Question about Cars & Trucks

Open Question

Engine vacume diagram f350 460 engine

I have 1996 f 350 460 eng vacume lines dri rotted need to know where lines go

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1990 cadillac deville vacume line mix-up

I have the same car and my basic diagram is still readable so I will get pic of it for you .

Posted on Sep 09, 2008

  • 651 Answers

SOURCE: Need a vacume diagram

open the hood and see if there is a diagram for vacuum lines on the front rail above the radiator. or under the hood itself.

Posted on Dec 01, 2008

canbruce75
  • 1776 Answers

SOURCE: looking for a diagram of how all vacum lines hook

See if this is what you are looking for. I hope that this helped and best wishes.


11d6b16.jpg

Posted on Jul 30, 2009

ZJLimited
  • 17970 Answers

SOURCE: looking for a vacum line diagram so i can print it 1996 gmc jimmy

GMC S10/S15/Sonoma Pick-Ups 1982-1993 Repair Manual
VACUUM DIAGRAMS (See Figures 1 through 85)

Below is a listing of vacuum diagrams for most of the engine and emissions package combinations covered by this manual. Because vacuum circuits will vary based on various engine and vehicle options, always refer first to the vehicle emission control information label, if present. Should the label be missing, or should vehicle be equipped with a different engine from the car's original equipment, refer to the diagrams below for the same or similar configuration.
Check the link autozone.com (free register), select the year ('91 sample), Brand, Model, Sub-Model, Engine Size and make the next root...
1991 GMC TRUCK S15 4WD 4.3L TBI 6CYL REPAIR GUIDE >> EMISSION CONTROLS >> VACUUM DIAGRAMS

I really hope helps with this (remember rated this help). Good luck.

Posted on Jan 07, 2010

  • 1 Answer

SOURCE: vacume line routing

mechanical condition-vacuum leak
throttle cable not free
idle speed screw misadjusted

Posted on Apr 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Un connected vacum line,apprx.6'' long,cannot find where to connect,looked everywhere within lengt of line.97 sentra vacum skamatic diagram needed.causing chk.eng.lite to come on.p0440.purge...


Hi Michael: here you have two diagrams...

11_7_2011_10_28_18_pm.gif


11_7_2011_10_28_45_pm.gif

DTC P0440 code indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
A code P0440 could mean one or more of the following has happened:
  • The gas cap is not installed or working properly
  • The purge solenoid has failed
  • The canister is plugged and not working properly
Additional details could find in this links Fault Codes on Cars & Trucks or other diagrams in Cars & Trucks Vacuum Diagram.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 07, 2011 | 1997 Nissan Sentra

1 Answer

My 2005 chevy impala started jerking and then it wouldnt chnage gears unless i press the gas all the way to the floor is it the transmission?


no on 05 chevy the transmisson shift is control by vacume look for a vacume line that is dry rooted or has come off start at the engine first then work the way down to the transmisson. a line off or dry rotted any where in the syastem will give you a hard shift sometiimes like a hard jerking motion when
shifting.

Aug 10, 2011 | 2005 Chevrolet Impala

1 Answer

All my vacume lines on my 85 s10 are dry rotted and a bunch of them have fallen apart but i cant find a diegram that even comes close to mine including the 4x4 transfer case can some one e mail me one at...


With out knowing the following your engine displacement and if its is federal, California or high altitude emission than its very hard but this may help. If you go to autozone.com in the repair section you can get a diagram for all. You have to register but its free and they have everything you may need,

Feb 20, 2011 | 1985 Chevrolet S-10

1 Answer

1989 corvette headlights intermittently open


check vacum lines for leaks in the headlight assembly,sometimes they dry rot,the vacum lines] it has to a vacum issue. you may need to replace the vacum lines with new vacum hose. you can but it by the foot at any parts store, but you'll need to carry a peice of old one to get exact size.trace the vacum lines from headlights to the source of vacum canister,just to be sure that the canister itself isn't leaking. look for cracks in the vacum lines along the way.if you find that the canister is cracked,it can be repaired by jb weld and repainted,just to keep it original.thank you for choosing fixya.com

Dec 31, 2010 | 1989 Chevrolet Corvette

1 Answer

2002 4.3 eng blazer, its hard to start .n0 check eng. light ?


The problem is your Fuel Pressure Regulator. this is really common on newer cars to go out.here is the way you can check to see if that is the problem. Locat the fuel rail on the engine. find the little round valve looking thing on the fuel rail that looks like it has a vacume line hooked to it. This is the Fuel Pressure Regulator. All you have to check it is pull off the vacume line going to it and if there is any fuel that comes out of the top of the valve or out of the vacume line this is the problem. there should be no fuel comeing out of it or the vacume line. and this will not cause a check engine light to come on. The regulator could run from $50- 130 depending on. Hope this is the Answer you were looking for

Nov 14, 2010 | 2001 Chevrolet Blazer

2 Answers

Vacume hubs i am looking for the air leak need vacume diagram for a 05 f150 supercrew


IF this is a case that the IWEs will not disengage, it could be the IWE solenoid or the vacuum lines to the IWEs. Could also be a problem with the vent lines from the IWE ( the other vacuum line that runs up into the engine compartment, and just hangs there ).

This is the block diagram of the vacuum lines for the IWE ( not actual routing ). You can use a vacuum pump / gauge to see if the lines will hold vacuum. Don't be surprised if the vacuum lines test OK, there is a TSB on the IWE solenoid where it could ingest water, and allow water in the lines, which will not keep the IWE gears disengaged.

Block diagram of the IWE system
b893440.jpg

TSB on the IWE solenoid ( right click save as )
http://my.voyager.net/~sscully/file_tsb06_08_15.pdf


May 30, 2010 | 2005 Ford F-150

1 Answer

2007 Suburban LT .....I turn air/heat on all options but air will not come out front vents. It only comes out foot vents and/or defrost vents for driver./passenger front windows.


Need to look under hood for a vacume line going to your fire wall. your vents are vacuum assisted and i have had this hose dry rot from the engine heat causing my vents not to work correctly. the hose is normaly about a half inch in diameter and is towards the middle of the enigine compartment.

Oct 15, 2009 | Chevrolet Suburban 1500 Cars & Trucks

2 Answers

A/c turned on while driving messes transmission


sorry need vehicle in front of me to evan contemplate this one,because it could be anything from an electrical fault to a vacumn fault from the loss of vacumn on one of the flap operating valves in the air con system.Sorry i cant give an instant fix ,best of british with this car

Jun 09, 2009 | 2001 Saturn S-Series

1 Answer

97 Dodge Ram 1500 Club Cab w/n turn over


Common problem with Dodge Rams. Nobody has the right parts (dealer only) the right part numbers, or the right diagrams or component lists or locations.
The 5.9 L most likely has no EGR valve, as mine does not. It does however have an Idle Air Control Valve located at the back bottom of the throttle body, which if removed, will show carbon buildup, preventing proper fuel/air mix.
You also may have a vacum leak at one or more vacum hoses on the intake manifold, a leak at the vacum ball that stores vacum for working the vent controls when the engine is off. It looks like a big black ball, and has a vacum line going from the top of the intake to the ball, maybe located behind the RH pass headlight. The rubber hoses dry oput, crack, and rot after a few years due to OZONE exposure from the air. Go ot and buy 6 or 8 feet od 3/32 rubber vacum hose, and replace everything that is suspect. Look for cracked Ts. Dont forget to check the larger vacum hoses that go to the charcoal canister and fuel tank vent valves. The rubber elbows have a tendency to pop off the charcoal canister connectors on a hot day if you overfill the gas tank, and the rubber elbows are old and stretched out.
God Luck.

Sep 25, 2008 | 1998 Dodge Ram

1 Answer

Hesitation at low speed-engine light on


it could be TPS or MAP. corolla dont call it a map but its on the firewall near the brake booster check your vacume lines see if any have come off or cracked or dry rotted. vacume leak could be the problem. there are a lot of them to check.

Jun 30, 2008 | 1993 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...