Question about 2004 Jeep Liberty

3 Answers

Where is the lug wrench and jack storage location

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 40 Answers

Did you look under the back seat? It might be under the back seat on the passenger side. If you bought the Jeep used, the previous owner may not have left them in the vehicle.

Posted on Mar 20, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you adjust a detent cable for a 89 astro van on 700r4 transmission

Posted on May 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Read operators guide yet, get one,
and if parts are missing jeep sells them.
that and the missing book.

Posted on Mar 25, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change tire


You need a jack to lift the vehicle high enough to get the tire off and the new one on, you need a lug wrench to loosen and tighten the lug nuts and depending on the rims you might have hub caps that are part of the rim or seperate and if they are seperate, you need something to pry them off with. So the proper way to do this is:
Before you raise it with the jack, take the lug wrench and loosen the lug nuts a little. This is easier when the tire is on the ground because depending on the tire location, it will turn if you lift it. So when the weight is on it, it wont turn. Then you put the jach under the car and near the tire you are lifting and you use the jack to raise the tire. Then finish taking the lug nuts off. Remove the tire and put the new tire on. You may have to raise the jack some more to make it high enough. Put the lug nuts back on tight as you can and lower the car. Then tighten the lug nuts again to be sure. You should tighten lug nuts by skipping them. In other words start with one and tighten it, skip the next one and tighten the third one. When you go all the way around, go to the ones you skipped and tighten those.

Dec 03, 2013 | 1998 Lincoln Navigator

1 Answer

I am trying to replace a wheel lug on my 01 Diamante can you help.


Buy new lug nuts for your vehicle. These can be purchased at an auto parts store or a tire and wheel store in complete sets, online at wheel retailers and through the dealer that sells your vehicle. Be sure to have your make and model of vehicle available so that you get the right lug bolts.

  • 2 Loosen the lug bolts on your vehicle with a lug wrench or a socket and ratchet. Raise the vehicle with a floor jack at the corner where you are going to replace the lug nuts. You can use the jack to support the vehicle while you replace the lug nuts or you can use a jack stand. If you use the floor jack, be careful as you remove and install the lug nuts.
  • 3 Finish removing the lug nuts on the wheel. Thread the new lug nuts onto the studs that the wheel is mounted on. Tighten the lug nuts as tightly as you can with the wheel still in the air. At some point the wheel will start turning.
  • 4 Lower the vehicle back to the ground. Tighten the lug nuts progressively in a crisscross pattern with a torque wrench to the specifications of the manufacturer. This will vary from make to make but is usually around 90 ft-lbs. Repeat the above steps for the other three wheels.
  • Oct 30, 2011 | 2001 Mitsubishi Diamante

    2 Answers

    Where is the jack and lug wrench located on my 1993 chevy C1500?


    either behind the seat or in the motor section under the hood on the fender wall

    Jun 12, 2011 | 1993 Chevrolet C1500

    1 Answer

    How do you remove the tire off the 2008 Dodge Charger - can't even get the lug nuts off...nothing fits


    you should have a lug nut wrench in the trunk with located with the tire jack that is the proper size for the lug nuts.if you have the original wheel nuts.you turn the wrench counter clockwise to remove them from the car.if they are chrome caps over regular steel wheel nuts then the rust could change the size of the required wrench.size.if you have chrysler road side assitance(3year assitance)then they can get you a tow truck to change the tire if you call the 1-800 # if it hasn`t been over 3 years.other wise you may have to have it towed to a shop.

    Apr 24, 2011 | 2008 Dodge Charger

    1 Answer

    Steps to rear brake replacment


    1. Park the Dodge on a flat, level surface and engage the parking brake. Put two wedges of wood in front of your front wheels and two behind them.
    2. Put the jack under the back frame of the car and lift it up until the wheels are off the ground. Slide the two jack stands underneath the car right under the axles, one next to each wheel. Use the jack to lower the car onto the two jack stands.
    3. Loosen the lug nuts with the lug nut wrench, and remove the lug nuts and the two back wheels.
    4. Look for two bolts that are attached to the caliper. Remove them with the adjustable wrench. Lift up the caliper and set it on the axle, taking care not to let it fall and break.
    5. Compress the brake pads which, in turn, will compress the underlying piston. If they won't budge, use a C-clamp to compress them.
    6. Open the spring clips by prying with a screwdriver and take off the pads. And if the pads are stuck you can pry them off with the screwdriver as well.
    7. Rub a little bit of silicone grease onto the back of each new pad and put the pads in the correct position. Put the spring clips back in place to hold the pads in place.
    8. Put the caliper back in place and tighten the bolts.
    9. Reinstall the wheel and tighten the lug nuts. Lift up the car a little with the jack and remove the jack stands. Lower the Dodge all the way to the ground. Retighten the lug nuts.
    10. Lift up the hood and look for the master cylinder's brake fluid container on the driver's side of the car, closest to the driver. Top off the brake fluid, if needed.
    You will need the following
    • 4 wood wedges
    • Lug wrench
    • Floor jack
    • 2 jack stands
    • Adjustable wrench
    • C-clamp (optional)
    • Flathead screwdriver
    • New brake pads
    • Silicone grease


    Nov 15, 2010 | 1992 Dodge Caravan

    1 Answer

    Replace rear brake pads 2006 Chevy Impala


    Hello, to replace the rear brake pads follow the following steps:

    1. Lift the Chevy Impala with the jack and place it on jack stands.
    2. Remove the wheels with a lug-nut wrench and set them aside. The lug-nut wrench can be found in the trunk of your Chevy Impala.
    3. Remove the caliper with a ratchet and use a bungee cord to hang the caliper. Do not let the caliper hang from the brake hose, as the hose might break and cause fluid to leak.

    4. Remove the brake caliper bracket from the steering knuckle with a ratchet. Set it aside.

    5. Remove the break rotor from the hub. The rotor might require force to be removed; if it does, use a hammer to hit the rotor in the center, where the lug studs are located. Take care not to hit the studs.

    6. Remove the new rotor from its packaging and use brake cleaner to remove the grease from the rotor. Grease is applied on the rotor in the factory to inhibit rust during storage.

    7. Install the new rotor onto the hub.

    8. Install the caliper bracket with new brake pads onto the rotor and fasten it to the steering knuckle. Use a ratchet to tighten the bolts.
    9. Open the master cylinder reservoir so you don't break a seal while compressing the brake caliper.

    10. Compress the brake caliper with a C-clamp, so that the caliper can fit over the new brake pads. Install the caliper by securing it to the brake caliper bracket with a ratchet.

    Thanks


























    Jul 19, 2010 | 2006 Chevrolet Impala

    1 Answer

    Step by step removing and replacing the spair


    Hi my name is Tom and I am here to help you.

    By changing the spare tire, I am going to assume that you mean changing a flat tire using the spare tire. If I am mistaken please advise.

    Locate the area where the spare tire and jack are located. You should see a lug wrench. This would be a X shaped device with closed sockets. Find the correct lug size needed for the Caravan. Loosen the lugs by turning the wrench counter clock wise. A little reminder is (lefty loosey, righty tightey)

    After the lugs are loose, jack the car up using the jack provided. Near each wheel is notches which show you where to place the jack. Do not jack any further then you need to lift the car up. Keep in mind that an inflated tire is larger than a deflated.

    Remove all the lug nuts and replace the flat tire with a good one. Put the lugs back on and hand tighten.
    Lower the car and tighten the lug nuts firmly.

    The only thing I believe I left out was removing the wheel covers. You should find in a packet with the jack a device to unlock the wheel cover. I can not tell you what it is because each car is unique.

    I trust this is detailed enough for you. If not, please feel free to contact me and I will answer any questions you might have.

    Please take the time to rank the information I gave you and how helpful it was. This will help me to do a better job for you and other to follow.

    TomE

    Jun 29, 2010 | 2006 Dodge Grand Caravan

    1 Answer

    HOW DO YOU ACCESS THE JACK AND LUG WRENCH IN A 2005 CHEVY SILVERADO X-TEND CAB?


    fold the bottom of the rear seat up. the jack is there in the open, the lug wrench is under the jack in the vinyl bag.

    Jun 13, 2010 | 2005 Chevrolet Silverado 1500 2WD

    2 Answers

    Where is the spare tire on explorer


    the spare is located under the rear of the truck right under the back bumper theres a special tool with your vehicle in the back storage compartment to let the tire down look under the hatch and youll see the slot where the tool is inserted

    Jan 15, 2010 | 1998 Ford Explorer

    2 Answers

    TIRE JACK AND LUG WRENCH


    Have you loked in the rear qtr panel they have little door 12x12/ Please rate my response thank you very much

    Feb 01, 2009 | 2001 Mercury Villager

    Not finding what you are looking for?
    2004 Jeep Liberty Logo

    Related Topics:

    1,004 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...