Question about Chevrolet Malibu
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check for clearance between the rotor and the caliper,and caliper to the rim.Make sure one ,or more of the brake pads where not accidently put on backwards,with the metal on the rotor,it happens sometimes.
Posted on Mar 07, 2010
Testimonial: "turned pout to be warped rotors purchased from re so firestone says. replaced rotors. thank you"
REMOVAL & INSTALLATION
NOTE: When adding coolant, it is important that you use GM Goodwrench DEX-COOL® (orange colored, silicate free) coolant meeting GM specifications. On these vehicles, if silicated coolant is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner; at 30,000 miles (48,000km) or 24 months.
Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old.
Disconnect the negative battery cable.
Properly drain and recover the coolant to a level below the thermostat.
Unfasten the cover-to-outlet pipe bolt, which is accessible through the exhaust manifold runners.
Raise and safely support the vehicle.
Disconnect the radiator and heater hoses from the outlet pipe.
Unfasten the outlet pipe-to-oil pan bolt and the cover-to-outlet pipe bolts.
Remove the thermostat, then clean the old gasket material from the mating surfaces.
Posted on Nov 01, 2010
SOURCE: How do I change right
Here's the information I found. This should be in your owners manual if you have one. If you don't and would like a copy, you can email me at firstname.lastname@example.org with your make, model and year and I will be happy to email you a copy. Don't worry no cost to you. I hope this helps and good luck.
Posted on Jun 02, 2011
Tips for a great answer:
Apr 05, 2015 | 2008 Chevrolet Malibu
Mar 07, 2015 | 2006 Chevrolet Chevrolet Malibu
Dec 03, 2014 | 2008 Chevrolet Malibu
Aug 03, 2014 | 2008 Chevrolet Malibu
Jun 23, 2012 | 2008 Chevrolet Malibu
May 09, 2011 | 2003 Chevrolet Malibu
Dec 16, 2010 | 2008 Chevrolet Malibu
Sep 18, 2010 | 2008 Chevrolet Malibu
Jan 18, 2010 | 2008 Chevrolet Malibu
60 people viewed this question
Usually answered in minutes!