Question about 2005 Hyundai Tucson

Open Question

Does hyundai tucson have interference timing belt

Is timing belt of the interference type?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: how often do I have to change the timing belt

On the 2L (4 cylinder) engine it is recommended to inspect the belt at 37200 miles and replace the belt at 56000 miles.

On the 2.7L (V6) it is recommended to replace the belt at 60000 miles.

And, both these engines are interference engines (meaning if they break a belt, pistons hit and bend valves) which is not a pretty sight...

Posted on Aug 26, 2008

emissionwiz
  • 75822 Answers

SOURCE: interference engine

all of the engines used in the hyundai's are interference engine's, that does not mean for sure u have bent valves but the chances are u did. source of info Gates timing belt Catalog.

Posted on Mar 20, 2009

martin538
  • 117 Answers

SOURCE: Hyundai Tucson

The transmission filter is inside the transmission. You have to drain out the oil and remove the transmission pan and gasket. The filter is made of metal guaze and is screwed/bolted to the underneath of the valve body.

Posted on Apr 09, 2009

  • 16 Answers

SOURCE: Replacement of timing belt for 2004 Hyundai Elantra

Just the belt if that is all you need. I would replace all the other belts as well. The Water pump pully has to come offYou can visual the pump better at that time. The easiest way to get the pully back on and off is to remove the Power steering resevoir and transaxell mount in fron middle. Jack the engine up as high as you can get it. Put a block under the pan when jacking to spread the push force. this will tilt it back and up so the pulley will stay ion the water pump nub. It is a two piece pully.

Posted on Jul 07, 2009

  • 490 Answers

SOURCE: The type of motor oil for my Tucson

just go to where ever u were planning to buy the oil from and tell them what type of car, make and year it is and they will give u the correct type

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Hyundai Tucson 2.7L V6 - Engine cranks but will not start.


Does it crank normally or does the cranking seem a bit faster than usual? If faster than normal, check engine compression. You may have broken a timing belt. If the compression is non-existent or poor on all cylinders, that is the culprit. Belts often break at shutdown and/or startup, and older belts get stiff if they sit for a while, adding to the breakage risk. If you determine a broken/stripped belt is the case, be prepared for a hefty bill. The parts alone are costly, but since you have an interference engine, you will already have damaged the valves, requiring head removal, repair, and re-installation as well as the new belt.

Oct 14, 2016 | 2008 Hyundai Tucson

1 Answer

How many belts together with tensioners, pulleys and water pumps I need to replace?


then you assume wrong . belts will fail many times before any pulley will

Jan 24, 2016 | 2006 Hyundai Tucson 2.0

2 Answers

Installing watrpump


on a 2006 Hyundai Tucson?

What motor, 4 cylinder or V-6?

Both motors will require the removal of the timing belt in order to service the water pump. The 4 cylinder water pump is not driven by the water pump but the belt interferes with the pump removal. The V-6 is timing belt driven. Timing belts on both engines are fairly easy comparatively speaking however failure to properly reinstall the timing belt will result in catastrophic engine failure on the 4 cylinder model. If you do not have any experience with timing belts I would suggest not doing this repair yourself.

Sep 04, 2013 | Cars & Trucks

1 Answer

Timing belt broke 2005 hyundai tucson. New belt & tensioner& water pump Compression check shows no compression # 2 & # 6. Is it worth it to rebuild top end ?


I would say so, most probably the valves have been bent by hitting the pistons when the belt broke. When the belt breaks, the valves stop mmoving, and the pistons keep moving and will hit the valves and damage them.

Mar 21, 2013 | 2005 Hyundai Tucson

1 Answer

Does the 2002 hyundai santa fe have an interference engine? It has a 2.4L 4-cylinder.


Hi:
All of the engines in Hyundai santa fe are interference engines, so you should regularly change your timing belt. The timing belt also drives the water pump, so it is always a good idea to change that too, if you have the engine apart for the timing belt. Here is a link to check out!

http://www.theautopartsshop.com/auto+car-usa+parts/hyundai+santa-fe+engine-timing-belt.html

Apr 21, 2010 | 2002 Hyundai Santa Fe

1 Answer

How often does the timing belt need to be replaced


Hello cksoucy110: My name is Roger and I will help you. The manufacturer recommends replacement of the timing belt at 60,000 miles. Does not matter if a 4 Cly or v-6 engine. Also be mindful of these are interference engines. That means if the timing belt breaks while the engine is running you will do serious engine damage. You will bend valves and damage pistons. Should you need further help please just ask. Please rate the answer you received as this way I know it was helpful Thank You for using Fix Ya. Roger

Mar 03, 2010 | 2005 Hyundai Tucson

1 Answer

Chirping sounds on start up


Which engine?.. the 2.7 or the 2.0? Based on the description you give, it's probably a drive belt (on the 2.0). On the 2.7, there's only one belt.

Oct 15, 2009 | 2006 Hyundai Tucson

1 Answer

Interference engine


all of the engines used in the hyundai's are interference engine's, that does not mean for sure u have bent valves but the chances are u did. source of info Gates timing belt Catalog.

Mar 20, 2009 | 1990 Hyundai Excel

1 Answer

How often do I have to change the timing belt


On the 2L (4 cylinder) engine it is recommended to inspect the belt at 37200 miles and replace the belt at 56000 miles.

On the 2.7L (V6) it is recommended to replace the belt at 60000 miles.

And, both these engines are interference engines (meaning if they break a belt, pistons hit and bend valves) which is not a pretty sight...

Jul 28, 2008 | 2006 Hyundai Tucson

Not finding what you are looking for?
2005 Hyundai Tucson Logo

Related Topics:

1,383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...