Question about 2007 Scion tC Coupe

2 Answers

2005 Toyota Corrolla Reset Maint Req'd light

Reset Maint Reqd kight on 2005 Toyota Corrolla

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Make sure your odometer is not on trip, shut your car off, hold down the trip reset button on your gauges, and turn the key to the on position, not start. hold it till the little dashes stop blinking where the mileage usually is, and thats it

Posted on May 16, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Resetting Maintenance Required/srs/airbag/brake and oil lights
The following website will provide you with FREE video instructions on
resetting your maintenance required light as well as srs/airbag/brake
and oil lights. I always use this site because the instructions are easy
and to the point. The site also has great info on where to purchase
used oe new parts with discounted prices as well as much more.
Check out www.vehix411.com

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

2 Answers

I has toyota Tacoma 2006 4x4 , the problem my truck is the light maint req shown up , in the manual book say oil change , i did but that light still there , Can you give me the tip for that , i 'm...


1) Turn your key to the on position (dash lights will come on)
2) Push the odometer button until the total miles are displayed and keep holding it.
3) Turn the key Off, and then back ON while holding the odometer button in.Don't let up on the button. You will notice the odometer reading shows dashes and they will sequence off. After they sequence off, the Maint Reqd light will go off. Release the odometer button

Mar 05, 2011 | 2006 Toyota Tacoma

1 Answer

How to get Maint Req off screen on a 2005 toyota highlander?


Turn ignition to "ACC" and press the odometer button until the display reads actual mileage (not Trip A or B).
Turn ignition off.
Hold the same button down that you used in step 1.
While holding the button, turn ignition to 'ON'.
The 'Maint Reqd' light should blink and go out.
Done!

Jul 11, 2010 | 2005 Toyota Highlander

1 Answer

Main reop light in dash


Hello, and welcome to FixYa.

The 'Maint Reqd' light indicates that you are due for an oil change. It will blink 4,500 miles since the light was reset at your last oil change, and stay on steady after 5,000 miles.

If you recently had an oil change, all you need to do is reset your maintenance reqd lamp. The procedure is here on this site inthe 'tips and tricks' section, and it is also in your owner's manual.

Feb 22, 2010 | 2004 Toyota Camry

1 Answer

TOYOTA SIENNA MAINT REQD LITE CAME ON AFTER SCHEDULE MAINTANANCE


If the dealer/mechanic did the service early the light will come on when service is DUE. Go back to him and have it turned off. Search the web someone may have the procedure posted. Usually simple. Google "Toyota service light reset" or "Toyota Maintence light reset" Try this one
  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Feb 05, 2010 | 2004 Toyota Sienna

1 Answer

How to reset maint req lite on a 2005 sienna


Reset the "MAINT REQD" Light on Toyota Sienna:
  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Hope helped with this (remember rated this help) Good luck.

Nov 18, 2009 | 2006 Toyota Sienna

4 Answers

2005 toyota corolla ce maint. required need to know how to reset.


To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.

Jun 12, 2009 | 2005 Toyota Corolla

2 Answers

Reset my maint reqd light


watch this free video instructions on how to reset your maint reqd light if video dosent work go to www.vehix411.com

May 06, 2009 | 2005 Toyota Corolla

2 Answers

Why does the "Maint Reqd" light turn on in a 2009 Toyota Matrix?


you need to hold down the reset button with one hand while you turn the key on, you will see the 5 lines count down

May 01, 2009 | Toyota Matrix Cars & Trucks

3 Answers

"maint reqd".


That is for oil changes. It come on when the oil change is due.
When you have your oil change done, the lube tech should reset the this light every time.
If you need help resetting the light, let me know.

Apr 02, 2009 | 2005 Toyota Corolla

Not finding what you are looking for?
2007 Scion tC Coupe Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15628 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...