Question about 1991 Chevrolet C1500

1 Answer

Location of the dimmer switch on a 91 chevy silverado cus my low beam headlights are not workin

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The turn signle lever, in the columb tricky to do , it was about 160 for a columb repair shop to do
there are some relays under the hood on the fire wall passenger side. mine has what the relays are under the relay cover it looks like a big T see if it clicks when you pull on the turn siginal lever a relay may be the problem

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't lights work?


Both the headlight switch and the BCM provide a ground, or control circuit, to the headlight relay coil circuit for manual or automatic headlamp operation. When you place the headlamp switch in the OFF position, and the ambient light sensor indicates low light conditions, the BCM energizes the headlamp relay for low beam operation. You may switch the headlights to high beam by pulling the dimmer switch handle toward you until the dimmer switch is activated. When the dimmer switch is placed in the HIGH position, the indicator lamp input to the BCM is pulled low. The BCM then sends a class 2 message to the instrument cluster in order to illuminate the high beam indicator lamp.
Low and High Beams Headlamps Inoperative ?
Replace the headlamp switch. Refer to Headlamp Switch Replacement .
Did you check the headlamp relay ? Location ,left instrument panel
Did

Nov 11, 2015 | 2001 Chevrolet Monte Carlo

1 Answer

1997 chevy 1500 headlights will not turn on


Do you have hi beams or low beams if either one works and others don't check the relays for either high or low they are the same number you can switch them to see if a relay is bad

Jun 24, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

Low beams not working but high beams are on a 2000 chevy metro


The headlight relay provides power to the dimmer relay, then power goes thru a fuse for each light for each circuit (4). The low beam fuses are in fuse block 2. The dimmer relay is controlled by the daytime running light module. The headlight and dimmer switches send signals to the DRL module. You may need a shop manual to troubleshoot the circuits.

Jan 24, 2014 | 2000 Chevrolet Metro

2 Answers

2001 suburban


Well the high and low beam lamps use the same fuses, and the dimmer switch handles the ground circuit. So I would check the dimmer switch if both high beam bulbs are ok.

Jul 23, 2013 | Cars & Trucks

1 Answer

My 2001 chevy silverado's low beams don't work. I


The wiring for the low beams would run not to the ignition, but to the dimmer switch. I don't know what color they are, but sounds like you are at the source of the problem, if the low beams quit when the column is let down. Pull the trim pieces off the steering column and examine the wires going to the dimmer switch. You may see some wiring insulation scraped off. It could be a bad dimmer switch, but check the wiring first.
Good luck.

May 03, 2012 | 2001 Chevrolet Silverado 1500

1 Answer

Low beam headlights not working on my 2001 chevy silverado. goes to high beams automatically.


your dimmer switch is at fault. Its location is on the sheering coluum shaft behind the dash in front of the firewall by the brake pedal area

Mar 13, 2010 | 2000 Chevrolet Silverado

1 Answer

Daytime running lights and low beam lights not workin, fuse is fine. Replaced relay lights still don't work.


I just worked on a Pontiac Sunfire on a light issue. The driving lights are on a separate switch on a 2003 from the dimmer switch. Have you checked to make sure both low beam light bulbs for your headlights are not burnt out on low beam? Have you checked to make sure you have power to the low beam where the connector connects onto the bulb?

Dec 09, 2009 | 1998 Pontiac Sunfire

2 Answers

1993 Chevy Silverado truck headlights high beam only works no low


dimmer switch has gone bad need to change your dimmerswitch

Apr 01, 2009 | 1993 Chevrolet K1500

3 Answers

Fuse diagram for 91 chevy corsica


Need copy of wiring schematic for 1991 chevy corsica

Dec 10, 2008 | 1991 Chevrolet Corsica

Not finding what you are looking for?
1991 Chevrolet C1500 Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...