Question about Chrysler PT Cruiser

Open Question

Pt cruiser 2004 error codes p 0032 and p 0038

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2559 Answers

SOURCE: 2004 chrysler pt cruiser starter motor removal

You may sneak it out with small fingers with out pulling out the starter.

If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.

Please rate this a fixya

Posted on Feb 08, 2009

  • 1 Answer

SOURCE: DIAGNOSTIC code P01A4 for pt cruiser

I have the same problem. Pt - 2002, 2.2 diesel. Same mistake number appeared. Noone knows what is it.

Posted on Sep 15, 2009

  • 5 Answers

SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...


Posted on May 26, 2010

  • 1 Answer

SOURCE: pt wont start or turn over

I have a 2005 pt cruser ,have puled stater off, took to parts store had it tested, tested good, took battery in replaced with new one. cleaned all terminals, stick key in ignition,can,t get starter to engage I have all dash lights, windows, headlights,fanmotors, door locks, could this be key switch promblems???

Posted on Jun 25, 2010

  • 52 Answers

SOURCE: PO551 fault code on PT cruiser...power steering??

i would check the power steering fluid to make sure it isn't low. if that checks out then i would just keep an eye on it.

Posted on Jul 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I nave2 codes on a 2004 pt cruiser...1603 and 1604

these are PCM power or communication errors-

Read more at:
Copyright ©

Feb 18, 2015 | 2004 Chrysler PT Cruiser

1 Answer

My 2004 pt cruiser is giving codes : p0016,p0440,p0441,p0522,p0340 what does all this mount down to?

Here's a link to PT Cuiser


Nov 06, 2012 | Cars & Trucks

1 Answer

I have a 2004 pt cruiser. Each week it dies. Something to do with the oxygen sensor. Mechanic said I needed to have the computer reflashed? Any thoughts? Could this be the problem?

if you have replaced the sensor you will need to have the comp cleared some times the comp will hold the error code even though the part is new it will still read as faulty .a simple clearing of the codes should fix the problem.

May 17, 2012 | 2004 Chrysler PT Cruiser

1 Answer

2004 chrysler pt cruiser engine light on error code p0441 it is idling rough what is the problem?

Check the vacuum hoses not even a pin hole,Follow vacuum hose from throttle body to the evap purge solenoid diconnect line at eps can side and hook a hand vacuum pump to eps turn on key don't start add ten inches vacuum no drop in vacuum replace evap purge solenoid if it works it's probally the nvld assembly

Oct 26, 2011 | 2004 Chrysler PT Cruiser

2 Answers

Engine cutting out at 2500 rpm on my 2004 pt cruser and engine light is on ,problem comes and goes ,this is very frustrating on the highway

You can check the engine code by puttuing the key in the rapid recesion turn the key to the on position and back to the off position 4 time ending in the on posistion. Wright the code down and search i on google or at Correct the error.

Jul 26, 2010 | 2004 Chrysler PT Cruiser

2 Answers

After changing the camshaft censor and the car still wont start what could be the problem also is there a fuse that needs to be replaced this is a 2004 pt cruiser the code say its the camshaft censor also...

P0016 crankshaft/camshaft timing misalignment
p0340 camshaft sensor

intermittent crankshaft sensor

PCM detects an error when the camshaft position is out of phase with the crankshaft position

Sep 26, 2009 | 2004 Chrysler PT Cruiser

2 Answers

2003 pt cruiser has 3 errors they are 440,441 and 303. please help

440 and 441 relate to the evaporative prurge flow system and 303 is a misfire detectec in cylinder 3.

May 07, 2009 | 2004 Chrysler PT Cruiser

3 Answers

2004 chrysler pt cruiser with only 25k miles and i got a codes po300 and po301 misfires any help?

Good place to start, but If you check directly with Chrysler there may be a technical service bulletin, that isn't posted yet. Have the codes cleared when work done, and see what happens.

Mar 01, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides