Question about 1999 Ford Taurus

1 Answer

Pad brake with noise when drive at stone street. noise at compreessor when start

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Very limited info on this but i will try :)

take the pads off and sand them a little with some sand paper. sometimes there is metal flaks that will be a noise maker int he pad. if they are new warranty them out if not try the sanding. For the noise when starting the car try tightening your Ac belt or applying some belt dressing. It might be time for a new belt.

Good luck Hope this Helps

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

There is a grinding sound when I press the brakes on my Hyundai 2010. What might be the problem?


Hi,
If it is a grinding noise then you have a problem with the brake pad area, it may have a stone caught in this area. Or it may have worn front brake pads.

Jan 23, 2011 | Hyundai Sonata Cars & Trucks

2 Answers

I have a 2002 Passat V6 Wagon and the brakes and rotors were replaced (aftermarket parts) about 3 months ago. The CV boots were replaced 2 weeks ago. When I apply the brakes, about 3/4 of the way down,...


Check and see if the Brake Pads were re-installed with all the hardware, ie, Anti-Rattle Clips, shims etc. if your pads are not secure in the Calipers it will cause the pads to rattle when you are driving in effect causing your brakes to make weird noises, ie, groaning, squealing, rattling.

Sep 08, 2010 | 2003 Volkswagen Passat

1 Answer

When i step on the brakes, they make a noise like a machine gun.


possible that the calipers are loose or the disc pads are loose or maybe some stones have got entangled within.
Find out the side of the noise and remove the wheel to check for the noise. If so remove the wheel assembly and remove the wheel pads to clean and set.
However if the noise is from the drive shaft check if any linkages are damged

Aug 30, 2010 | 1995 Saturn Sl

3 Answers

Brake pad replacement. My brakes are making a squeeking sound as I drive. Sounds like rotor or brake pad problem.


Here is Video of How to replace front brake pads and rotors, and rear brake pads on toyota camry solara 2006

Mar 16, 2010 | 1991 Toyota Camry

1 Answer

Grinding noise


Usually a grinding noise in a disc brake is caused from a rotor with a raised edge that froms from normal wear. The raised edge is not a big deal until you install NEW disc brake pads. All of the sudden you have a grinding noise everytime you apply the brake because the NEW disc pad is being ground down but the raised surface created from the OLD Disc Brake Pad. Most of the time the Brake repair shops turn rotors on the car when the pads are replaced and this grinding symptom does not manifest itself.

On and OLD set of disc brake pads over time that raised area on the rotor starts to flake / rust / corrode and can come in contact with the brake disc pad when the brakes are applied.


Hope this explains it well enough.

Thanks for using FixYa.

Feb 12, 2010 | 1993 Toyota Celica

1 Answer

2005 GMC Canyon 4x4 clicking noise in rear end when in drive. Starts at about 20mph. At first, noticed a squeeking noise when in reverse. that went away.


Stones in tire treads? Pull the rear wheels for a look-see. Inspect brakes and all hardware. Have then lubed. Make sure linings or pads are not glazed to eliminate squeaking noise.Make sure parking brake works properly and smoothly. It may beone or more of those things. Good luck there, pardner.

Jun 10, 2009 | 2005 GMC Canyon

1 Answer

Squeaking noise at low speeds


take the front wheels off and look between the brake scratch plate and the rotor. - a stone trapped there will cause this noise. Also between the driveshaft and the hub, where the shaft enters the hub at the back. l
Look too for either a support bracket for a brake line or ABS wiring touching the driveshaft. Also there is an antisqueal spring on the back of the brake calipers someotimes this will touch the outside of the brake rotor, you'll see a shiny mark on the rotor if something is touching. Also the scratch plate on the back of the rotor can touch the inside of the wheel rim, again look for a shiny mark all the way around the inside of the rim. Lastly look at the face of the brake rotor for a circular scratch - indicates a stone stuck in the brake pad. Have fun!

Jan 07, 2009 | 2000 Dodge Neon

1 Answer

Squeal which sounds like it's underneath the car.


Do you know if he turned the rotors when brakes were done?

Dec 01, 2008 | 2000 Toyota Avalon

1 Answer

Rear wheel/brake noise


first check condition of discs and pads if all is good drive and pull up handbrake slowly to see if its the handbrake shoes making the noise if still a problem will most probably be rear wheel bearings

Jul 01, 2008 | 2004 Saturn VUE

Not finding what you are looking for?
1999 Ford Taurus Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...