Question about 1992 Toyota Camry V6

1 Answer

Water in radiator decrease but not in the reserviour tank

The water decreases in the radiator but not in the reserviour tank and there is a positive pressure air come out from the radiator cup when i try to remove it although the car is cold and not running

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

Get a new radiator cap and make sure the tube from the cap of the res. tank goes into the coolant that is in the tank or it won't draw the coolant back and forth. The tube to thge radiator must also be connected.

Posted on Sep 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Um having a Mazda Axela, 2004 model (Right hand drive) 2300cc. Problem is sometimes the coolant is getting less.

have a compression test done to check for head gasket and cracks. have a pressure test done on the coolant system to check for leaks. Check the drain hole under the water pump as it may be leaking from a bad pump shaft seal . If you have a viscous fan hub then check the operation as they have been known to spin but draw sufficient air through the radiator to cool the coolant.. If it overheats predominantly at stop lights or when idling then replace the fan hub.

Jan 26, 2014 | Mazda Cars & Trucks

1 Answer


Did you bleed the air out of the cooling system?

Apr 26, 2012 | 2007 Jeep Compass 2.4

1 Answer

Sir i have a leak in the radiator of buick roadmaster 1992 but i could not find the leak. The water level in the radiator decreases slightly but the level of water in the water bottle decreses...

There are a couple of tests to get to the bottom of this issue, pressure test the cooling system, first. This should show the issue, look around with lots of light and a mirror....

Jun 25, 2011 | 1992 Buick Roadmaster

2 Answers

I have a 2001 dodge dakota 4.7 litre v8 truck is running hot replaced hoses , thermostat, radiator cap, coolent temp sensor, rdaiator fan relay, flushed system, bleed system, still running hot coolent...

my be the heat sensor indicating wrong reading or you might be having a gasket problem but only if water level is decreasing and/or change into milky or brown color in coolant color

Jun 06, 2011 | 2001 Dodge Dakota

1 Answer

Why the water in the radiator is decreasing

You probably have a slow leak somewhere...pour a little black pepper in the radiator. It helps a little in slowing down leaks.

Apr 22, 2011 | 1997 Honda Civic

1 Answer

My thermostat indication is on H. When I turn on the heater the indication drops to 50%. I have 75% of antifreeze in the reserve tank.

1. Does your radiator fan works when the temperature indicator on H?
2. Have your flush clean whole cooling system and put fresh new coolant to resolve problem?
3. Does reserve tank amount ever decrease?
4. Have had the thermostat function checked?
5. Technically when you turn on the heater it bypass the thermostat line and goes into heater and after giving up heat enjoins radiator return line.
Happy hunting, cheers

Nov 19, 2010 | 2002 Mitsubishi Galant

1 Answer

2000 toyota Avalon engine light on and car loses power or pressure when driving. Appears to shift into another gear or decreases gears

It is running in limp in mode you need to take it to autozone and get engine codes or go to toyota and have them pull codes, you could damage the car if you keep driving it. Without the codes it's hard to tell whats wrong, but be sure engine oil is full and the transmisson oil is full and the water in the radiator iss full, don't trust the overflow tank and check the radiator when cold.

Nov 20, 2009 | 2000 Toyota Avalon

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides