Question about 1999 Ford Taurus

Open Question

2006 prius check engine code P0010 - 1999 Ford Taurus

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chrischronic
  • 235 Answers

SOURCE: Check engine light on

the last two codes you rote have somthing to do with the electronic throttle control. the gas control is no longer controlled by a gas cable but is now all controlled electrical. so this is not a self fixer. must be checked by dealer or someone that knows what thay are doing.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toyota prius code P0A41


There is an open or short in motor resolver circuit
Check your connections
also check:
Wire harness or connector
Hybrid vehicle motor
HV control ECU

Jun 19, 2014 | 2006 Toyota Prius

1 Answer

P0010 code


P0010 on a Hyundai means your camshaft positioning oil control valve solenoid is screwed up. Could be the wiring to that, as well. Check the wiring first, if any loose connectors, clean and reseat and see if code stays cleared. If not, the solenoid needs replacing. The VVT (variable valve timing) system on this engine has been troublesome, and Hyundais in general are troublesome. People only buy them because they're cheap and disposable. There are cases where a P0010 is indicated a faulty ECM...big bucks.

Mar 14, 2014 | 2004 Hyundai Elantra

1 Answer

Where is located thecam sensor on a jetta 1.8L


A P0010 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module). That consists of an oil control valve (OCV), also called a solenoid valve and other components. Basically the check engine light and associated P0010 trouble code means that the voltage in the circuit has fallen below a set limit for a specific amount of time (varies by make/model/engine).

Carefully inspect the Bank 1 VVT/VCT system circuit wiring and connectors, repair as required
With a warm engine, test the operation of the OCV, replace/repair as needed.

-----------------FGTech Galletto 2-Master EOBD2

Nov 30, 2012 | Cars & Trucks

1 Answer

Nissan frontier 2006 code p0010 and p0011


These codes must be diagnosed by a qualified technician but here are the definitions. The codes are related and the same root problem most likely.

P0010 - Intake Camshaft Position 'A' Actuator Circuit Open Bank 1
P0011 NISSAN - Intake Valve Timing Control Performance Bank 1xicon.jpghttp://engine-codes.com/p0011_nissan.htmlForum CodePossible causes- Harness or connectors
- Intake valve timing control solenoid valve circuit is open or shorted
- Intake valve timing control solenoid valve may be faulty
- Crankshaft position sensor (POS) may be faulty
- Camshaft position sensor

Jun 25, 2012 | Cars & Trucks

2 Answers

2006 cobalt ss 2.4 automatic trans. check engine light code p0010 p0106


Code P0010 Intake camshaft position actuator solenoid control circuit ( CMP )

most common cause is a bad solenoid, but it could be many componets that could cause the code, if you want to try to repair it on your own the only thing you can do is replace the solenoid, all other componets require some speclized test equipment.

code P0106 manafold absolute pressure sensor ( MAP )

check for a good vacuum source to the MAP sensor if there is a good vaccum source then replace the sensor.

good luck

Oct 19, 2011 | 2006 Chevrolet Cobalt

1 Answer

Code p0010 on pontiac g6


this obd2 trouble code table can help you understand the meaning of code.
and for p0010, you can try following:

Carefully inspect the Bank 1 VVT/VCT system circuit wiring and connectors, repair as required.

With a warm engine, test the operation of the OCV, replace/repair as needed.

Sep 23, 2011 | 2006 Pontiac G6

1 Answer

I have a 2006 Scion xb with a code p0010. I changed the camshaft timing oil control valve but the light is still on. Can anyone help?


P0010 Scion P0010 Scion - Camshaft Position 'A' Actuator Circuit Bank 1 pdf.gif [img alt="Share Code" src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/share.png"> 0 [img alt="P0010 Scion Comments" src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/comments.png"> ' Add Comment - Dirty Oil
- Variable Valve Timing (VVT) circuit is open or shorted
- Oil Control Valve (OCV) circuit is open or shorted
- Faulty variable valve timing (VVT)
- Faulty oil control valve (OCV)
- Damaged ECM


Read more: http://engine-codes.com/p0010_scion.html#ixzz3LSVT0h8C

Dec 13, 2010 | 2004 Scion xB

1 Answer

I HAVE p0010 code Problem.CAMSHAFT POSITION ACTUATOR CIRCUIT


P0010 - "A" Camshaft Position Actuator Circuit (Bank 1)

A P0010 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car's PCM (powertrain control module). That consists of an oil control valve (OCV), also called a solenoid valve and other components. Basically the check engine light and associated P0010 trouble code means that the voltage in the circuit has fallen below a set limit for a specific amount of time (varies by make/model/engine).

Symptoms may include:
* Check Engine Light illuminated (Malfunction Indicator Lamp)
* Rough running
* other symptoms may also be present

Causes: A code P0010 may mean that one or more of the following has happened:
* Faulty oil control valve (OCV)
* Open or short in the VVT/VCT circuit
* Open or short in the OCV / solenoid valve
* Damaged computer (PCM)

Possible Solutions: Some recommended troubleshooting and repair steps are:
* Carefully inspect the Bank 1 VVT/VCT system circuit wiring and connectors, repair as required
* With a warm engine, test the operation of the OCV, replace/repair as needed


Hope this helps to solve it (remember to rate this answer).

Nov 15, 2010 | Chevrolet Chevy Cars & Trucks

2 Answers

Hyundai troubleshooting code p0010


P0010 is camshaft position actuator malfunction. Hope that helps

Jan 15, 2010 | 2004 Hyundai Elantra

2 Answers

My check engine light has come on for my 2006 Ford Fusion and 3 codes came up...P0010, P2104, and P2112. Any ideas what these mean?


Fuel and Air Metering and Auxiliary Emission Controls P2104 Throttle Actuator Control System - Forced Idle
P2112 Throttle Actuator Control System - Stuck Closed
If it's not the pedal, it has to be throttle body, senor or harness related.

Jan 16, 2009 | 2006 Ford Fusion

Not finding what you are looking for?
1999 Ford Taurus Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...