Question about Cadillac CTS

Open Question

Traction control light comes on car goes into limp mode

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 16 Answers

SOURCE: fail safe engine fail

this can be caused by a few things. Diagnostic Trouble codes needed to diagnose. many auto part store will read codes for free, please post codes

Posted on Jan 30, 2009

GM Elec
  • 1000 Answers

SOURCE: Traction control

Lvan....Have you had the codes pulled for the ABS failure? I would not be supprised if you have a wheel speed sensor failure.
Check with your local Auto Zone or other after market part store, they will pull codes for you for free in most cases.
Let me know.
Regards,

Posted on Feb 10, 2009

  • 202 Answers

SOURCE: EML, Check Engine, Limp Mode

What is limp mode, and it is MiL light( mal function indicator light)it is not EML. Please specify so i can help

Posted on Jul 24, 2009

  • 26 Answers

SOURCE: Check engine light on, traction control disabled light always on

the sylinoid in the trany could be going bad

Posted on Aug 05, 2009

SOURCE: 99 jag xk8. I get stability control fault, car

Check your Throttle

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine and service traction control light on in 3rd limp mode


Check engine light on , check DTC'S - diagnostic trouble codes ! Check Engine Light On If not familiar with this take it to a ASE certified repair shop or dealer . 3rd limp mode ? Do you have a message in the DIC - driver information center , reduced power mode ?
ENGINE POWER IS REDUCED
Engine Control Module Description for the 4.8L, 5.3L, 6.0L and 6.2L engine

Apr 16, 2016 | 2008 Hummer H2

1 Answer

Nissan qashqai engine light plus traction control light come on at the same time and I cant get over 3000 reves


Hi Declan this is called (limp home mode) the computer shuts the vehicle down to half power to get you home. Get to a Garrage and get it diagnosed properly anything more than this is guess work. Regards Jom...

May 08, 2015 | 2010 Nissan Qashqai

2 Answers

Why does my traction control and eml light come on Bmw e46 ?


I'm sorry Roger but you are going to have to get it to someone with access to the plug in diagnostic unit for Beemers.
there seem to be several things going on but when it coughs up the diagnostic info you may go straight to it?

Jun 05, 2014 | Cars & Trucks

1 Answer

TERRITORY 2006 ENGINE RUNS ROUGH WHEN ETC LIGHT COMES ON WHEN IT GOES BACK OFF IT RUNS FINE


The electronic traction control (ETC) is on because of a sensor failure. Run fault codes to find out the reason for the misfiring when the light comes on . It may be connected to a limp mode in the CPU to slow down the car when the ETC has a problem

Feb 14, 2014 | 2006 Ford Territory 4.0

1 Answer

2007 tundra with 5.7v8 lack of acceleration "vsc off" light flashing traction control light on check engine light on


Your truck is in limp mode because your fuel mixture sensor is bad, I think that toyota has put this part back under warranty because of so many problems

Mar 03, 2013 | 2007 Toyota Tundra

1 Answer

Twice now my traction control light has come on, gone into limp mode, engine manegement light comes on, stops but restarts ok,management light clears after couple of hours,


I have had this on B.M.W`s the traction control sensors on the front or rear hubs pack up,the quick way to check this is diagnostics it works cheaper in the long run..Good-luck....

Jan 05, 2013 | Cars & Trucks

1 Answer

I have a 2004 grand prix 3800 engine non turbo. Engine was eratic at cruise with rpms at 1200-2000. rpms would lope 2-300 rpms. I Changed air and fuel filter, and cleaned the throttle body. also checked...


i had a problem with all my lights coming on in my 2006 explore took it to dealer to find out that the battery was dying replaced it and they went away

Mar 26, 2011 | 2005 Pontiac Grand Prix

1 Answer

Sluggish acceleration traction light comes on


this must be a 2.3 miller cycle. it is going into "limp home" mode. when this happens, it wont rev over about 3k, and tcs off/tcs lites come on. it feels a lot like fuel cut. probably the check engine lite is also on, and what codes are stored? most common is P1525/26 and 1540, which are the solenoids that control the abv. the abv controls boost, and when this valve is not working proplerly, the pcm stops communication with tcm, and it goes limp home. if you can locate the solenoids, they are on the back of the engine, right next to the egr valve. from right to left, you need to look at the second and forth. you need to ohm them when they are hot. normal is around 26. if they are over 30, or 0, they are bad. there are other possibilities, but this is most common

Jul 03, 2009 | 2000 Mazda Millenia

1 Answer

Traction control warning comes on and it goes into limp home mode


look at your wheel speed sensors in the back ( this is where I would start)

Feb 12, 2009 | 1997 Jaguar XK8

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...