Question about 1996 Audi A4

1 Answer

Do i need to remove the front bumper to change the wing?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Yes

Posted on Sep 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change a front fog light on a Citroen zsara piccasso year 2001


pity...............but the front bumper has to be removed first

the fog lights are held in place behind the bumper........

but..if you just want to replace a duff bulb.......that can be done by

removing the wheel...then the inner wing liner .....then a plastic

cover under the bumper.....to access the bulb.....good luck.

cheers

Jan 05, 2017 | Citroen Cars & Trucks

1 Answer

How to fill r22 ac on 2004 Ford focus


To top up AC then the low pressure connection is under the front wing right side at the front directly behind the bumper ,remove the plastic inner wing at the front to gain access

Jul 31, 2015 | Ford Cars & Trucks

1 Answer

Reolace front bumper 2001 ford focus ghia


raise and support front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps.
undo the screws holding wheel arch liner to front wings (1 each side) and the screws (3 each side) securing the bumper to the wings.Release the 6 securing clips from the top of the bumper cover and the 3 from the bottom. with someone helping, pull out the sides of the bumper and slide forward. Fitting is in reverse order

Mar 14, 2015 | 2001 Ford Focus

1 Answer

How to install front bumper on 1999 cadilac eldorado


have you removed the inner wing lining ? usually held in place by a few bolts/screws , just have a good look around ,may need washing off to get a good look

May 25, 2014 | 1999 Cadillac Eldorado

1 Answer

Remove windwasher resvoir 02 exterra


most modern vehicles require either the inner wing removed or the inner wing and the front bumper to get to the washer bottle

Apr 07, 2012 | Cars & Trucks

1 Answer

How do I remove the panel that hold the rear parking sensors on a 2001 S550?


There are six bolts from the bumper into the rear cross member to remove, accessible from inside the boot. You'll have to remove the rubber plugs to get to two of them. After that, remove the boot lining (that's the "trunk" lining if you're a Yank) and you'll see four bolts (two on each side) that secure the bumper by screwing downwards through the metal wing into the top sides of the bumper. Now go underneath the car, and there are two bolts accessible at the rear of the bumper, accessible from beneath. Now you need to uncrew a pair of 10mm plastic nuts under the wheel arch lining/mudflap and two which are behine the rear wheels. Fold the wheel arch lining away from the bumper and there's a screw in the very front of the sides of the wing right at the point where it connects to the wheel arch. remove these (one on each side) and the bumper will slide backwards and off the body. Voila. Piece of cake. Remember to disconnect the wiring to the rear sensors and pull the multiplug through out of the hole, carefully removing the grommet.

Re-fitting is a bit trickier, so use a couple of beer crates or boxes to hold the bumper up below the rear as you line up the tabs on the air exits and slide the bumper back.

Dec 23, 2011 | 2001 Mercedes-Benz S-Class

1 Answer

How do i replace the headlights


Front bumper requires removal to gain acsess to the lower 10mm bolts. Bumper comes off by removing the 2 10mm bolts on the top of the bumper then unscrew the 2 T30 screws in the front wheel arch liner (bumper side) and then you will be able to see a 10mm bolt reversed into a bracket at the top of the bumper from a inside veiw, remove and repeat for the other side. Then its 3 10mm bolts that secure the front under tray (if yours has one). Then there will be another 10mm bolt to the wing side of the headlamp from a above veiw. Bumper should then just pull off and watch for the connector for the fog lamp harness.

Just the 2 lower headlamp bolts andit should pull from its housing

Mar 29, 2010 | 2003 Jaguar S-Type

1 Answer

How do I remove the headlamp unit on a Jaguar S type 2001 I can only see two nuts one top centre and one to the left and three or four inches lower slightly to the right of the main beam looking from the...


Front bumper requires removal to gain acsess to the lower 10mm bolts. Bumper comes off by removing the 2 10mm bolts on the top of the bumper then unscrew the 2 T30 screws in the front wheel arch liner (bumper side) and then you will be able to see a 10mm bolt reversed into a bracket at the top of the bumper from a inside veiw, remove and repeat for the other side. Then its 3 10mm bolts that secure the front under tray (if yours has one). Then there will be another 10mm bolt to the wing side of the headlamp from a above veiw. Bumper should then just pull off and watch for the connector for the fog lamp harness.

Just the 2 lower headlamp bolts andit should pull from its housing

Mar 04, 2010 | 2001 Jaguar S-Type

1 Answer

How do i remove the front bumper from a 1992 960 volvo?


try looking for the support bolts which should be in line with the chassis,havent touched one in a while but as i remember they have little shock absorbers as well ,on the corners are some fixings as well that hold the inner wings guards and the lower part of the wing

Feb 28, 2009 | 1994 Volvo 940

Not finding what you are looking for?
1996 Audi A4 Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...