Question about 1995 GMC Sierra C1500

1 Answer

Need to replace A/C Compressor

Need to know how to install A/C Compressor on 1995 GMC Sierra. Any recommended repair manuals? How much oil? Is it necessary to replace the accumulator as well?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

U can get that info from haynes repair manual at advance auto parts for 15 to 20 bucks. hope that helps

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Accumalator/drier do i need oil


accumolator,condensor,evaporator all store some oil.compressor has oil as well.if you bought used compressor,you only had to make sure theres about 3-4 of oil in it,no worries,remove a plug on the body of compressor and drain the oil,too much oil in system will prevent it from cooling.

Jul 16, 2013 | 1997 GMC Sierra

1 Answer

I need to install refrigerant and do not know hoe.


If you do not know what you are doing I would suggest taking the vehicle to a mechanic that is certified to perform the repair. If you need to add refrigerant then there is a reason it is low. The leak needs to be found and the system needs to be sucked empty so it can be opened up and repaired. Then it needs refilled and topped of with the correct amount. I have seen it more than once that a customer will add too much freon to a system and do damage to a very expensive compressor. Sometimes a cheap fix is very expensive in the long run.

Apr 21, 2013 | 1995 GMC Sierra C1500

1 Answer

1995 GMC A/.C compressor wont run


bypass the low pressure cut off and put in more freon

Aug 24, 2012 | 1995 GMC Sierra

1 Answer

My heater motor will not come on. I have replaced


Try pulling out glove box & look on top of heater ducting on passenger side.

Oct 02, 2009 | 1995 GMC Sierra

1 Answer

Need to know how to rebuild 5 speed manual transmisson for a 1995 gmc sierra pickup


You're kidding right? Transmission repair is not for amateurs. Heck, most mechanics don't even mess with them: it requires specialized (read: $$$) tools and expertise. Either take it to a transmission place, or buy a rebuilt one and swap it out. You'll be glad you did.

Jul 30, 2009 | 1995 GMC Sierra

1 Answer

I replaced distribitor cap and need to know firing order


I recommend you gert an auto maintence /repair manual from your local auto parts store for 20.00 or so for yor truck.

Jul 12, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Low oil when engine warms up gmc sierra 1995


30-40 psi of oil pressure is fine for many vehicles including your GMC. I am assuming that the truck has more than 100,000 miles on it and still has the original engine in it. By rule of thumb you only need 10 psi per 1000 rpms in a typical street driven engine to give adequate oil pressure to keep the bearings from oil starvation. The oil pressure is typically higher when initial start up occurs because it is more viscous due to the temperature of the oil as the engines oil warms up the visconsity thins out and the oil flows more smoothly. The drop in oil pressure is a normal occurance. Above 45 is more than required for a daily driven street engine. I believe that the specs on that engine only list 30- 45 psi.

Dec 07, 2008 | 1998 GMC Sierra

1 Answer

1999 GMC Sierra a/c clutch replacement


you can buy a puller for this,and i think it can be done in truck

Jul 02, 2008 | 1991 GMC Sierra

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

Related Topics:

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...