Question about 2000 Ford Explorer

3 Answers

Timing belt is it true that the 2000 ford explorer 4,0 engines has 2 timing belt on them; its a 6 cyl. thank you godbless

Posted by on

  • wmhernandez May 17, 2009

    hi askjhuber, joecoolvette, and shotta1; many thanks to you all for the information. 
    stay well and godbless you all

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,660 Answers

The 2000 Ford Explorer that has the 4.0 Liter engine, is an SOHC engine. Single OverHead Camshaft.
It has one camshaft sprocket, one camshaft chain, and one crankshaft sprocket.

The 2000 Ford Explorer that has the 4.6 Liter engine, is a DOHC engine. Dual OverHead Camshaft.
Two camshafts require two camshaft sprockets, and two camshaft chains. One cranshaft sprocket with two rows of teeth.

No sir, it is not true of the 2000 Ford 4.0 engine.

Posted on May 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Absolutely NOT TRUE this vehicle has a timing chain, NOT a timing belt. It has a serpentine belt. Thanks for using FIX YA

Posted on May 16, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Some may look to have 2 But they only have 1. On the 2000 for explorer its a chain instead of a belt. I wish they where belts beacuse then there would be no vibrations.
www.advanceauto.com also has diagrams of this if you are looking for them.
Good luck

Posted on May 16, 2009

  • James Huber
    James Huber May 16, 2009

    i thought i hit the nail on the head sorry for not answering the question good enuf

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which is bank 2 for the o2 sensor for post cat?


HiI!!
6 cyl. and 8 cyl. engines are divided into 2 Banks, standing in front of the Engine, the Bank 1 is the side where the #1 spark plug is (on V6 Ford Engines is on the PASSENGER SIDE). Bank 2 is on the DRIVERS SIDE.
Check the following diagram for HO2 sensor locations (This diagram applies to Ranger, Explorer and Mountaineer models) :
1kbron_121.gif


2 would be Bank 1 and 2A would be Bank 2.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Feb 15, 2011 | 1998 Ford Explorer

2 Answers

2000 ford mustang code 453 and missfire cyl 5 where is the cyl


a haynes manual from a parts place will show you--or chec the condition of each plug wire-if one looks bad or falls apart--probly need to get all new wires /plugs

Dec 18, 2010 | 2000 Ford Mustang

1 Answer

How many quarts of transmission fluid goes in a 2000 ford explorer /


Hello there
abar_a.gif?v=72006
2000 FORD TRUCKS EXPLORER 5.0L 8-cyl Engine Code P

FILTERS
AMSOIL Ea Oil Filter.........EAO11
Wix Oil Filter.........51372
AMSOIL Ea Air Filter.........EAA122
Wix Air Filter.........46253
Wix Fuel Filter.......33595
Wix Trans Filter.....58955 [1]

[1] 4R70W

CAPACITIES
Engine, with filter..........5.0 quarts[1]
Cooling System, Initial Fill..........15.0 quarts
Automatic Transmission, Others Initial Fill..........3.9 quarts[2]
Automatic Transmission, 4R70W Initial Fill..........5.0 quarts[2]
Automatic Transmission, Total Fill
4R70W..........14.0 quarts
2wd ..........10.0 quarts
4wd ..........10.0 quarts
Manual Transmission, ..........5.5 pints
Differential, Rear..........5.7 pints[3]
Differential, Dana 35 Front..........3.6 pints[4]
Transfer Case,Full-Time 4WD..........2.7 pints

1. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
2. With ENG at operating temperature, shift through all gears. Check fluid level in PARK and add fluid as needed.
3. Fill to no more than 1/4 to 9/16" below fill plug hole.
4. Fill no higher than 9.5 mm or 3/8" below fill plug.


Aug 07, 2010 | 2006 Ford Explorer

1 Answer

Need firing order for coil pack, 1994 ford explorer,4.0


V8 or V6

Cyl 1 thru3 or 4 ---front to back --pass side

Cyl 4 thru 6 --or 5 thru 8 in case of V8 --driver side

V6 1-4-2-5-3-6

V8 1-3-7-2-6-5-4-8

Mar 12, 2010 | 1994 Ford Explorer Limited

4 Answers

How much oil do i put in a 1999 ford explorer when i change


1999 FORD TRUCKS EXPLORER 4.0L 6-cyl Engine Code [E] SOHC
Engine Oil Grade 1......API* All TEMPS......5W-30 Engine, with filter..........4.7 liters
1999 FORD TRUCKS EXPLORER 5.0L 8-cyl Engine Code [P]
Engine Oil Grade 1......API* All TEMPS......5W-30, 5W-20 approved for this application per Ford TSB 02-1-9 Engine, with filter..........4.7 liters
Here's the information your looking for and thank you for using Fixya





Mar 10, 2010 | 1999 Ford Explorer

2 Answers

How do you set the timing on a Plymouth Voyager ? I have to repace a broken timing belt. I was also told to replace the water pump is that true.


It is recommended because if you have to change the water pump belt change since you have to remove it and you save work in the future as we recommend changing the camshaft seals and crankshaft as it saves time and money

Feb 03, 2010 | 1992 Plymouth Voyager

1 Answer

NEED DIAGRAM ON HOW TO REPLACE THE SERPENTINE BELT ON A 2000 FORD ESCORT 6-CYL.


I don't believe Ford offered a 6 cylinder for the Escort in 2000. The engine is more than likely a 2.0L 4 cylinder. There were three engines for that year. Follow this link to see the diagrams you ask for. Choose the engine you have and click on the camera icon to see the correct diagram.

http://www.gates.com/part_locator/index.cfm?location_id=3598

Jan 19, 2010 | 2000 Ford Escort

1 Answer

2000 ford contour 4 cyl.


If the car had no real power loss problems before have the ting belt replaced ,than it is most definitely out of time.

Apr 21, 2009 | 2000 Ford Contour

3 Answers

What is estimated average cost for timing belt replacement ?


should cost less than $100 at a FORD DEALER. mine cost $65 four years ago.

Apr 03, 2009 | 2000 Ford Explorer

1 Answer

Need to change idler pulley on a 95 explorer


it's metric. Do you have 2.3L 4 cylinder, 3.0L 6 cyl or 4.0L 6 cyl?

Drive Belt Tensioner, Automatic Removal and Installation
  1. Remove drive belt (8620) as described in this section.
  1. Remove drive belt tensioner retainer bolt and drive belt tensioner (6B209) .
  1. To install, reverse removal procedure. Tighten drive belt tensioner retainer bolt to 83 Nm (62 lb-ft).

Mar 03, 2009 | 1995 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...