Question about 1997 Plymouth Breeze

2 Answers

RUN RUFF NOW KNOCKS

MY BROTHER RAN HIS 97 BREEZE WITH THE 2.0 THROUGH WATER TODAY HE HAS CHANGED THE OIL PLUG WIRES PLUG IT RUNS BUT VERY ROUGH AND NOW KNOCKS AND IT THROWS A CODE WITH 18 LIGHT FLASHES HE SAID

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Sounds like he hydrolocked it and bent a connecting rod.

Posted on May 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Anybody with a cirrus, stratus or breeze if its runs rough, dies at idle and generally runs like crap, take out and thoroughly clean the egr valve (or replace it) after 4 months and money and time wasted, I cleaned mine and presto, runs perfect. Sure I had lots of codes coming up but, the problem was egr, the codes that were coming up were caused by the egr valve, and that code never came up, so it was a
crap shoot..so it\'s it stalls out and runs like described clean the egr valve, save your money. ... I\'m know this will help alot of owners of these cats described. .. your welcome

Posted on Jun 09, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 pt crusier sputter sometimes. No check engine light on,but riding ruff now


Check spark plugs and plug wires.
Have you changed the fuel filter lately? Dirty air filter will make it run rough. These are possibilitys only.

Dec 10, 2014 | 2003 Chrysler PT Cruiser

1 Answer

97 ford explorer limited changed fuel pump and filter and preasure relelay valve car still having starting issues can start cold and drive 20 mins and shut car of and it well have a hard time starting and...


I have a 98 explorer and had a similar problem. It wound up being bad spark plug wires. So I changed them and the spark plugs while I was at it. It ran great and still does. I'm not sure if that's your problem I would need more information.

Aug 27, 2013 | 1996 Ford Explorer

1 Answer

Runs rough dies


change the fuel filter and check the fuel pressure

May 25, 2013 | Ford Expedition Cars & Trucks

1 Answer

99 grand am when starting i hold accelerator down 1/8 of an inch well start ideal is very ruff


Your PSI is good on fuel. Not a pump problem. You should check vacuum to see if you have any issues there. Could be a number of sensor issues as well.

Feb 20, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

Engine wont run properly after changeing plugs/oil/oilfilter/air filter. the engine lite stays on,it wants to die,runs rough,possibly not fireing on all cylinders,its getting hot,it has water in the...


check to make sure that the plug wires are in the correct order if so check the wires to make sure that they are not fouling out if you didnt replace them with the tune up id suggest that you try that.

May 21, 2010 | 2001 Ford Focus

2 Answers

Runs ruff changed mass air flow plug wires plugs


check for vacuum leaks, check distributor cap and rotor button, clean or replace as necessary. Use quality injector cleaner.

Feb 18, 2010 | 1993 Lincoln Mark VIII

2 Answers

I have a 2000 impala with the 3.4 and 160,000 miles on it. The other day white smoke started pouring out of the exhaust and the #6 cylinder was not firing. I changed the head gaskets, upper and lower...


double check your firing order and make sure all wires and hoses are plugged in good. when you pulled the push rods out did you make sure they went back exactly where they came out because there are 2 different lengths.

Oct 22, 2009 | 2000 Chevrolet Impala

2 Answers

Engine runs ruff


you may have a valve or valves leaking which will cause it to run rough, have a leak down test done or a compression test

Jun 22, 2009 | 1994 Volvo 940

2 Answers

Engine running rough at all times


sound like you cam to crank timing is off. if it was running ok before the repair double check the repair

Apr 13, 2009 | 1996 Plymouth Breeze

2 Answers

2002 Ford Focus 2.0l SOHC running on 3 cylinders


I had this problem too exept I have no clue what parts or blah b;ah blah. I just know that my coil pack was getting fried.burnt out because my wires were bad. The mechanic I went to was a moron because I took the car to him 3 times and he kept saying it was the coil ad kept replacing it. I took it to my uncle and he said my wires were in horrible shape and when this is the problem it fries your coil making your car run like a lawn mower! Well all i did was replace my wires and the car ran great! Well I hope this helped..

Jan 13, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
1997 Plymouth Breeze Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...