Question about 1998 Toyota Corolla

3 Answers

How can I fix the door handle on the inside of 1999 Toyota Coroll

How can I fix the door handle on the inside of my 1999 Toyota Corolla Le? I have to roll down window and open from outside to get out. The handle on inside no longer opens door.

Posted by on

  • asmtla May 25, 2009

    Thanks... I was able to unscrew the inside door handle itself. It turns out the clip from the handle was broken that the rod sits in. I just replaced it with the driver rear handle... The only difficulty I had was popping the end of rod back into the replaced door handle.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 2,007 Answers

It's probably broken, or unhooked. Just take your inner door panel off, and you'll soon figure out what's happening. Sometimes the rods get bent, or they come off the clip, or just need adjusting. And sometimes the handle itself is broken, but you can do it!

Posted on May 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I take passenger electric door panel off a 96 toyota corolla?

Posted on Jun 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Here is step by step pictures how to open:
http://www.bodyshopzone.com/archives/trim/door_panels/Toyota/Camry_2000_front/removal_f4.html
Fixing will be obvious as you you can see what's missing. The handle you mention has a rod that connects to the lock. One side of that rod is loose.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help inside door handle for toyota corolla won't open


you need remove the door panel maybe you have only a loose pull wire between the look door or door handle

Aug 27, 2012 | 1989 Toyota Corolla Sedan

1 Answer

The rear door on drivers side of 1992 Toyota Corolla is broken. my grandson tried to open the door when it was locked then it would not open using the outside handle, but would open using the inside...


Actually, I suggest going to a junk-yard to get your parts. It will be much more expensive to get at your dealership or bodyshop, plus the huge huge huge labor fee. If you want to invest a few minutes to save yourself some time, look to see what other vehicles use the same door handle yours does, (it will be a toyota).

Mar 17, 2010 | 1992 Toyota Corolla

1 Answer

2001 Toyota Corolla LE 4 door rear axle noise I believe


First thing I would do is to get a chassis lube job. Many places that do oil changes will also do a chassis lube for you at the same time. The axle bearings can get dry and do require lubrication. If left to long without a lube job, pits can form inside the bearing and will require replacement.

Sep 21, 2009 | 2001 Toyota Corolla

1 Answer

How do i remove the backdoor panel to replace window on 2003 toyota corolla le?


Remove the rear door armrest by prying upward (secured with 3 clips/claws)

Remove the rear window switch assembly by prying upward (secured with 4 clips/claws)

Remove one phillips head screw from behind the inside door release handle.

Remove two phillips screws from either side of the door pull pocket

Pry the bottom edge of the panel away from the door, releasing 7 pop-in fasteners

Lift up on the panel to remove it from the door.

Once inside there will be two 10mm bolts holding the glass onto the regulator.

Sep 10, 2009 | 2003 Toyota Corolla

1 Answer

1991 corolla door rod handle plastic clip broken


You can get inside door handle either new or used from sellers on ebay. It should be just a few dollars plus shipping. Just search ebay for "Inside door handle 1991 Toyota Corolla."

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

Aug 01, 2009 | 1996 Toyota Corolla

1 Answer

I need to replace front interior door handle on 1999 corolla


Yes you will need to remove the door panel if you can not see the rod that connects to the handle.

Mar 20, 2009 | 1999 Toyota Corolla

1 Answer

Replacing a manual door mirror on 1999 toyota corolla


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Feb 27, 2009 | 1999 Toyota Corolla

1 Answer

1999 Toyota Corolla Drivers side door handle broke during freeze


very easy there are little cover u need to take screws out of the pull the trim panel starting from the bottom take mirror cover of and pull the trim of there is a vapor plastic easy after that

Jan 26, 2009 | 1999 Toyota Corolla

2 Answers

How to fix 1999 Toyota Corolla Outside Drivers Door Handle LH?


i have a corolla i have been through 3 drivers door handles for some reason they break fairly easy the handles aftermarket are usually 50 bucks or so and i should take about an hour to replace so idk what ur mechanics hourly rate is but this should be a rought idea

Dec 23, 2008 | 2000 Toyota Corolla

1 Answer

1999 Toyota Corolla interior door handle


There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now. 

Aug 11, 2008 | 1999 Toyota Corolla

Not finding what you are looking for?
1998 Toyota Corolla Logo

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...