Question about 2007 Suzuki XL-7

2 Answers

Pins on the fuel door broke. Can I fix that or do I need to order a whole new door kit. I cannot find them online anywhere.

I have a 2003 Suzuki XL7 (Color Black Pearl 3). The fuel door has broken off-that is to say the two pins that hold the door on have broken. I have the door and wondering if there is any way to replace it myself or do I need to buy a whole new door kit? I cannot find what I am looking for online anywhere.

Posted by on

  • Anonymous Mar 19, 2014

    the dealers says there is apin that broke off on teh steering column and the entire column needs to be replaced. i need a diagram to see what it looks like in order to look fir new part that is not broken

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I still had the gas door, so I went to Home Depot and bought 4 round heavy duty magnets and secured them with epoxy inside the four corners of the gas door and body of the car around the fill area. Now my gas door just attached by magnets instead of a hinge.

Posted on May 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Buy another door you can locate them on line for around thirty five dollars...by the time you buy the magnets and glue you have almost the cost of the new door. Not to mention the safty hazard. If the magnets let go while driving the car in back of you may be hit with a flying fuel door............your liability not to mention the danger going thru the car wash!!!!!!!!!!!!!!!!! be smart and safe!!!!!!!!!!!

Posted on Nov 05, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2003 suzuki xl7. I smell gas fumes. Any ideas where it could be coming from?


Something is broken could be broken line is three or loose line near the engine.

Aug 07, 2017 | 2003 Suzuki XL-7

1 Answer

I need a wiring or instalation diagram for 03 silverado


Download manual from the attached link: https://www.gmupfitter.com/publicat/2004_BB/2003_Beyond_LD_Electric_CK.pdf
http://alarmsellout.com/support/diagrams/vehicle/CHEVROLET%20SILVERADO%201988-2005.pdf

This may help:
http://www.automotivetroubleshootingsecrets.com/2003_Chevrolet_Silverado_1500_4.8L_No_Start_Stall.html

This may help:
2003-2006 Chevrolet Silverado Wiring Diagram:
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2003-2006 Chevrolet Silverado . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections.

PART COLOR LOCATION 12 VOLT CONSTANT RED (+) @ IGNITION SWITCH HARNESS STARTER YELLOW (+) @ IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 PINK (+) @ IGNITION SWITCH HARNESS IGNITION 2 WHITE (+), SEE NOTE #2 @ IGNITION SWITCH HARNESS IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 BROWN (+) @ IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) GRAY/BLACK (-) @ BCM, BROWN PLUG, PIN B2, SEE NOTE #3 PARKING LIGHTS ( + ) BROWN (+) IN DRIVERS KICK PANEL POWER LOCK SEE NOTE #1, (for BASE MODEL TRUCKS, SEE NOTE #4) POWER UNLOCK SEE NOTE #1, (for BASE MODEL TRUCKS SEE NOTE #4) DOOR TRIGGER GRAY/BLACK (-)(DRIVERS) and BLACK/WHITE (-)(PASSENGER), SEE NOTE #5 @ EACH DOOR MODULE, IN EACH DOOR DOMELIGHT SUPERVISION GRAY/BLACK (-) @ BCM, BLACK PLUG, PIN E, SEE NOTE #3 TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN BLACK/YELLOW to BLACK (-) @ STEERING COLUMN HARNESS TACH Any wire NOT, PINK, BLACK or BROWN (AC) @ IGNITION COILS or FUEL-INJECTORS WAIT TO START LIGHT DK. BLUE (-) @ INSTRUMENT CLUSTER, PIN A2 BRAKE WHITE (+) @ BRAKE PEDAL SWITCH FACTORY ALARM DISARM LT. GREEN (-) @ DRIVERS DOOR MODULE, IN DOOR, BLACK 26-PIN PLUG PIN 15 ANTI-THEFT GM'S PASSLOCK 2 ANTI-THEFT SYSTEM, SEE NOTE #1 @ IGNITION SWITCH EXTRA INFORMATION NOTE #1: This vehicle uses GM'S PASSLOCK 2 ANTI-THEFT SYSTEM that requires a 791 Bypass Module to Remote Start, if you are using a REMOTE STARTER ONLY, use the 791. IF you are installing a REMOTE STARTER with KEYLESS ENTRY you MUST USE the INTERFACE BYPASS MODULE, Part # DB-ALL or XK09, EITHER Bypass will do the Anti-theft and Keyless entry. If connecting a keyless entry only you can use the GMDL-BP. NOTE #2: The IGNITION #2 wire WHITE must be connected to prevent a CHECK ENGINE LIGHT from turning on and to prevent DAMAGE to the TRANSMISSION on this Vehicle. NOTE #3; The BCM is located under the Drivers Side of the dash, the BCM has 6 plugs on it, with the PURPLE plug on the back. NOTE #4: On BASE model truck the DOOR LOCK INTERFACE MODULE is not necessary, the LOCK wire is a LT BLUE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B5, and the UNLOCK wire is a WHITE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B10. NOTE #5: On BASE Model trucks, the Door Trigger wires are @ the BCM, LT BLUE PLUG, PINS B4 and A5. On 4-Door Trucks the LEFT REAR Door is a LT BLUE/BLACK (-) PIN A3 and the RIGHT REAR Door is a LT GREEN/BLACK (-) PIN A2, located in a PURPLE PLUG at the BCM, use all 4 wires and diode isolate when installing an alarm system.
03 silverado wiring diagram-dfydxumns33ohqc3bsmt22yf-2-1.jpg

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-4.gif

2011-03-28_044351_brakes_lamps_circuit_2003_2500_siverado-dfydxumns33ohqc3bsmt22yf-2-8.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-13.gif

chevroletsilveradohorncircuit_thumb-dfydxumns33ohqc3bsmt22yf-2-19.jpg

chevrolet-silverado-wiring-diagram-wire-diagram-dfydxumns33ohqc3bsmt22yf-2-26.png

collection-fuel-2003-chevy-silverado-wiring-diagram-estimation-information-standard-work-therefore-straight-swapped-dfydxumns33ohqc3bsmt22yf-2-34.jpg

drivers2-dfydxumns33ohqc3bsmt22yf-2-43.jpg

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-53.png

passen2-dfydxumns33ohqc3bsmt22yf-2-64.jpg

sensor-primary-2003-chevy-silverado-wiring-diagram-fuel-pump-plugs-solid-conductors-important-looking-more-channels-dfydxumns33ohqc3bsmt22yf-2-76.png

2011-03-07_083537_3-7-2011_12-28-24_am-dfydxumns33ohqc3bsmt22yf-2-89.png

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-103.gif

2011-05-14_175028_2003_stop_lamps-dfydxumns33ohqc3bsmt22yf-2-118.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-134.gif

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-151.png

Apr 16, 2017 | Cars & Trucks

1 Answer

Wiring diagram wipers 2003 Suzuki xl7


in what country?
you left off the dash, XL7 is not a XL-7 but 2003 is best clue.
usa
$4 see the real book, not fake, official

https://suzukipitstopplus.com/Products/10057-2003-grand-vitaragrand-vitara-xl-7-service-manual.aspx

Mar 05, 2017 | 2003 Suzuki XL-7

1 Answer

Change front. Axle in Suzuki xl7. 2003


try to be specific.
no bad part was named, or job or anything.
what's yah do'n mista? anon.?
so are you replacing the whole AXLE total.
or just one part of and axle, , 4WD setup.
touch the part, and say what you are doing,first.
then ask for help.
no matter, you could have read at alldata.com , its there.
and at, omg suzuki,.

what if the axle does not want to change>? LOL.

Sep 19, 2014 | 2003 Suzuki XL-7

1 Answer

Timing mark locations for 2003 3.0 suzuki xl7


3.0?????
cam>? what are you timing, we cant guess that, ?
2.7L V6?????? (or 2.5 in some countries)
the cam chains?
there are 46 steps and 12 marks,
ever seen alldata.com , read the engine mech, chain section
suzuki pit stop?
https://suzukipitstopplus.com/Products/10182-2007-xl7-service-manual.aspx


best source is.
http://www.scantool.net/software/alldata-diy-1-month-subscription.html



Apr 23, 2014 | 2003 Suzuki XL-7

1 Answer

Replace fan belt on Suzuki XL7 2002


how do you get in to replace the belts? Do you have to remove the fan?

Oct 10, 2012 | 2003 Suzuki XL-7

1 Answer

2003 SUZUKI XL7 2wd v6 \r\nRear wheel bearing making noise. How do you know for sure that is the problem and is bearings all i need I have ABS. How do I remove the bearing or the hub if that is what I...


remove the wheel and firmly hold the hub that encloses the wheel bearing. Now see if you can rock the hub
If so the bearing is bad
You will need to remove the braking system first to gain access to remove the hub assembly
the bolts are on the back side which is 3 of them

May 22, 2011 | 2003 Suzuki XL-7

Not finding what you are looking for?
2007 Suzuki XL-7 Logo

1,238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...