Question about Hyundai Sonata

Open Question

Transmission safe mode

My transmission is stuck in safe mode

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dpjones1700
  • 26 Answers

SOURCE: 2002 X5 Transmission

Sounds like you maybe having a sensor failure (engine). A computer diagnostic can be performed at the vehicle dealership to determine what caused the fail safe mode to activate.

Posted on Nov 01, 2008

csmock132
  • 4669 Answers

SOURCE: 95 jeepgrand cherokee transmission

What exactly is it doing? 1995 Grand cherokee doesn't have a limp mode for the transmission.

Posted on Jun 07, 2009

miket756
  • 2702 Answers

SOURCE: 91 Mirage. Auto transmission is in "safe mode".

only if some thing has gone wrong it them gos into safe mode

Posted on Oct 24, 2009

  • 4102 Answers

SOURCE: 2002 audi a6 transmission is in safe mode. What

hi, what it usually mean is that you have shifted down in to a lower gear whilst the revs where to high so then your gearbox goes into safe mode to protect it from further damage the only way to reset this is to take the car to a main dealers and have a diagnostic check done.

Let me know how you get on or if you need further assistance ok

Posted on Feb 13, 2010

fieromudder
  • 132 Answers

SOURCE: transmission goes into safe mode when shifting

you may have an output speed sensor that is not responding. past problems i have delt with i end up replacing input and output sensors.

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 nissan marono stuck in fail safe mode. How do you reset


If you're talking about the transmission being in limp-in mode (won't shift out of second gear), don't try to reset it. Bring it to a reputable transmission shop and have them check it out. If you attempt to reset it or clear any trouble codes, they will not be able to correctly analyze the problem (which may be relatively minor) and correcting it may take longer.

Nov 15, 2016 | Nissan Cars & Trucks

1 Answer

To Randy Ohler I m the guy with xg350 came up with code p1723 said open or short control relay then I came up with a/t control relay I'm so confused any other suggestions


P1723 A/t control relay - Stuck on.
This Code is showing that the main control relay of the transmission is stuck on. When that happens transmission goes in to the fail safe mode which is being stuck in 3rd gear to prevent damage to the transmission.

Apr 03, 2016 | Cars & Trucks

1 Answer

Where is the transmission control module located on 2005 Mazda 6


Safe mode limits engine performance, and does not effect transmission, especially not by eliminating first and second.
The main way to get out of safe mode, is to remove the battery long enough for the whole system to discharge and reinitialize, so by changing the battery, you likely already did this.
More likely is why the battery died? If you have a wire rubbed through, that could be shorting everything? Have you done a voltage output check on charging system? But other than linkage switches, the transmission control module is inside the trans oil pan, where all the solenoids are. You can drop the pan to ensure all the connections are solid and jump the solenoids to ensure they are not burned out.

Jan 10, 2016 | 2005 Mazda 6 i

1 Answer

Where is the transmission relay at on a 2002 Mitsubishi Lancer ES?


The transmission does not have a fuse, only a power-up relay located in the under hood fuse panel, near the front of the panel.

If there is a problem with this relay, your transmission will reduce to fail safe mode only. Fail safe is the mechanical-only control which leaves you with Park, Reverse and 3rd gear only, provided there are no internal failures.

What exactly is the problem you are having?

Jun 25, 2015 | 2002 Mitsubishi Lancer

1 Answer

1995 Chevy K 1500 hit by lightning safe mode is on on transmission what can I do to fix it


What is "safe mode"? Do you mean transmission is in fail safe mode (Limp home mode or stuck in high gear)?
Probably missing 12v down to the transmission. At the transmission connector with ignition in on position look for pin E it should have 12v. If it's missing you have a bad fuse or bad ignition switch.

Dec 12, 2014 | 1995 Chevrolet K1500

1 Answer

Have a 1999 GMC Yukon 4wheel drive how do you get the transmission out of safe mode


There are 2 conditions that will trigger this SAFE MODE that the engine is running in. The first is transmission over temperature when the sensor in the transmission senses over-temp situation it reduces engine output to no more than 1500 rpm. The second is low oil level in the engine, which will also limit engine rpm to 1500. One of those sensors is bad or the wiring for one of them is damaged. This SAFE MODE is designed to protect the engine or transmission from further damage.

Dec 01, 2014 | Cars & Trucks

1 Answer

Dtc p1723


P1723 Auto transmission control relay - Stuck on.
This Code is showing that the main control relay of the transmission is stuck on. When that happens transmission goes in to the fail safe mode which is being stuck in 3rd gear to prevent damage to the transmission.

Oct 27, 2010 | 2000 Hyundai Elantra

2 Answers

1999 concorde. in limp mode with check engine


you should also replace the input speed sensor,they should always be done in pairs and i have had both of them bad on numerous vehicles,hope this helps

Sep 09, 2009 | 1999 Chrysler Concorde

1 Answer

95 jeepgrand cherokee transmission


What exactly is it doing? 1995 Grand cherokee doesn't have a limp mode for the transmission.

Jun 07, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Hyundia Trajet code 1723


P1723 A/t control relay - Stuck on.
This Code is showing that the main control relay of the transmission is stuck on. When that happens transmission goes in to the fail safe mode which is being stuck in 3rd gear to prevent damage to the transmission

Jun 25, 2008 | 2000 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...