Question about 1994 Ford F350 Crew Cab

2 Answers

1988 Ford F350 engine turns but wont start

My F350 ran perfectly all morning, but when I went to take it out in the evening it started then shut off on its own. I don't think its the battery cause its turning. It just wont start. What do you think it is?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a similar problem. My truck would start fine until it sat after running a while and I shut it off for ten minutes or so.The engine heat heat would rise to the deisel fuel injection pump and the truck would whirl over when I tried to start it, but it would not fire. There is a spring in the fuel shutoff on the injection pump that expands with heat and, as it gets older, sticks so that the solenoid doesn't open. I found that a small amount of cool water poured on the pump would cool it enough to start.

Posted on Mar 07, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

Check the fuel pump relay,its 1 or the other on the LEFT side next to the fender,there should be 3 side by side...i think its the geen relay but not sure..or its the brown one,,tap on them with a screwdriver handle,and see if it starts,replace with a new relay

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck want start fills like there's air in the line.


1988 F350 NO CRANK NO START - YouTube

? 8:10
https://www.youtube.com/watch?v=SRKTLUJGK0A
May 3, 2013 - Uploaded by DUSTINSMOBILE WRENCH
... a New Ford F-350 Truck on a Trailer - Duration: 0:31. by Belt Liner 2,323,434 views. 0:31. 92-2014 Ford F-150 250 350 Expedition won't start ...

1986 Ford F350 won't start - YouTube

? 1:01
https://www.youtube.com/watch?v=ADUc1UHVhkM
Oct 13, 2013 - Uploaded by Tristen Perry
Hello people on YouTube. I have a 86 F350 that won't start up. It has a brand new solenoid in it. The truck ...

88 F-350 with EFI 460 Starting/Running Problems - Ford F ...

fordfzone.com > Technical Support > 80-96 Ford Truck Tech Support

Jan 26, 2007 - 11 posts - ‎8 authors
Will not re-start, seems to be flooding at this point. ... I have a 1988 Ford F-350 with an EFI 460 engine. ... run a couple of seconds, shut off if you didn't start the truck. they now run all the time when the key is in the on position.

Jan 05, 2016 | 1988 Ford F 350

1 Answer

My ford e450 v10 will not start when the temperature is below 50 degrees. Engine turns over fine but will not fire. It is gas, not diesel.


Re: 2001 V10 FUEL , MY TRUCK WONT START AND WHEN IT DID...
Yesterday I found the negative cable had fell out of the post terminal. fixed that jumped the battery and got it to start. ran for a while, then shut if off and started again this shortly after. started fine. woke up this morning to the same problem. tried to jump. interior light won't even illuminate with jumper cables hooked up

Oct 19, 2015 | Ford Cars & Trucks

1 Answer

Start not starting


it sounds like a fuel pump .remove the fuel inspection cap on the fuel rail at the top of the engine and make a pump presser check,must be around 45-65 psi, anything lower means a defected pump.another way
of checking a pump is banging on the fuel tank while having some body cranking the eng. if the eng fires up it means it is a pump.

Jan 07, 2014 | 1995 Dodge Ram 3500

1 Answer

Diagram ford f350 turbo diesel fuel system


I would start there way to much pressure at separator check fuel pressure you may want tto try a good additive seems like there is alot of condensation

Oct 14, 2017 | Ford Cars & Trucks

1 Answer

1988 Ford F350 460,fuel injected, Wont start,,, Coil only sends spark once per revolution of the rotor


Hello Donn,

UN-fortunately 1988 is WELL before the OBD
(on board diagnostic)... DIAGNOSTIC TROUBLE
Codes (DTC) got standardized...

So DAYS can be wasted looking for commonality...
(troubles).

Rather than assuming your spark, timing, fuel, ECU...
Oxygen Sensors. INJECTORS are all askew...

I would suggest that if you SATURATED YOUR
HEADER BOLTS with LIQUID WRENCH...

and opened you EXHAUST ahead of your catalytic
converters... ahead of your mufflers... you engine would run...

Obviously DANGEROUS to operate in that condition... at
least you would know what had to be REPLACED before
you can operate your vehicle SAFELY.

If you decide the job is a bit too much... at least
check out your PURCHASE cost of a replacement
CAT and/or MUFFLER...

Try rockauto
http://www.rockauto.com/en/catalog/ford,1988,f-350,7.5l+460cid+v8,1126437,exhaust+&+emission

1988 FORD 350 7 5L 460cid V8 Catalytic Converter RockAuto

1988 FORD 350 7 5L 460cid V8 Muffler RockAuto

Mar 16, 2017 | Cars & Trucks

1 Answer

I have a 1988 ford f350 cranks but won't start


Move over there's a fat guy here to help you now you must go to fordowners.com register for free then search for your owners manual you can download it for free then go to roadside emergencies and look for your fuse box diagram there will be the fuse location for the fuel injection and there's a relay for them to I believe

Apr 24, 2017 | 1994 Ford F350 Crew Cab

1 Answer

97 F350 7.3 diesel. Trouble with idle, (installed cam sensor) Started and ran perfect. When engine was shut off and restarted the engine would die. (code p470). The exhaust back pressure relief Sensor...


The exhaust back pressure relief Sensor is taking out the idle computer ?????? A wiring diagram isn't going to help , you need a diagnostic flow chart or as ford calls it , pinpoint tests for that DTC . Your best bet , take your vehicle to a qualified diesel tech .

Feb 01, 2018 | 1997 Ford F350 Crew Cab

1 Answer

Wont start have to pull start


i have a 1994 f350 diesel 4x4 the engine wont start

May 12, 2010 | 1994 Ford F350 Crew Cab

1 Answer

1999 f350 diesel engine shut down, turns over but


that fuse powers pcm fuel heater and some other things. when the fuse blows the pcm shuts down. causing it to not run. usually its the heater that is bad. it is located at the back driver side by the fuel pump. you can unplug it and see if it starts. if so you will need to replace the heater

Jan 06, 2010 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
1994 Ford F350 Crew Cab Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5608 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...