Question about 1993 Mercury Cougar

1 Answer

I lost my keys and i need to know how to replace my key cylinder on my 1993 mercury cougar xr7. I have a new one.

Posted by on

  • Jimmy Hall
    Jimmy Hall May 11, 2010

    nathantate:

    Are you near a public library? The system here carries the Chilton repair manual for this car. It gives step-by-step instructions on how do the swap. That would be your least expensive option. Buying the manual at an auto parts store would be the best if you plan on keeping the car & performing additional maintenance in the future.


×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Remove screws from steering colum and remove cover,
you will need a drill, needle nose plyers and a very small screw driver phillips.

step one. drill 1" into cylinder.

located on bottom of colum is a small hole with a pin in it.

step 2, push pin up, if it does not move drill 1/2" more in to cylinder.

stop if you reach a small shaft that is kinda loose and has a brass washer or steel washer on the outside of it. remove small shaft with plyers. once the cylinder is drilled it should unlock, turn it and push the pin up untill it comes out

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank sensor for a 1993 Mercury cougar xr7?


Clicking is the starter solenoid

You have a battery,cable or starter problem

The crank sensor is only for #1 cylinder recognition

If you have spark or injector pulse, you assume it is okey

Check for spark,injector pulse,fuel pressure

The starter should continue to turn over the
motor until you let go of the key

Mar 01, 2013 | Mercury Cougar Cars & Trucks

1 Answer

Where is the number 4 cylinder on a 1996 mercury cougar xr7 3.8


Cylinder 4 should be next to the radiator on the driver side.
1-2-3 are on the passenger side.

Jan 26, 2013 | 1996 Mercury Cougar XR7

1 Answer

Where is the key latch located inside the door panel of a 1997 mercury cougar xr7


make you a loop on one end and see if you can get it through and slip the loop over the door handle and give it a pull.

Dec 20, 2012 | 1997 Mercury Cougar XR7

1 Answer

My 1996 mercury cougar xr7 4.6 liter engine begins to shudder when accelerating reaches 30 mphfault codes read 1717 and 174


Sounds like it maybe a weak fuel pump.Check your fuel pressure it should be 30-45 psi with key on and engine off.If not within specs replace pump and filter.

Nov 01, 2011 | 1997 Mercury Cougar XR7

1 Answer

My only key broke off in the door How can I get


if you can get the stub out anykey shop can help you otherwise ford sell a door lock package, hot hard to replace

Apr 21, 2010 | 1996 Mercury Cougar XR7

1 Answer

Do ou have a diagram for the brake lines on a 1991 mercury cougar


YOU WILL NEED TO GET A NEW BRAKE LINE MADE FOR YOUR WHEEL CYLINDER THIS WILL HAVE A THREDED NUT WHICH WILL FIT INTO A HOLE IN THE WHEEL CYLINDER, IF THE BRAKE IS AT THE MASTER CYLINDER YOU WILL STILL NEED A NEW ONE MADE FOR THIS , GO TO A MOTOR SHOP WITH YEAR OF CAR AND GET A NEW ONE , OR GO TO A CAR BREAKERS YARD FOR USED ONE .

Oct 20, 2009 | 1991 Mercury Cougar

1 Answer

Location or diagram of pump relay switch


The Constant Control Relay Module (CCRM) is in the right hand front of engine compartment, mounted to upper radiator support.
62516862

Jun 07, 2009 | 1997 Mercury Cougar XR7

4 Answers

Ignition key needed for 1997 cougar


call a dealer anyway and double check..you may still be able to get a key made for it.

Jan 21, 2009 | 1997 Mercury Cougar XR7

Not finding what you are looking for?
1993 Mercury Cougar Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...