Question about Ford Fusion
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
these specilty fixtires are more of a dealer only type item. i doubt youll find one anywhere other than a ford dealer unless you find a used one somewhere.
Posted on Nov 30, 2009
SOURCE: Changed 08 Ford Fusion battery,
Disconnecting the vehicle battery can set fault codes in the computer for "INTERNAL MEMORY KEEP ALIVE MEMORY (KAM) ERROR" (code P0603) or "SYSTEM VOLTAGE LOW" (code P0562). These codes do not normally cause the check engine light to come on unless they are "active" codes, meaning that the problem is occuring on THIS ignition cycle.
The check engine light coming on is most likely not related to the battery having been replaced. However, I have seen wierder things! I would recommend scanning your engine computer (OBD codes) and find out which fault codes are present. If there are no codes other than the ones described above, then clear the codes with the scanner and turn the ignition off then restart the engine to see if the light comes back on. If it does, then there is most likely a problem with your battery or battery cables.
If any types of codes other than those mentioned above are present, then each code must be diagnosed to find the cause.
Posted on Aug 13, 2011
SOURCE: 08 FORD FUSION PROBLEMS
The engine and transmission in this cars drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPEDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
Posted on Jul 17, 2012
it should be flushed out it gels when mixed but before you do all that was it prestones any make any model it has a green color that one is ok
Posted on Oct 09, 2012
Tips for a great answer:
Jun 01, 2016 | 2008 Ford Fusion
Nov 08, 2015 | 2009 Ford Fusion
Feb 15, 2015 | 2008 Ford Fusion
Nov 01, 2010 | 2008 Ford Fusion
Feb 17, 2010 | 2008 Ford Fusion
Nov 30, 2009 | 2008 Ford Fusion
Jun 14, 2009 | 2006 Ford Fusion
Feb 20, 2009 | 2008 Ford Fusion
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: