Question about Ford F-350

Open Question

Ck F81B-14B205-FC - F-350 Ford Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Curtis plow stops angling right


Is it hydraulic or electric. I believe hydraulic. If so ck fluid level, ck hoses for kinks, ck hydraulic pump & belt operation & lube linkage. While you ck for any damage, heavy damaging rust or bent framework on the plow hinges & linkage.. Good Luck .

Nov 26, 2015 | Cars & Trucks

1 Answer

How does blend door actuator work


Cost of labor repairing blend door actuator or how do repair it myself on...


http://www.rockauto.com/catalog/raframecatalog.php?carcode=1438374&parttype=10721&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=GBP&ck[PHP_SESSION_ID]=1a361squ2ufjv4dohisie6g810

see above links

May 02, 2014 | 2007 Hyundai Azera Limited Sedan

1 Answer

Where on a car can i get information about tank capacity


the operators guide has it.
and varies by country.
and engine options
and other options.
why not just fill it up from empty, and guess.

if car is USA, is it?
and you know whats on the car, engine size and type. and if 2wd or 4wd and other things, SR 5 and other options.
the login to alldata.com
but for free, you can go to any seller of any tanks and see this.
on 91 they had 5 major option packages. SR5 with V6 too.

the base 4 banger shows 17 and 19 gallon here.
see it?

http://www.rockauto.com/catalog/raframecatalog.php?ck[mkt_US]=true&ck[mkt_EU]=true&ck[mkt_CA]=true&ck[mkt_MX]=false&ck[year_1994]=true&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=kmn2mr0latem2ta7d7s59vvgk2


spectra premium can be seen on line and checked for size.

Jan 21, 2014 | 1991 Toyota Pickup

1 Answer

1995 jeep grand cherokee how can i tell if security module needs reset or has gine bad?


1st know what options are on your,car, learn that first or get stranded.
my wild guess, you forgot to post symptoms?
my wild guess 2 ,is car cranks ok, but dont start? yes?
is the IMMO lamp glowing? immobilzer?
if it glows it will never start
did you check all fuses first? EFI will not run with out power.
nor would the IMMO send the unlock command.
each maker has there own ICONS.
http://dashboardsymbols.com/the-symbols/

on my 08 ,its a very steatly DOT, so on all cars READ the operators guide first.
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1182114&parttype=909&ck[mkt_US]=true&ck[mkt_EU]=true&ck[mkt_CA]=true&ck[mkt_MX]=true&ck[year_1994]=true&ck[ID]=0&ck[viewcurrency]=USD&ck[idlist]=0&ck[PHP_SESSION_ID]=42p7igbgeqj721pmq29bkekfo6

$20
free manuals are a dream, and luck. google them.
here is the fsm.
free
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

now first google hit with your questions, you didnt google it?
http://www.ehow.com/how_7492453_reset-grand-cherokee-reset-antitheft.html


Aug 13, 2013 | Jeep Cars & Trucks

1 Answer

New a/c comressor not coming on


ck for power to coil if power ck coil. if no power ck fuse ck relay for power jump at pressure sensor turn on control to a/c ck relay for signal power if no signal ck control panel if good ck ecm .

Aug 02, 2012 | 2001 Ford Mustang

1 Answer

Blazer won't accelerate


ck fuel pressure ck timing ck cat ck ignition ck throttle body

Jul 15, 2012 | 1998 Chevrolet Cavalier

1 Answer

How do I fix my cruise control


first ck fuse for cruise control,if ok ck power to main switch use a omp, amp meter for test, should have battery voltage to and from switch when in on position. if ok your next ck is steering wheel switch. air bag must be removed unhook battery wait five minutes remove airbag hook battery up ck steering wheel switch if ok below steering wheel is cable reel ck yellow connectors on both side for power if all have power to and from go under hood and ck power to cruise unit if ok pcm may not be letting it come on because of engine or trans readings dtcs pending or set can shut off cruise control

Jul 14, 2012 | 2007 Jeep Compass Limited

1 Answer

My 4WD dash lights are flashing and the 4WD won't engage. Also, my power windows and moonroof won't work. I've checked all of the fuses and they're good. What else should I check?


There's a TSB out for this concern. Its just a faulty relay

adobe.gif Printable View (8 KB) TSB
98-13-19
  • ELECTRICAL - LOSS OF 4X4 SYSTEM
  • LAMP - 4X4 LAMP ILLUMINATED
  • LAMP - NO INTERIOR LIGHTING
  • MOON ROOF - INTERMITTENT OR LOSS OF POWER
  • REAR WIPER - INTERMITTENT OR LOSS OF POWER
  • WINDOWS - INTERMITTENT OR LOSS OF POWER
Publication Date: JULY 6, 1998
LIGHT TRUCK: 1997-1998 EXPLORER, MOUNTAINEER
This TSB article is being republished in its entirety to correct the Service Procedure Steps. ISSUE: A flashing 4X4 lamp and/or a intermittent or loss of:
  • Power windows
  • Interior lights
  • Rear wiper (if equipped)
  • Moon roof (if equipped)
  • 4x4 system (if equipped)
may occur on some vehicles. This may be caused by an intermittent Battery Saver, Accessory Delay or One-Touch-Down Relay operation and possible chafing of vehicle wire harness.
ACTION: Repair the affected circuit, and/or replace the Battery Saver, Accessory Delay, or One-Touch-Down Relay. Refer to the following Diagnostic/Service Procedure for details before replacing any components.
DIAGNOSTIC/SERVICE PROCEDURE Accurately RECORD ALL Diagnostic Trouble Codes (DTCs) from the Generic Electronic Module (GEM). The following codes can be generated by a faulty relay:
  • B1371-Illuminated Entry Relay-Circuit
  • B1302-Accessory Delay Relay-Circuit
  • B1398-One-Touch-Down Relay-Circuit 1
  • B1814-Rear Wiper Motor Down Relay-Circuit
  • B1818-Rear Wiper Motor Up Relay-Circuit
  • P1820-Transfer Case L2H Relay-Circuit
  • P1824-Clutch Relay-Circuit
  • P1828-Transfer Case H2L Relay-Circuit
DIAGNOSIS
  1. If you have any of these codes B1371, B1814, B1818, and/or the interior lights or rear wipers are part of the customer concerns, go to Step 12. Otherwise locate the Accesory Delay Relay and proceed to next Step.
  2. Put key in "RUN."
    1. If conditions are repeatable, go to Step 3.
    2. If conditions are not repeatable, follow standard GEM troubleshooting procedures.
  3. Operate the windows until they fail then proceed to next Step.
  4. Remove relay from relay box then proceed to next Step.
  5. Check for battery voltage at Pin 87.
    1. If battery voltage is present, go to Step 6.
    2. If battery voltage is not present, go to Step 23.
  6. Check for battery voltage at Pin 86.
    1. If battery voltage is present, go to Step 8.
    2. If battery voltage is not present, go to Step 7.
  7. Locate the Battery Saver Relay and check Pin 3 for battery voltage.
    1. If battery voltage is present, go to Step 23.
    2. If battery voltage is not present, go to Step 16.
  8. Return the Accessory Delay Relay back to the relay box then proceed to next Step.
  9. Check for Ground at Pin 85.
    1. If Ground is present, go to Step 10.
    2. If Ground is not present, follow standard GEM troubleshooting procedures.
  10. Check for battery voltage at Pin 30.
    1. If battery voltage is present, follow normal GEM diagnostic procedures.
    2. If battery voltage is not present, go to Step 11.
  11. Check all female terminals at the relay.
    1. If all terminals are tight and all wiring crimps are good, REPLACE the Accessory Delay Relay, then go to Step 22.
    2. Make sure all terminals are tight and all wiring crimps are secure then go to Step 9.
  12. Locate the Battery Saver Relay.
  13. Put key in "RUN."
    1. If conditions are repeatable, go to Step 14.
    2. If conditions are not repeatable, follow standard GEM troubleshooting procedures.
  14. Operate the windows until they fail then proceed to next Step.
  15. Remove relay from relay box then proceed to next Step.
  16. Check for battery voltage at Pin 1.
    1. If battery voltage is present, go to Step 17.
    2. If battery voltage is not present, go to Step 23.
  17. Check for battery voltage at Pin 5.
    1. If battery voltage is present, go to Step 18.
    2. If battery voltage is not present, go to Step 23.
  18. Return the Battery Saver Relay back to the relay box then proceed to next Step.
  19. Check for Ground at Pin 2.
    1. If Ground is present, go to Step 20.
    2. If Ground is not present, follow standard GEM troubleshooting procedures.
  20. Check for battery voltage at Pin 3.
    1. If battery voltage is present, follow standard GEM troubleshooting procedures.
    2. If battery voltage is not present, go to Step 21.
  21. Check all female terminals at the relay.
    1. If all terminals are tight and all wiring crimps are good, REPLACE the Battery Saver Relay, then go to Step 22.
    2. Make sure all terminals are tight and all wiring crimps are secure then go to Step 19.
  22. Verify all concerns are corrected.
    1. If all concerns are corrected, return vehicle to customer.
    2. If all concerns are NOT corrected, go to Step 23.
  23. This is Not a GEM-related issue. Follow standard troubleshooting procedures.

PART NUMBER PART NAME F5TZ-14N089-B Relay - One-Touch-Down And Battery Saver FOAZ-14N089-A Relay - Accessory Delay F77Z-14B205-AA Generic Electronic Module (GEM) (1997 4X2) F77Z-14B205-BC Generic Electronic Module (GEM) (1997 4X4) F87Z-14B205-BA Generic Electronic Module (GEM) (1998 4X2) F87Z-14B205-CB Generic Electronic Module (GEM) (1998 4X4)
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 98-11-6
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION TIME 981319A Perform Pinpoint Tests 1.0 Hr. 981319B Replace Relay 0.2 Hr.
DEALER CODING BASIC PART NO. CONDITION CODE 14B205, 14N089 42
OASIS CODES: 102000, 105000, 201100, 202000, 203200, 206000, 502000, 504000, 508000

Copyright © 1998 Ford Motor Company
2010&c18=modelyear&c21=98-13-19&c35=tsb%2c98-13-19&s=1366x768&c=32&j=1.3&v=y&k=y&bw=1329&bh=453&ct=lan&hp=n&[aqe]

Mar 10, 2011 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...