Question about 2003 Nissan Murano

1 Answer

Driver door won't lock with key fob

2004 nissan murano driver door won't lock with key fob or switch on door

Posted by on

  • James Huber
    James Huber May 11, 2010

    try using the key. What does that do ?

  • Keith Heavilin
    Keith Heavilin May 11, 2010

    I'm assuming that all other doors lock with both key fob and switch on door?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

Check the locking solenoid / actuator in the door behind the panel, could be burned out or loose wire. It should take about 20-30 minutes to open, fix it and close the door panel if there's no major problem. Autozone might be able to help out with a solenoid.

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to unlock a 2006 Nissan Murano when there's no power


The Nissan Murano now uses an "intelligent key system" for entry. Essentially, there are two methods to unlock the vehicle doors, and both methods require the factory-programmed key fob. You can press a button on the remote or press a switch on the door handle. The vehicle discussed here is a 2010 model, but the process is similar for other Nissan Muranos as well. Consult your year-specific owner's manual for exact procedures for your car Also More Info Would Be good !!!

We Are Here to Help!!!

Donald Deane MCSE,ASE,CPO

Jul 30, 2017 | Nissan Cars & Trucks

1 Answer

How do I program a 2004 Nissan Maxima key fob?


Free Nissan Keyless Remote Programming Replacement Key Keyfob Maxima...

2004 Nissan Maxima Key Fob Programming Instructions

2004 Maxima

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.
  1. Close and lock all doors with the driver's side power lock/unlock switch.
  2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.
  3. Insert key into the ignition cylinder and turn to the ACC position.
  4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
  5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver's side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).
  6. Turn the key to the OFF position, remove keys from the ignition,
    unlock doors using the driver's side power lock/unlock switch and open the driver side door.

Mar 09, 2015 | Nissan Cars & Trucks

1 Answer

Why cant I unlock my Murano with the key or the fob?


replace the latch or chek latch cables or link from lock cyldr

Aug 27, 2014 | 2003 Nissan Murano

1 Answer

2005 Murano doors won't lock/unlock with remote or door switch... Would think it was an actuator if it was one door but all 4 try to work but don't seem to be getting enough power... There is no other...


try this put key in ignition turn to number 2. then press the fob. when the door lock press again to unlock them should work of from there. remeber to replace the battery in the fob first.

Oct 16, 2013 | 2005 Nissan Murano SL

1 Answer

05 dakota doors lock with fob but won't unlock with fob


Your FOB has gone bad. Try your other FOB just to make sure and let me know ....

Apr 14, 2013 | 2004 Dodge Ram 1500

2 Answers

Won't open my door when I press unlock, key won't open door either


can you manually unlock the lock and open the door?? Is it more than one door or just one specific door? If its just one door, yourcactuator inside the door may be bad or you have a wire issue. If its all the doors, more than likely you blew a fuse or a relay(id say fuse)

May 23, 2011 | 2005 Nissan Murano

1 Answer

Nissan Murano (05) Power Locks Sticking


The door lock actuator in that door is weak. Need to replace it.

Jan 31, 2010 | Nissan Murano Cars & Trucks

2 Answers

2003 Nissan Murano Driver door won't lock or unlock with keyfob


The key fob is the remote. But the remote type that works like a key. The remotes that you just need to carry on you to start the car or truck. That is a Key Fob.

Thanks Jay!

Jul 30, 2009 | 2005 Nissan Murano

Not finding what you are looking for?
2003 Nissan Murano Logo

921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...