Question about 2002 Renault Sportwagon

2 Answers

Does any one know how to remove the steering wheel cover to tighten the steering wheel on a 2002 renault traffic van ?

Posted by on

  • andybm3 May 16, 2009

    hi , i've sorted it now. it doesn't have any srews just a hole at the back . push a screwdriver in to compress a spring an then pull downwards to remove it . regards Andy

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 214 Answers

It depends upon the model. but most of all, just in the back of the stearing wheel there will be two screw..........with a help of scerw driver just open it...........have a nice day!

Posted on May 15, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

If it has an air bag fitted in it, it will have 2 or more small bolts / screws in it from the back of the wheel if its not an airbag wheel it just pulls off.

hope this has been of help Regards John

Posted on May 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the steering wheel of Renault megan 2004


Undo the centre cover screws,s or push down and a 1/4 turn, if it has an air bag pull the fuse for it out undo the centre nut to half way rock the steering from side so side really hard they usually come off other way is the correct puller ,mark the wheel to shaft to go back inthe right place

Dec 09, 2015 | Renault Cars & Trucks

2 Answers

How to remove the ignition lock cylinder from a 93 geo storm


is the lock assembly in the car or out?
there are 2 jobs here, removing the assembly
and after that, attacking the lock it self.???????

any lock smith can rebuild the lock, proper
it has pins that are pressed out.
it can even be rekeyed.

the remove assembly is covered in the FSM, no books?
alldata.com covers that.
it really is an Isuzu. impulse.

my guess is its job 1, assembly out.
so toss coin lands on job1
(on most cars, steering wheel must be removed)
once that is done, its obvious from there, right? that clamp there with the antitamper screws? then must be removed. and replaced new..

a rare car , and even more one that runs....

here is the online FSM answer

  1. Remove the negative battery cable.
  2. Remove the steering wheel.
  3. Remove the combination switch assembly.
  4. Turn the key to the OFFposition, depress the retaining pin and remove the ignition lock cylinder from the switch.
  5. Disconnect the electrical connector from the ignition switch.
  6. Remove the snapring and spacer collar from the steering shaft.
  7. Disconnect the back drive cable from the ignition switch.
  8. Remove the ignition switch bolts and the ignition switch from the steering column.


now back in?
  1. Install the ignition switch to the steering column and tighten the bolts.
  2. Connect the back drive cable to the ignition switch.
  3. Install the spacer collar and the snapring to the steering shaft.
  4. Connect the electrical connector to the ignition switch.
  5. Install the lock cylinder into the switch.
  6. Install the turn signal switch screws and the turn signal switch.
  7. Install the four screws and the coil assembly to the turn signal switch.
  8. Connect the coil assembly wiring harness to the turn signal switch.
  9. Install the two piece steering column cover and the two piece steering column cover screws.
  10. Raise the steering column and install the upper steering column mounting bolts. Tighten the bolts to 18 ft. lbs. (24 Nm).
  11. Install the left lower dash trim panel and tighten the lower dash trim panel screws.
  12. Install the lap air deflector and tighten the lap air deflector screws.
  13. Install the knee pad assembly and tighten the five screws, the bolt and the nut attaching the assembly.
  14. Install the engine hood opener cable.
  15. Install the engine hood opener and tighten the two screws.
  16. Connect the electrical connector to the cigar lighter bezel and install the bezel.
  17. Connect the electrical connector to the left switch bezel and install the bezel.
  18. Install the steering wheel.
  19. Connect the negative battery terminal to the battery.

that?

Oct 08, 2014 | 1993 Geo Storm

1 Answer

How do I remove a 2002 kia rio steering wheel?


Carefully remove the bolts at the rear of the steering wheel and remove the plastic covering then you should be able to disconnect the wiring and then the steering wheel, you may need a puller assembly if the steering wheel is difficult to remove

Aug 23, 2014 | 2002 Kia Rio

1 Answer

How to remove steering wheel


Disconnect battery,,,,,,,,remove screws from back of steering wheel cover.. front of steering wheel cover will come off and may be plugged into steering wheel carefully remove wire plug from tab.remove large nut on center of steering wheel , use puller kit from local auto parts store , prob wont come off on its own but might . BEFORE removal note location of scratch on wheel , matching scratch on post for alignment of wheel on replacement ,slide steering wheel into place, tighten nut just enough, replug wire and dont make screws too tight re hook battery and reprogram radio.... sorry.. yur welcome

Jan 13, 2012 | 1997 Acura CL

1 Answer

2002 Ford Windstar - airbag code 22, safing sensor - what does that mean and how is it fixed?


Hello! The Air Bag Sliding Contact (ABSC) is more than likely faulty...See diagrams below....The removal of the ABSC is involved, I would suggest buying a repair manual before attempting repair...
Guru.....Saailer


saailer_105.gif


Item Part Number Description
1 043B13 Driver Side Air Bag Module
2 N804385-S100 Screw
3 N606676-S36 Screw
4 3L518 Steering Wheel Spoke Cover
5 14A664 Air Bag Sliding Contact
6 3600 Steering Wheel
A - Tighten to 36-46 Nm (25-34 Lb-Ft)
B - Tighten to 2-3 Nm (18-27 Lb-In)


saailer_106.gif

Aug 30, 2011 | Ford Windstar Cars & Trucks

1 Answer

How do you remove a 1987 Ford Econoline ignition switch assembly


1982-88 Models Fig. 4: Align the flexible coupling to specifications (shown)--1982-88 models 89788g36.gif
Fig. 5: Exploded view of the steering column--1982-88 models 89788g41.gif
  1. Set the parking brake.
  2. Disconnect the battery ground cable.
  3. Disconnect the flexible coupling from the steering shaft flange.
  4. Disconnect the shift linkage rod(s) from the column.
  5. Remove the steering wheel. NOTE: If you have a tilt column, the steering wheel MUST be in the full UP position when it is removed.
  6. Remove the floor cover screws at the base of the column.
  7. Remove the steering column shroud by loosening the bottom screw and placing the shift lever in the No.1 position (on automatics) and pulling the shroud up and away from the column.
  8. Remove the instrument cluster column opening cover.
  9. Remove the 2 bolts securing the column support bracket to the pedal support bracket.
  10. Disconnect the turn signal/hazard warning harness and the ignition switch harness.
  11. Lift the column from the truck. To install:
  12. Position the column in the van.
  13. Connect the wiring.
  14. Insert the column through the floor so that the flange engages the flexible coupling, then, raise the column and loosely install the bracket bolts.
  15. Loosely install the flexible coupling nuts and floor plate screws.
  16. Install the steering wheel.
  17. Adjust the steering column as follows:
    1. Tighten the flexible coupling nuts to 35 ft. lbs. (47 Nm).
    2. Place the wheels in the straight-ahead position.
    3. Verify the safety pin-to-flange cut-out clearance of 0.160 in. with a feeler gauge.
    4. If necessary, loosen the flange nuts to adjust the clearance, then retighten the nuts when clearance is established.
    5. Tighten the column support bracket bolts to 20 ft. lbs. (27 Nm).
    6. Tighten the cover plate screws to 10 ft. lbs. (13.6 Nm).
    7. Tighten the lower clamp bolt to 10 ft. lbs. (13.6 Nm).
prev.gif next.gif

Jul 08, 2010 | Ford E-350 Cars & Trucks

1 Answer

Torque setings


if it is a solid bearing do it up as tight as you can.if it is a tapered bearing do it up untill the nut is touching the bearing check the hub for play if you have got play do the nut up a bit more until the play is gone in the hub.make sure you do not over tighten the bearing or the wheel will not turn freely.the wheel needs to spin with no drag.

Jun 02, 2009 | 2003 Renault Sportwagon

3 Answers

My steering wheel on my van is loose


I think the problem you have is the steering assembly being loose.

To repair this, you must remove the steering wheel and work slowly down the column assembly, removing the indicator switch, ignition switch and other assorted springs and things. Lay out the removed parts in the order and orientation you remove them, take digital pictures or draw sketches at all stages, watch the spring placements. I also unplug the column looms to give you more room by moving the switches away for the area in the column where you are working.

Once you get far enough down the column you will see the three bolts that are loose, hidden in a sub assembly. I have only been able to tighten two of these over the years. This is a common fault.

Rebuild the column using the reverse of the order you removed it.

Good luck

Apr 11, 2009 | 1991 Chevrolet Astro Extended

1 Answer

My steering wheel is loose.


your steering wheel has splines . they strip or worn cant tighten have to replace steering wheel . it has a nut under the horn pad .it might have come loose. but i have never seen one come a lose. but i have known the splines wear on them. disable air bag in steering wheel before removing steering wheel.

Mar 31, 2009 | 2002 Ford Escape

1 Answer

Steering really heavy on my renault master van


Hi

Sounds very much like a loose, or split pulley drive belt.

Open the bonnet and check, I am pretty sure this is where the problem lies.

You just need a new belt !

Good Luck !

Please give me a FixYa rating Please !


John.

Feb 05, 2009 | 2003 Renault Sportwagon

Not finding what you are looking for?
Cars & Trucks Logo

1,325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...