Question about Cars & Trucks

Open Question

Torque wrench settings for ford ikon 1.6 rocam

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 277 Answers

SOURCE: torque wrench settings for ford focus thermostat

There is a set spec, but for the DIY mechanic,,
Using a !/4 " drive, with the correct long socket, apply a FIRM effort on the wrench, but obviously not too much, as to sheer the studs. Always use a NEW gasket on all mating surfaces.
Regards,DT

Posted on Aug 28, 2009

Testimonial: "a specific torque setting would be better !!"

  • 333 Answers

SOURCE: I need to know the torque wrench settings for

The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs

Posted on Sep 18, 2009

  • 1 Answer

SOURCE: torque wrench settings

TORQUE SETTINGS FOR 3800 HOLDEN HEAD AND BEARINGS

Posted on Dec 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need the big end torque on the Rocam engine please


A cheap shop manual will have this and much more. If you are in this deep you probably need one.

Sep 05, 2016 | 2000 Ford Ka

2 Answers

Ford ikon 1.6i lx 2005 modeltorque setting of acylinder head. how to do it.its a rocam engine


You must use new head bolts, these are one time "stretch to yield" bolts
Tighten cylinder head bolts in three stages in the sequence indicated

10--4--2--6--8

7--5--1--3--9

Tighten in the following stages
STAGE 1 ------------20 Nm 14.75 lb
STAGE 2--------------40 Nm 29.51 lb
STAGE 3 Turn head of bolt 90 degrees of rotation.

Aug 11, 2016 | 2005 Ford Ikon 1.6i

1 Answer

Engine Torque settings


There are a lot of adjustable torque method, but according to your purpose to distinguish with which kind of appropriate Motor Part Store Motor Parts Wholesale

Jun 26, 2016 | Ford Cars & Trucks

1 Answer

Ford bantam rocam-big end bearing torque settings


Write your answer...please can give me torque settings for ford bantam 1.3 rowcam cylinder head.
Amos

Jul 23, 2013 | Ford Cars & Trucks

1 Answer

Need diagram of the correct route for ford rocam fan belt on aircon models


i am looking for a fen belt diagram for ford ikon 1.6 2003 recom

Nov 26, 2012 | 2006 Ford Bantam 1.3i

2 Answers

I have intermittant overheating problems with my 1.6 Ford Ikon which has a Rocam engine. I need the diagram of the cooling unit attached to the side of the engine as I think this is where the problem lies....


Ronnie this soun ds like the thermostat is not opening all the time. this is an easy fix. the part probably cost about 8-15 dollars at autozone, dont forget to get the gasket also.
1-2 dollars. The guy at the counter can show you where it goes

Jul 05, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...