Question about Cars & Trucks
Turn wiper off they stop in midel of windshield , won't go down to bottom of windshield .
Loosen the nut at the bottom of the blades so that the wiper motor will work without moving the blades. cycle the wipers and allow the motor to come to the rest position. Fit the blades and tension the nut. Pull the arms off the windscreen and cycle the wiper motor to run until it stops put the wipers back on the screen and see where they are. IF parked properly then OK but if any where then replace the wiper motor as the sequencing gear inside is out of sync with the wiper action.
Posted on Dec 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if the coolant light is on or comes on when driving you MUST let the car cool down at lest 1 hour before doing anything, after this cool down time lift the hood [u.s.a.] or bonnet [uk] looking from the front of the car on the right hand side towards the back of the engine compartment is the coolant header tank,about 5inch square black in color [u.s.a.] colour [uk] with a large screw top and some rubber pipes coming from it,this should be topped up with coolant right to the neck of the screw cap when you remove the cap to top up the coolant unscrew it slowly as it may be under pressure you don't want hot 212F[u.s.a.] 100C [uk] coolant in your face do you.good luck.
Posted on Nov 24, 2008
on the base of the antenna mast is a chrome nut (14mm?) unsrew that, then turn radio on , it will eject the guide cable. then insert the new cable, turn radio off and wait like 15sec then the motor will take in the new cable then put the chrome nut back on> thats it
Posted on Jan 30, 2009
check the fuse box the fuse marked wipers .make sure the fuse is not blown .if not check the wiper motor for electricity if good replace wiper motor
Posted on Dec 03, 2009
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
Tips for a great answer:
Jul 25, 2015 | Jaguar Cars & Trucks
Jan 29, 2013 | 2004 Jaguar X-Type
Oct 08, 2012 | 2010 Dodge Ram Pickup 1500
Sep 08, 2011 | 2003 Hyundai Accent
May 06, 2010 | 1997 Chevrolet Cavalier
May 03, 2010 | 1997 Chevrolet Cavalier
Jul 16, 2009 | 1999 Jaguar XK8
May 21, 2009 | 1999 Jaguar XJ
Apr 08, 2009 | 2005 Jaguar XKR
Dec 20, 2008 | 1998 Jaguar XK8
204 people viewed this question
Usually answered in minutes!