Question about 1998 Ford Crown Victoria

1 Answer

1999 crown vic keeps getting air locked at the fuel rail?

1999 crown vic patrol car has air at fuel rail. bleed it out, it will run for a bit, but gets air locked again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Check your fuel pressure
if you dont have enough pressure this will happen
when the fuel pressure is good the system will just push the air out through the injectors or the fuel return line

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 crown vic 5.0 EFI will not start. Has working fuel pump and will run with starting fluid but will not start. What is the problem?


there is definately a fuel problem, not getting to engine. check fuel rail for fuel with key in the on position, then check power for fuel injectors, (fuses)

Mar 02, 2011 | 1986 Ford Crown Victoria

1 Answer

Where is the gas filter for this 1999 ford crown vic located


If it is fuel injected, the fuel filter is located under the car, on the inside of the right frame rail, under the drivers seat.

May 01, 2010 | 1999 Ford Crown Victoria

1 Answer

Replace fuel injector on a 1989 ford crown vic.


they are pressure fit in place. and they are pried out
on the 4.6 litre. if you want to bleed off the fuel pressure,on the fuel rail is a clip that is moved first,and then the fuel line can be disconnected.be careful,the spray is under pressure.cover it with a rag

Mar 21, 2010 | 1989 Ford Crown Victoria

1 Answer

1999 ford crown vic with ignition coils going bad a lot.


have look at ur wires that is caming from the car in to the coil it self

Mar 10, 2010 | 1999 Ford Crown Victoria

2 Answers

How to drop fuel tank


purge the pressure at the fuel rail on the engine to relieve the pressure.remove the two bolts near the rear axle at the gas tank straps,lower slowly and unplug the lines and sender wires.that simple.

Oct 31, 2009 | 1999 Ford Crown Victoria

1 Answer

1999 FORD CROWN VIC. 4.6 - PROBLEM, NOISE


This is caused by the IAC valve. Over time the valve becomes gummy and inoperative. Get it replaced and the problem is solved. IAC stands for idle air control, hence the stalling concern.

Oct 17, 2009 | 1999 Ford Crown Victoria

1 Answer

I have been fighting a no start issue on my 00 crown vic.


I hope you have replaced the fuel filter. Every 30000. I took the one off my moms Vic.and we could not blow through it.
I hope this helps you.

Oct 06, 2009 | 2000 Ford Crown Victoria

1 Answer

Locate fuel filter on 91 crown vic


The fuel filter is located under the vehicle on the inner side of the left (driver side) frame rail.

Should look like the image below:
a31eb6c.jpg

Apr 13, 2009 | 2008 Ford Crown Victoria

1 Answer

Crown Vic will turn over but not start


first do you hear your fuel pump running? if you don't more then likely the relay may have went bad. second check your connection to your coil's..make sure there clean and tight..and getting back to the fuel problem if you hear your pump running then it could be the fuel filter clog...try this and let me know....

Oct 13, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1998 Ford Crown Victoria Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...