Question about 2008 Hyundai Elantra

1 Answer

How to remove brake bulbs

Brake lights out on 2008 hyndia elantra fuse is good. Need to know how bulbs come out

Posted by on

  • silver top May 11, 2010

    hi from uk are you saying all the brake lights are not working ?? if so may i suggest your problem may not be bulbs ? but the actual brake light switch not operating correctly? either stuck plunger in off position ? or the switch is defective these do fail/burn contacts due to constantly holding pedal down instead of using parking brake if held up for long periods in traffic easy diy to check/renew however if you verify the above as to which bulb/s not working can offer more info/advice

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

There are three mounting nuts on each lens assy which are accessed from the trunk behind the liner.

how to remove brake bulbs - e5045b4.jpg

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 hyundai elantra brake lights not coming on checked fuse is good bulbs look good what could it be


Have you tested or replaced your brake light switch at the brake light petal?
Best regards,
Ck
Please provide feedback

Oct 01, 2011 | 2001 Hyundai Elantra

1 Answer

When I press the brake pedal only the left brake light comes on. The bulbs are good and the fuses are all good. Replace the right light modual but still no help. this is on a 2008 Dodge Nitro


How do you know the bulb is good? Even if it uses the same bulb as the tail light it is always a different filiment. But if you tried replacing the bulb and the fuse than it has to be the wiring. If it's a 2008 it should be covered by the warranty, I would bring it into the dealer.

Aug 17, 2011 | 2008 Dodge Nitro

1 Answer

All three brake lights are out. i think it may be a fuse but i don't know how to change them.


before you change fuse check your bulbs ,inside the fuse panel is a little tool that looks like tweezers the panel should have a diagram of which fuse is which good luck

Mar 18, 2011 | 2008 Hyundai Elantra

2 Answers

Need to know which fuse control my brake lights. Light bulbs are fine but when i press the brakes the lights dont come on.


change the brake light fuses on ur chrysler 300. also get it checked at a dealer to spot any other issue, if any.

Dec 22, 2010 | 2008 Chrysler Aspen

2 Answers

My brake lights are not working on my 2008 Hyundai Elantra.


Check fuses, bulbs, wires and brake switch (back side peddal).

Keep us updated.

Dec 22, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

No brake lights and the fuse is good


remove wires from switch and bridge them , and check if brake lights come on, if so switch is faulty ( assuming bulbs are ok)

May 27, 2010 | 2004 Hyundai Elantra

1 Answer

2002 Hyundai Elantra Brake Light Problem? This is a Girl thing, I am so car stupid!!! I have a 2002 Hyundai Elantra. Both brake lights are not working (but the brake light in the rear window does). I have...


Did you replace the correct lights? are you positive they were the brake lights? There is a little tester you can buy that you pust against the fuse if it is good a light on the tester lights up green. You can get them at almost any automotive store.

Mar 16, 2010 | Hyundai Motor 2002 Elantra

1 Answer

My 06 Elantra's brake lights won't come on. Bulbs


The brake sensor switch is located on the brake pedal. If fuses and bulbs are ok it should be the switch.

Jul 09, 2009 | 2006 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...