop/tail bulbs are 2 filament bulbs. One filament is for brake lights, and other filament is for the tail lights. So it is possible to have brake lights and no tails, if the filaments for the tail lights are burned out. But of course, it is unlikely that all the tail lights would be out and all the brake lights still work.

You may need a voltmeter to help solve the problem. It could be a problem in the headlight switch (a problem with the park light function), but is more likely a problem with the Lighting Control Module- or the Body Control Module-whichever your car is equipped with. GM first came out with the LCM, and a year or two later came out with the BCM. Both are mini-computers to control lighting and cabin functions. You would have to use a voltmeter and check things like power in and power out at the BCM of the park lights. You would thus need a wiring diagram to go along with the voltmeter. Those modules are located up under the dash-you can use google to see pictures of them, and maybe find locations.

Apr 06, 2017 | 2000 Chevrolet Malibu

1 Answer

2000 Acura 3.5 RL suddenly has no tail lights or tag lights. Brake, reverse and blinker all work. Checked fuses-all appear fine. Decided to replace bulbs and noticed front right marker light out so changed...


The only thing that both the brake lights and tail lights use is a ground connection. Keep in mind the warning light on the dash may be for any exterior lamp. You may need to check the sockets and grounds on all four corners of the car.

Aug 03, 2013 | 2000 Acura 3.5RL

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

I have a 2000 Dodge Durango I bought about 4 hours ago. The tail lights do not work but the brake light and turn signals do. Also the dash lights do not work. The dash lights came on when I hit the...


The odds are the one fuse is blown for the dash and the tail lights. And the wrong bulb may have been put in for the brake light. The brake light is feeding back into the tail light circuit causing the fuse to blown out.

Change out the bulbs with OEM bulbs and replace the blown fuse. That should fix the problem.

Apr 16, 2010 | 2000 Dodge Durango

3 Answers

The brake lights on my 1999 saturn sl do not work. The bar on the rear window functions. The bulbs and fuse is ok--what is the problem


does the third brake light work when braking ? the bar on the rear window? if not replace brake light switch on brake pedel

Jul 03, 2009 | 2000 Saturn SL

2 Answers

Lower brake lights on 92 camry wont work


YOU MAY NEED A LIGHT FAILURE SENSOR WHICH IS LOCATED IN THE TRUNK ON THE DRIVERS SIDE

Feb 11, 2009 | 1992 Toyota Camry V6

2 Answers

1998 chevy lumina brake lights intermittent.


This is a classic example of turn signal switch failure. On GM vehicles with a multi-function turn signal switch and combination stop/turn/tail lights (all rear lights are behind red colored lenses except for back-up lights) The brake light power is routed through the turn signal switch. This makes it possible for the right rear light to function as a stop light while the left rear turn signal flashes, and vice-versa. When the contacts fail to remain constant the brake lights, and turn signals can become intermittent. The proof that the brake light switch is functioning correctly is that the high center (cyclops) brake light functions properly. Wiring integrity is verified if you can prove that turn signals operate, but that can still be intermittent with this complaint, BUT if you use your hazard switch to turn on all the signals at once, you can verify wiring integrity. This is because the turn signal, and the brake light use the same circuit, and bulb filament in the rear lighting assembly. If any Hazard lights fail to function, check bulbs first, then retest. If all Hazrd light flash correctly and reliably, bulbs, sockets, and wiring have proven integrity, and the turn signal switch is the remaining component in the system which needs to be tested. Unfortunately, this switch requires disassembly of the steering column for service, testing or replacement. If you have never disassembled, and successfully reassembled a GM tilt steering column, I would reccommend professional assistance.

Oct 31, 2008 | 1998 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...