Question about 2000 Buick LeSabre

1 Answer

2000 Buick Lesabre: Driver Door 1. Do I have to disarm the air bags to replace glass? 2. How do I pry off the inside driver side door panel components? 3. HOw do I replace the inside driver side door panel components?

Posted by on

  • Anonymous Mar 21, 2014

    Disconnect driver's side air bag

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Hello, NO you don't have to disarm airbags for glass.
You can pry off the door panel with big flathead screw driver. The panel is held on by plastic tabs that pry off and you can press them back on with fingers.
Before prying off panel, you should pry off electric window button panel. Also remove any screws that are visible. Sometimes the arm rest has little plastic covers with screws underneath it.
This is actually easier than it sounds.
Just remove any visible screws, and pry it off and lift up and she'll come off.

Posted on May 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace the door lock on the drivers side of my 1999 Carerra 911. How do I get to the lock? Through the door on the inside? I don't see screws or the fasteners to loosen to remove the door...


most newer vehicles like this have clips inside door panel that u need a special pry tool to pop door panel off. the door panel just pushes on, also there is small cover over screws that u pry off to expose the screws. there should be 1 or 2 screws that u take out behind inside door handle. and there maybe some on very bottom of door.. when go to take panel off make sure you disconnect car battery just in case as not to set off air bag if it has one. its really quite simple just make sure when taking off door panel to use the right tools and be gentle. you can can buy the pry tool at any auto parts store. hope this helps

Jan 16, 2011 | 1999 Porsche 911 Carrera

1 Answer

Driver side front door window will not move. Some sound, but no movement. How to Replace Window motor regulator on this 2000 Buick LaSabre Limited driver's door with multiple controls: Locks, speakers,...


First the door panel must be removed,then you can tell what part is broken.It will probably be the window trac assy.To replace that you must drill out the 3/16 rivets that hold it in and then replacethem with 1/4 -20 bolts on re-assembly.

Aug 05, 2010 | 2000 Buick LeSabre

3 Answers

2000 Buick Lesbre - Intermittant electrical: Door


THE PROBLEM SOUNDS LIKE LOOSE WIRING CONECTIONS IN THE DRIVERS DOOR , BEST THING TO DO IS HAVE A LOOK OPEN UP DOOR PANEL AND CHECK ALL CONECTIONS, GOOD LUCK

Oct 22, 2009 | 2000 Buick LeSabre

1 Answer

Air conditioning in 2000 lesaber


Vent door between the two sides isn't opening or the flex hose going between the two is off.

Jun 03, 2009 | 2000 Buick LeSabre

1 Answer

Air conditioning in 2000 LeSabre


problem with blend door either stuck or linkage problem

Jul 12, 2017 | 2000 Buick LeSabre

1 Answer

Door handle


the inside handle and otside both work the release seperate.
what you need to do is take the door panel off the inside by a couple screws (usually in the arm rest) and several plastic clips
around the perimiter which will pull out when you pry out on the panel. You can do this carefully with a screw driver but the proper
fork tool from parts store will be easier. look inside door at latch
and see if your piece is broke or possibly the rod may have just come out and need to be put back in place. If your handle piece is broke it is easy to replace once your inside the door.

Sep 04, 2008 | 1991 Buick LeSabre

2 Answers

2000 buick lesabre 3800 has warm air blowing out two driver side vents in A/C mode, but the two passenger side vents are blowing cold. any suggestions?


I had same problem on 2000 Lesabre blowing cold on passenger and warm on driver. I fixed it by adding more freon even though it had 28 pounds of preasure. Now it works great!

Jul 30, 2008 | 2001 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...