Question about 2004 Ford F350

1 Answer

I need to know where to find the computer module on an F-350. (I am looking for the factory remote lock code which is supposed to be printed on the computer module.) There is a small black box underneath the passenger side front seat; is this it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 500 Answers

Your looking for the keyless entry modual, it is undr the dash on the drivers side- if you can't find it take it to your local ford dealer, they can pull the code out of the computer with a scan tool

Posted on May 19, 2009

  • 1 more comment 
  • Jason Phillips
    Jason Phillips May 19, 2009

    your looking for the keyless entry modual, it is undr the dash on the drivers side- if you can't find it take it to your local ford dealer, they can pull the code out of the computer with a scan tool

  • Jason Phillips
    Jason Phillips May 19, 2009

    your looking for the keyless entry modual, it is undr the dash on the drivers side- if you can't find it take it to your local ford dealer, they can pull the code out of the computer with a scan tool

  • Jason Phillips
    Jason Phillips May 19, 2009

    your looking for the keyless entry modual, it is undr the dash on the drivers side- if you can't find it take it to your local ford dealer, they can pull the code out of the computer with a scan tool

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where is the computer module on the 2006 f350


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 02, 2012 | 2006 Ford F 350 Super Duty

1 Answer

How to reset the lock combination on the outside of the driver side door?


You have to input the the 5-digit factory code then press the 1-2 button. Input your new code and the locks will cycle to verify the code. You can further test the code by inputing it then pressing the 3-4 button to unlock all of the doors, pressing the 5-6 button to open the liftgate glass, or pressing the 7-8 and 9-0 buttons simultaneously to lock all of the doors.

If you do not know the factory code, you can find it on the computer module located behind a section of trim near the passenger rear door. To see the module, open the door and fold down seat. Carefully remove the plastic trim section at the seatbelt height adjust. You should see a green connector behind the trim. In the next trim section below this, you will find the module. Carefully loosen but do not remove the trim starting at the door. You do not have to remove the entire trim section to see the module. The module will have an alpha-numeric number such as 5X98E-00F4-HA001 and a 5-digit number printed on the label. The 5-digit number is your factory code. Snap all of the trim back into place in reverse order and you should be good to go.

Nov 12, 2010 | 2003 Mercury Mountaineer

1 Answer

Lost keys for chevey truck 2000 utility truck 350 chevey truck need to know how to disable factory alarm system to start the truck


This is close to imposible, you would need a scan tool to reprogram a need chip code into the computer, now if theres no chip the power locks or the door lock should deactivte the alarm system, if you dont have a door key then you would need to remove the door panel and manualy turn linkake on the lock as if it were the key, but i think the 2000 had a key chip.

Oct 03, 2010 | Chevrolet 2500 Cars & Trucks

1 Answer

Door key pad coad. where is it


How to find the Security Keyless Keypad Code on the 1995-2001 Ford Explorer or Mountaineer and how to use the Keypad functions. The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo).

0f6728f.jpg

You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1999 Ford Explorer

1 Answer

How can i program my door lock code or find out what it is. on my 2000 limited edition explorer


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed.
FORD KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-I found that some Explorer/Mountaineers enter program mode after 5 times-not 8.

Here is the link for further info.


http://www.2carpros.com/how_to/how_to_reprogram_key_remote_fob.htm


Your factory code is on a card in the owners manual. If that is lost, access the control module in the cargo area behind the left cover panel.

You MIGHT be able to see the code printed on it, or you might need to pull it out in order to see it.

May 27, 2010 | 2002 Ford Explorer

1 Answer

Remove or disable keyless entry code.


this code is located on a module on inside left rear panel where your car jack is located you will need a flashlight to look up on the module there will be a sticker on this module with 5 digits this will be the original factory code to lock or unlock your car . inside your owners manual there is a procedure to change the code .

Mar 19, 2010 | 1994 Ford Explorer Limited

3 Answers

WHERE DO I FIND THE KEYPAD CODE FOR MY 1997 FORD EXPLORER


The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo). You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

The last weekend I search my RAP, find label for read code and now is working.

RAP Location...
530d8ab.jpg


Label Code location...

9fa0a4d.jpg

I really hope help with this; remember rated and comment this help.

Feb 16, 2010 | 1997 Ford Explorer AWD

1 Answer

Find door entry code 2001 sport trac


The module is behind the left hand quarter trim panel. It will have a sticker on it with the 5 digit factory code.
You can also retrieve the number with a scan tool if you know somebody that has one. You have to have one that is able to look at PID data then access the RAP module.
Once you have the factory code you can program any 5 digit code you want by pressing the factory code then the no. 2 button then enter your 5 digit code. This code will remain unless battery goes dead in vehicle.

Feb 26, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

Door key pad, won't unlock door


  1. Enter the permanent factory remote keyless entry (RKE) keypad code.
  1. Press the 1/2 button within 5 seconds to activate the programming mode associated with the memory position 1 settings. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 1 settings. Entering any new personal code automatically erases the old personal code.
  1. Press the 3/4 button within 5 seconds to activate the programming mode associated with the memory position 2 settings. Holding the 3/4 button for more than 2 seconds after activation erases the stored personal code.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 2 settings. Entering any new personal code automatically erases the old personal code.
  1. Press the 5/6, 7/8, 9/0, 7/8 and 9/0 button within 5 seconds to activate the programming mode or allow the system to timeout.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.

Jan 23, 2009 | 2005 Ford Freestyle

1 Answer

1999 windstar- non functional windows, cruise, radio


Looking at a wiring diagram ,the BCM has nothing to do with the cruise control . This vehicle has two different body control modules ,the (FEM) front electronic module an the (REM) rear electronic module . The power door locks are controlled by these two modules . The door lock switches are inputs to the (FEM) . The driver door lock is also controlled by the (FEM) . The right front and the rear door locks are controlled by the (REM) . The power windows are not controlled by these modules ,so it is not a faulty body computer . An where did you check codes ? Takes a factory or professional type scan tool to read these codes . No code reader , they just check PCM - engine codes . The power mirrors are not controlled by these modules either . Nor is the radio .
Looking at a wiring diagram i see the power mirror's and the power window share a common ground point G-305 , so does the rear radio controller ! (if your vehicle has one )
Buying an replacing parts is no way to fix these problems ! Using a wiring diagram and a DVOM - digital volt ohm meter to test the electrical circuits of these systems is the way to find the problem . Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size . Then under system click on body an Accessorys , subsystem click power windows . Check for B+ voltage to the master window switch , check for a good ground .( Loaded circuit test ) Do you know what that means ? Watch these videos !
Electric Testing Techniques You Need to Know
Voltage Drop Essentials TST Motor Age
How To Read Wiring Diagrams Schematics Automotive

The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...



Jun 13, 2017 | 1999 Ford Windstar

Not finding what you are looking for?
2004 Ford F350 Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...