Question about 2007 Chevrolet Equinox LS New Cars

2 Answers

My battery is dead. The doors are locked so the

My battery is dead. The doors are locked so the remote unlock doesn't work. I don't have an extra key - how can I open the hood, not having access to the latch release, in order to jump start my car?

Posted by on

  • Anonymous Mar 17, 2014

    How can you access the trunk of a Ford tbird 2002 when the battery i dead? The key fob and door release do not work when the battery is dead

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

Where are your ignition key.most of the time the ignition key opens the car if the remote stop working ..if your keys lock inside. vechicle .you got to call a lock smith.or go to dealership give them your car serial number.

Posted on May 16, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 34 Answers

Slim jim or call tow truck or locksmith

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2006 Chrysler 300/ the auto lock button on my key remote doesn't lock or unlock doors?


how do I reset one of two keys that the unlock,lock,trunck does't work but the key turns the engine over.

Oct 08, 2012 | 2006 Chrysler 300

2 Answers

1999 Jetta GLS - Key buttons stopped working - no longer could lock/unlock doors remotely. Using key manually worked for a while. Now key can be inserted into driver door (only exterior door lock) but...


Have you replaced the battery lately? If so , you could have a bad battery in your key. It is a small microchip in some cares and will effect unlocking and starting the car if the battery is weak or dead.

Jul 31, 2012 | Volkswagen Jetta Cars & Trucks

2 Answers

I have a 2007 Toyota RAV 4 I can't get the remote to work after changing the battery does it have to be reset if so what has to be done. I can lock and unlock the doors manualy but not with the remote...


1. get in the car
2. shut the door
3. place the key in the ignition
4. lock the doors, manually
5. turn the ignition to on then off...do this seven times
6. unlock the doors and try your remote

Sep 20, 2011 | 2006 Toyota RAV4

2 Answers

How do I get my key remote to lock/unlock my toyota rav4 2002 model? I changed the battery because I thought that was the problem but it is still not working. The red light on the remote comes on but then...


You will need to try reprogramming the remote 1st, below is the complete procedure. If the reprogram doesn't restore function then you will need the dealer to test the keyless entry system, you may have a bad module or remote (only applies if both remotes don't work).

Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Aug 24, 2011 | 2002 Toyota RAV4

1 Answer

I left my trunk door open all night and my battery died. I thought the key I use for the ignition would be the same key to unlock the door if the battery died? How do I enter my 2006 Dodge stratus with the...


Hi,

Thank you for contacting fixya.com.

The key lock/unlock for doors are powered by the batteries in the remote, while the ignition key draws its energy from the vehicle via induction. Since the battery is dead you are having this problem. You need to call assistance from the nearby auto shop or a locksmith. I guess you don't have any other option.

Jun 27, 2011 | 2006 Dodge Stratus

2 Answers

Must use the key to open the door. Once it has been unlocked, the remote will work to lock and unlock the doors. After a short period of time the remotes will not work again and must use the key again to...


Hi and welcome to FixYa!

Looks like that you have a faulty door lock actuator that's why it's not responding with the remote. If the actuator is faulty it tends to trip, sometimes will open sometimes won't. Using the key will surely lift the locks upward and by then the actuator can work again.

Have the door lock actuator replaced and you'll be good.

Hope this helps and thank you for using FixYa! Have a good one!

Jan 26, 2011 | Chevrolet Avalanche Cars & Trucks

1 Answer

I think my key remote is dead and my key won't open the door. what can i do?


put a new battery in remote,try key in other door," are you sure the car battery is not dead," !!!! If it is then remote wont work, if you are locked out of car call wrecker or lock smith and they can slim jim the door to get you inside. then unlock doors USING THE POWER LOCK button PROVIDING CAR BATTERY IS NOT DEAD!!!!

Jan 14, 2011 | 1999 Lincoln Continental

1 Answer

Key locked in 2001 pontiac grand prix battery is


lock smith or someone authorized to use a slimjim[can do more damage if dont know how to use ]--or-- key fob wont work if vehicle battery dead if u can reach up under car at front and release hood latch then jump battery and then use key fob to unlock door

Feb 20, 2010 | 2001 Pontiac Grand Prix

2 Answers

Won't start - no sounds - even door locks don't work


Easy step
Have the battery check if it's no good replaceit. The key remote will not work if you have a dead battery.

Mar 25, 2009 | 2001 BMW 5 Series

Not finding what you are looking for?
2007 Chevrolet Equinox LS New Cars Logo

847 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...