Question about 1994 Lexus LS 400

1 Answer

1994 Lexus LS400 Broken Hood Cable - Hoe could I replace?

Thanks for your reply!!
The Cable broke with the hood up. The cable is frayed inside the car, broke from the latch. When I look at what the cable connects to under the hood, I can't seem to remove the hood latch to disconnect or reconnect a new cable. There are two cooling radiator fans in the front under the metal piece holding the latch. I removed two screws which loosened the latch just a little but can't pull it out to get at it.

Do you know how I would attach the cable to the latch under the hood?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexus Master
  • 14,036 Answers

You have to route cable along the fender side under the hood like on battery side. you have to run it where it wont get in contact with drive belt.your cable has a ball of metal at the end of it.your hood latch should have a clip where you put your cable in it.you should not have to remove nothing.just drop cable in place.

Posted on May 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood latch broken on Lexus RX330


It's not the cable if you can open the hood from inside. The mechanical safety latch is broken. If you can find one in a junkyard, get it, otherwise, it's off to the dealer to order it which will be more expensive than the junkyard version.

May 15, 2012 | 2004 Lexus RX 330

2 Answers

Hood cable broken,how to unlock the hood on 1994 buick park avenue.


if there is no cable left to grab onto and pull inside the car you can get to it from under the car
it is tough to do and in a tight spot, you have to reach the mechanism and pull it to release

Sep 12, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

MY INSIDE HOOD RELEASE HAS BROKEN. IS THERE ANY


depending on where the cable is broken your can still release and open the hood. if it is broken inside the van in the footwell is the easiest...locate the end of the cable and with a set of visegrips pull the cable to release the hood.

Dec 07, 2009 | 1994 Plymouth Grand Voyager

1 Answer

Release cable is broken on 2000 grand prix unable to open the hood


depend where it`s broke if lever inside the car is broke try getting some plyers on the cable to open the hood and replace cable once hood is open

Oct 07, 2009 | 2000 Pontiac Grand Prix

3 Answers

Hoe do I open the hood when the cable is broken at the latch


your gonna have to go from under car with long screw driver and push release arm or try to go from grill,garb any part of cable and pull. good luck.

Oct 01, 2009 | 2005 Pontiac Montana

1 Answer

The cable broke which opens the hood in my 1994 Lexus LS400. What is the best way (least expensive) to replace this cable? Thanks


if it broke with hood open its not going to be hard to replace it.first you go to auto parts place or dealership buy the cable feed it through the floor board to the hood where cable goes. if hood cable broke with hood down its going to be hard to see or get to the hood open mechanism.through the radiator open under neath the front bumper.

May 16, 2009 | 1994 Lexus LS 400

2 Answers

Hood release broke


you are going to have to either remove the panneling to get at the cable and pull it with vise grip or try to get up inside the hood from the front and release the latch that way . either way is going to be tough to get to.

Mar 01, 2009 | 2000 Dodge Intrepid

3 Answers

Hood release cable is broken


Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.

Dec 25, 2008 | 1998 Chrysler Concorde

Not finding what you are looking for?
1994 Lexus LS 400 Logo

Related Topics:

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...