Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
timing belt tensioner
valve cam gasket
tranny oil change
differential fluid cahnge
upper/lower radiator hose
brake system flush
good luck,i hope this help pls dont forget to rate me thanks
Posted on Jun 05, 2009
SOURCE: The engine light and VSC
your o2 sensor is bad. vsc will go on for any small DTC displayed on the MIL (cel)
P0037 LEXUS P0037 LEXUS - Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
Possible causes - Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM) When is the code detected? The P0037 is set when the ECM detects an excessively low voltage through the heated oxygen sensor heater circuit P0037 LEXUS Description Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECMcontrols the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
Posted on Mar 14, 2011
Tips for a great answer:
Aug 30, 2017 | Lexus Cars & Trucks
Oct 12, 2015 | 2001 Lexus RX 300
Apr 03, 2014 | 2000 Lexus RX 300
Aug 03, 2010 | 2001 Lexus RX 300
Feb 14, 2010 | 1999 Lexus RX 300
Feb 10, 2010 | 2000 Lexus RX 300
18 people viewed this question
Usually answered in minutes!