Question about 1986 Honda Accord

1 Answer

Need to set timing - 1986 Honda Accord

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1986/make/honda/model/accord/1986_honda_accord_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to set timing from scratch on 1993 Mercury Tracer 1.9L


On the pulley, they are marks that line up with a mark on the head. That is TDC for the cam. Then set the crank to 0 on the timing marks. Put the belt back on.

Nov 28, 2014 | Ford Cars & Trucks

1 Answer

I need to set the timing on my 1991 suburban, I need to find the wire you unhook to set timing and then reconnect for the advance to work ok.


Distributer has two sets of wires coming from it one that plugs into distributer and the other comes out as a set of wires that plug in to another set of wires , set base timing after unhooking the set of wires that plug into the other set of wires

Mar 23, 2011 | GMC V1500 Cars & Trucks

1 Answer

I need to set up the camshaft timing marks on a 1994 mazda b2600


its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Jun 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

1995 acura how do u set the vals and timming


First you will need a service manual or information for this vehicle for the valve lash setting. The procedure is usually removing the valve cover( You will need a new valve cover gasket) putting the # 1 cylinder on top dead center and using wrench, screw driver or allen key,and a feeler gauge. You will need to follow the firing order when adjusting the valves. You will need a timing light to set the timing and also the timing spec. This usually involves warming engine to normal operating temp. clean harmonic balancer and mark the timing mark with some white paint loosen the the distributor hold down bolt hook up timing light and turn distributor until the timing mark on the balancer lines up with the timing mark on the timing cover then tighten the holding bolt back down. Also the timing advance has to be disabled when setting the timing and enabled when you are done. The valves should be set first then set the timing. A Haynes manual available at your local auto parts store should contain pictures and information to help you do this.

Nov 21, 2009 | 1998 Acura TL

1 Answer

Need to change timing belt on a 1981 chevy chevette/ set timing


bottom gear go straight up top gear sets about 2oclock thers a small hole in the gear too line up with a hole in the head use a small drill bit too check this!!!!

Apr 16, 2009 | 1983 Chevrolet Chevette

1 Answer

I have a 93 tracker and need to set timing


no, sorry.
you must add a jumper to the DLC connector.
this freezes the timing and you can now set it
to 8 btdc.

you need to figure out what motor you have.
http://carfix.stufftoread.com/IGN_timing/index.html

the full procedures are here.

Mar 26, 2009 | 1993 Geo Tracker

2 Answers

SETTING TIMING


unplug the relay it should have a black and a tan set of wires, it could be on the fire wall or by te distributor, mark your timing marks on the vibration damperand the timing cover your correct timing setting should be on a sticker under the hood. hook up your timing lite to # 1 cylinder and adjust away. if you need more info let me know.

Oct 25, 2008 | 1996 Chevrolet K1500

1 Answer

Setting the timing belt A new timing belt was put on but the timing was not set correctly. Do I need a new belt entirely or just need to get the timing reset???


you do not need a new belt seeing it was replaced, setting the timing should solve the problem,however this is something that should be done by a good mechanic.

Aug 27, 2008 | 1999 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...